Cameron Posted January 2, 2022 Author Report Posted January 2, 2022 9 minutes ago, Gábor said: Ok, I understand it is still under consideration, but please... Apply this asap please, this would give a lot for immersion. Don't worry about immersion. Just wait. I promise. You've never experienced immersion in ANY sim like you will with this. We have not told everything about this product yet. 4
Gábor Posted January 2, 2022 Report Posted January 2, 2022 My faith in you guys! Will be instant buy whatsoever... 2
captaintull Posted January 3, 2022 Report Posted January 3, 2022 Can’t wait for this, I have been flying your TBM pretty much from day 1 and I’m still flying it to this day after 3 years, it’s the best plane ever in my opinion, nothing touches it so I can’t bloody wait for this one…. Sooooo loooking forward to it!! ……. Meggga!! Regards Paul (54 year old simmer! ) EGCC 5
Black2306 Posted January 3, 2022 Report Posted January 3, 2022 I'm really looking forward to this product. It looks like I'm moving into business aviation. UUWW Moscow 1
Black2306 Posted January 3, 2022 Report Posted January 3, 2022 Guys, where can I watch the stream that is scheduled for today?
Goran_M Posted January 3, 2022 Report Posted January 3, 2022 21 minutes ago, Black2306 said: Guys, where can I watch the stream that is scheduled for today? 1
Rhinozherous Posted January 3, 2022 Report Posted January 3, 2022 (edited) I have a question about hardware button assignments. As the CL650 has most of the display controls on the pedestal, is it possible to assign all of them to hardware buttons via the Xplane menu (meaning no complicated searching for bindings via plugins and so on...)? I use a lot of hardware buttons (6 cougar MFDs, Honeycomb Bravo Throttle and Alpha Yoke)... will I be able to bind all important buttons to my hardware? I talk mainly about Autopilot, overhead, fms and the above mentioned display controls. Thank you! Edited January 3, 2022 by Rhinozherous
gigabenga Posted January 3, 2022 Report Posted January 3, 2022 1 hour ago, Rhinozherous said: I have a question about hardware button assignments. As the CL650 has most of the display controls on the pedestal, is it possible to assign all of them to hardware buttons via the Xplane menu (meaning no complicated searching for bindings via plugins and so on...)? I use a lot of hardware buttons (6 cougar MFDs, Honeycomb Bravo Throttle and Alpha Yoke)... will I be able to bind all important buttons to my hardware? I talk mainly about Autopilot, overhead, fms and the above mentioned display controls. Thank you! You're a joke, aren't you? The plane is only for professionals, not for P3d children:) lool
Rhinozherous Posted January 4, 2022 Report Posted January 4, 2022 7 hours ago, gigabenga said: You're a joke, aren't you? The plane is only for professionals, not for P3d children:) lool Okay mister professional. Now please let the adults talk.
Pils Posted January 4, 2022 Report Posted January 4, 2022 9 hours ago, Rhinozherous said: I have a question about hardware button assignments. As the CL650 has most of the display controls on the pedestal, is it possible to assign all of them to hardware buttons via the Xplane menu (meaning no complicated searching for bindings via plugins and so on...)? I use a lot of hardware buttons (6 cougar MFDs, Honeycomb Bravo Throttle and Alpha Yoke)... will I be able to bind all important buttons to my hardware? I talk mainly about Autopilot, overhead, fms and the above mentioned display controls. Thank you! Yes, basically everything you’d interact with has a command (or multiple). I’ll publish my (unofficial) Bravo configuration that covers the LEDs and AP knobs to the forum upon release. (Source: beta tester.) 2
Rhinozherous Posted January 4, 2022 Report Posted January 4, 2022 25 minutes ago, Pils said: Yes, basically everything you’d interact with has a command (or multiple). I’ll publish my (unofficial) Bravo configuration that covers the LEDs and AP knobs to the forum upon release. (Source: beta tester.) Thank you very much!
Kimo Posted January 5, 2022 Report Posted January 5, 2022 Watching the previews, what an amazing job you guys have done. The FBO is a really nice feature. 2
Marder1986 Posted January 5, 2022 Report Posted January 5, 2022 The Job from Hotstart Team is Outstanding... Push the real as it gets to a new Level of immersion.... absoluty Pufff only words i can find is WOW! 1
mesae Posted January 5, 2022 Report Posted January 5, 2022 Stunning. Except for full-motion (which I have always thought was over-rated in terms of cost/benefit to training) this may be as good as, or in some ways better than, the full-motion CL650 sims I use every year. I WANT IT NOW! It happens that I start annual 650 recurrent three days after this beauty is released. It will be interesting to compare. 1
Rhinozherous Posted January 5, 2022 Report Posted January 5, 2022 Hard to find a POH for the CL650 on the Internet... Will we find something like this in the download after buying?
Cameron Posted January 5, 2022 Author Report Posted January 5, 2022 3 minutes ago, Rhinozherous said: Hard to find a POH for the CL650 on the Internet... Will we find something like this in the download after buying? There will be a QRH, but not POH. There WILL be helpful ways outside of the POH to help you get along though. No worries! 1
Rhinozherous Posted January 5, 2022 Report Posted January 5, 2022 20 minutes ago, Cameron said: There will be a QRH, but not POH. There WILL be helpful ways outside of the POH to help you get along though. No worries! Sounds promising Thanks
flyingfudge Posted January 5, 2022 Report Posted January 5, 2022 22 minutes ago, Cameron said: There will be a QRH, but not POH. There WILL be helpful ways outside of the POH to help you get along though. No worries! Good news about the QRH. I thought Toto said he wasn't going to write one. Outstanding achievement to produce an aircraft of this quality and system depth.
364sim Posted January 5, 2022 Report Posted January 5, 2022 Good day, Thanks for all your dedication to this project! Looks great! Will this airplane support muti monitor setups? I personally use 3x 43" 1080p tvs. Thanks
Cameron Posted January 5, 2022 Author Report Posted January 5, 2022 2 minutes ago, 364sim said: Good day, Thanks for all your dedication to this project! Looks great! Will this airplane support muti monitor setups? I personally use 3x 43" 1080p tvs. Thanks Are there aircraft that don't?
tull Posted January 5, 2022 Report Posted January 5, 2022 I will be buying this for sure on release, I cant wait....awesome video last night!! In reality if I was picking one up for real from Bombardier itself would it be from Downsview Airport (CYZD) ??? Regards Paul EGCC
09tir98 Posted January 5, 2022 Report Posted January 5, 2022 33 minutes ago, tull said: I will be buying this for sure on release, I cant wait....awesome video last night!! In reality if I was picking one up for real from Bombardier itself would it be from Downsview Airport (CYZD) ??? Regards Paul EGCC The Challenger is built at Montréal–Trudeau airport CYUL.
captaintull Posted January 5, 2022 Report Posted January 5, 2022 Ohh right…. Thanks for correcting me!
Recommended Posts