Jump to content

Plugins and Utilities

83 files

  1. iGoDispatch JRollon CRJ-200

    By iGoApp

    Flight planning tool for JRollon CRJ-200. It calculates weights, fuel, reference speeds, balance, pitch trim, and many other values that you need for your flight.
    It is Windows only for the time being. It should be available on other platforms later.
    Have a safe flight!
    Please vote if you liked the application.

    243 downloads

    Updated

  2. iGoConnect

    By iGoApp

    iGoConnect is an X-Plane plugin that connects X-Plane to iGoDispatch – an application (Windows, Mac, iOS, and Android) developed for LES Saab-340A, JRollon's CRJ-200, and IXEG's Boeing-733.
    The plugin performs the following functions:
    Identifies airports, waypoints, airways and navaids included in the flight plan and sends to the client navdata for each of these points. Navdata is selected from the following X-Plane files (apt.dat, earth_fix.dat, earth_awy.dat, and earth_nav.dat). Receives from the client loading information (i.e., Center of Gravity offset, payload weight, and fuel weight) and adjust the corresponding datarefs in X-Plane. Periodically parses to the client the following ACARS data: plane’s position (latitude and longitude); heading (true and magnetic); weight; available fuel; current fuel flow; ground speed; and altitude. In X-Plane 11, dynamically adjusts the plane's Center of Gravity during a flight resulting in greater flight realism. In X-Plane 12, this is implemented by the simulator. Monitors flight performance based on approximately 20 parameters, identifies potential issues during the flight, and sends the report to the client. IMPORTANT!
    If you have MacOS Catalina (10.15) or higher, it is possible that after downloading and installing the plugin, you will not find it in the X-Plane's menu. This error is caused by the MacOS security protocols during the X-Plane start-up process that references a Mac.xpl file. If you do not see iGoConnect in the menu of the simulator, the following link explains how to solve the problem: https://x-plane.helpscoutdocs.com/article/26-mac-xpl-not-starting.
    If you have problems connecting the iGoDispatch application to the computer with X-Plane running, it is most likely that your Firewall is blocking the TCP connection. You need to open the port to allow connection between your iPad and computer.
    For Windows:
    Go to Control Panel > Windows Firewall Click on "Advanced Settings" in the left-hand pane. Click on "Inbound Rules" and then "New rule". Select "Port", click next, select "TCP", and enter "7767" as the local port. Click next, and allow the connection. Click next again, and ensure that "Domain", "Private" and "Public" are all ticked. Name your firewall rule, e.g. "iGoConnect", and then save it. For Mac:
    Go to System Preferences, and choose the Security and Privacy Tab. Click on the Firewall Tab, and the Firewall options button. The page will show you the applications that are allowed access through your firewall Add new applications to the list by clicking on the plus icon.  
    If you use third-party firewalls, they have their own procedures of adding Ports to TCP connections that may differ from those that I provide in my manual. You need to follow their specific instructions.
    For example, if you have McAfee in Windows, follow these steps:
    Open McAfee Total Protection; Open Web and Email Protection; Open Firewall; Open Ports and System Services; Click Add; System Service Name: iGoDispatch. Local TCP/IP Ports: 7767. Open ports to: All PCs. Forward port activity: checked. Click Save. The Manual is also available here: http://igoapp.ca/page_igoconnect/igoconnect_manual.html
    The plugin supports Windows, Mac (OS X versions 10.7 or later), and Linux.

    354 downloads

    Updated

  3. HotStart Challenger 650 Popout Panel combinations

    By Tebro

    This is a simple plugin for the HotStart Challenger 650 that allows the user to define combinations of popout panels. These combinations can then be bound to a button as a command.
    Read the README.md file in the package Documentation. The most important note is that this is installed into the Aircraft plugins! Not global X-Plane plugins.
     

    91 downloads

    Updated

  4. Hot Start Challenger 650 - Second Anniversary Group Flight (OFPs, Decal)

    By ois650

    Hot Start Challenger 650 - Second Anniversary Group Flight (OFPs, Decal)

    126 downloads

    Submitted

  5. Ground Handling Deluxe SET for IXEG 737-300 for X-Plane 12

    By VasilisMaximos

    This is a custom set for the IXEG 737-300 X-Plane 12 version.
    It is compatible with Ground Handling Deluxe by JarDesign.
    You must own the Ground Handling Plugin Deluxe edition by Jar Design, 
    in order to use this file. For the istallation just move the file IXEG737ClassicP.set to the
    :\X-Plane 12\Resources\plugins\GndHandling\Sets\Custom
    folder and enjoy
    .........
    Vasilis.




    156 downloads

    Updated

  6. Gr7 Sidewinder extension + Rocket launcher extension for the for the AV-8B

    By XPJavelin

    Add up to two supplementary AIM-9 missiles to the British variants of the X-Trident AV-8B.
    Add up to four rocket launchers to the X-Trident AV-8B, each carrying 19 rockets.


    6 downloads

    Submitted

  7. Freighter conversion (P2F or PCF) for the ToLiss 321

    By XPJavelin

    In this package for the ToLiss Airbus, we mimic a main cargo door for the A321P2F / A321PCF, a rigid cargo barrier and some window plugs using a single 3D object that needs to be attached to the model.
    Our custom object is placed under the Etalab Open Licence.
    This object is not part of the ToLiss product. This modification is not approved by the original author at ToLiss and attaching the P2F package to the ToLiss model is done at your own risk. The object does not contain any ToLiss part in order to comply with copyright regulations.

    245 downloads

    Updated

  8. Forbid external view (Lua)

    By XPJavelin

    X-Plane external view is forbidden.
    When you try to switch to an external view while it's not plausible to be outside at that moment, you will be bring back immediately to the virtual 3D cockpit to focus on flying. There is no user interaction with the script, it is running silently in the background at all times.

    Installation
    FlyWithLua required.
    Install the script into .../X-Plane 11/Resources/plugins/FlyWithLua/Scripts/

    11 downloads

    Submitted

  9. FlightFactor Boeing 777-200 Replacement PA Sound Pack by TheFriedchicken

    By TheFriedchicken

    //IMPORTANT
        
        - DO NOT reupoload or distribute on any other site without my permission.
        - The Text-To-Speech (TTS) voice is a payware voice and is not meant for commercial sale
        - This sound pack is for your personal use only
    //Installation
        -Locate your Boeing 777 aircraft folder in X-Plane/Aircraft/Heavy Metal
        -Place the contents of this archive within the 777 directory (ensure that the folder you copy us titled 'sounds')

    329 downloads

    Updated

  10. Finnair: JAR-Design Announcement sound pack

    By PyroLife

    Finnair: announcement V1.4.0
    V1.0.0:  Safety demonstration video for the A320 of Finnair. (2016 version)
    V1.1.0:  Safety demonstration video for A320  (2016 version + 2018 update)
    V1.2.0:  On-Board service information video announcement (2018 version) English with & without Finish language versions. in High/low audio quality.
    V1.2.5:  Safety demonstration video shorter version for other fleet of finnair. + Information & instructions are updated
    V1.3.0:  Before Landing arrival information announcement + Information & instructions are updated
    V1.3.1: Added extra information
    V1.4.0: Added the new safety video & added old safety video in original audio quality.
    Note:
    These files are tested on the JAR Design A320 airbus aircraft.
    i can not confirm if the sound package also can be used for other aircraft.
    I hope i could help you for a wonderful flying experience with Finnair on Xplane!
    Downloads:
    V1.4.0:   Download
     
    Mirrors: 
    V1.4.0:   Download
    To open .7z file: go to 7-zip.org and download the lasttest version

     
    - Please share ur experience. I would love to improve! - 

    16 downloads

    Updated

  11. Finnair: FlightFactor A350 Announcement sound pack

    By PyroLife

    Finnair: announcement V1.0.0
    Instructions:
    1.Unzip the .7z / .zip file  
    2. Remove the (1),(2),(1A),(B)... from the filename.  
    3. Go to the X-plane root  
    4. Replace the audio files in the Costumer Avionics folder: (/Xplane/airplanes/(name of ff350 folder)/sounds/PA)
    Note:
    These files are tested on the FF A350 airbus aircraft.
    i can not confirm if the sound package also can be used for other aircraft.
    I hope i could help you for a wonderful flying experience with Finnair on Xplane!
    Downloads:
     

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    - Please share ur experience. I would love to improve! - 

    42 downloads

    Updated

  12. Expanded 737 Classic Checklist Replacement

    By dr_nerdrage

    Hey everyone,
    I found the stock checklist to be a little basic, so I made this expanded checklist in a style that I believe fits the aircraft. Checklist is based on real airline checklist for the 737-300. Big thanks to P3ROn for the help.

    (Please note that the preview image compression makes the checklist harder to read than it is in sim.)
    Installation instructions:
    1. Go to your X-Plane 10\Aircraft\X-Aviation\IXEG 737 Classic folder
    2. Make a backup of the current IXEG_checklist.png file (e.g. by renaming it to "IXEG_checklist.png.old")
    3. Copy this downloaded IXEG_checklist.png to the IXEG 737 Classic folder
    4. Enjoy.
    Please note that this checklist is not an official IXEG checklist. If you have any comments or gripes, they belong here or to me via PM. I can also be contacted at doctornerdrage@gmail.com.
    Safe flying!

    1,498 downloads

    Updated

  13. Environment+

    By Dusty926

    Hello, and welcome to Environment+, or Enviro+ for short! The new and improved mod for your sim environment! The Enviro is what we've done to make the sim so much more immersive, and the + is your contribution to it! We love seeing what people will add on top of it! From skycolours, to cloud textures, to tweaks of the .lua itself!
    This mod primarily came about when I noticed that most other .luas had their clouds placed as much as 7,000+ feet above where they were supposed to be! To bring the weather back down to its proper layer and keep it looking nice was a difficult, time consuming task, but with the help of MagikarpDrowned (Creator of the famous Project Better X-Plane), we've crafted an amazing new environment. 
    This of course isn't simply a .lua tweak, which is why it's not called any old .lua tweak. It's an environment tweak, and that means it comes with cloud textures! Courtesy of FSEnhancer's amazing work laying out the clouds, and Magikarp's tweaks to their already fantastic puffs, we've got some perfect fits for the new environment! I greatly encourage using the skycolours from the aforementioned mod, or Soft Cloud Art's similarly stunning skycolours!
    But, you may be wondering, "What if the textures tank my FPS? What if it doesn't perform as well? What if I just don't have the VRAM for it?" Well, I had thought about that a lot, and that's why the .lua was primarily built to focus on making the DEFAULT cloud textures as magnificent as possible. If you have performance issues, or just prefer the look, I greatly encourage you try out the default X-Plane 11 cloud textures with this .lua! 
    Which leads me to tell you to MAKE A BACKUP OF YOUR DEFAULT CLOUDS. They can be found in Resources/bitmaps/world/clouds.
    Now, the .lua was designed to be the tweaking man's .lua, so if you encounter issues, performance or visual, dive into the .lua! I've written down some notes and suggestions within it for you to be mindful of, and I highly encourage you toy around with the various settings to see what sticks with you!
    To install Enviro+, dive into the Enviro+ folder and place Resources in your X-Plane installation folder, right where the .exe is! It'll ask you to overwrite some cloud textures. If you use vanilla or other cloud textures that you don't wish to replace right now, simply choose not to overwrite, and everything else will install as planned!
    I hope you enjoy Enviro+, and I can't wait to see how it might evolve in the future! Take care, and have at 'er!
    Requires FlyWithLua

    https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-complete-edition-for-x-plane-11-windows-linux-mac-os-x-version/
    Clouds courtesy of FSEnhancer, without it I wouldn't have such fitting clouds to go with the .lua! Do please check out their Skycolours too! Ooh and ESPECIALLY their sun textures! Their sun textures in particular are stupidly amazing!

    https://forums.x-plane.org/index.php?/files/file/41411-fsenhancer-alpha-version/
    Shoutout to Soft Cloud Art for inspiring me to finish up the finer details of this .lua, and also having some amazing Skycolours of its own!

    https://forums.x-plane.org/index.php?/files/file/40952-soft-cloud-art/












    506 downloads

    Updated

  14. Enable random failures for HotStart Challenger 650

    By Tom Stian

    This LUA script enables random failures for the HotStart Challenger 650.
    Requirement:
    The script requires FlyWithLua: Download the correct version for your simulator.

    FlyWithLua for X-Plane 11:
    - https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
    FlyWithLua for X-Plane 12:
    - https://forums.x-plane.org/index.php?/files/file/82888-flywithlua-ng-next-generation-plus-edition-for-x-plane-12-win-lin-mac/
    Installation:
    - Unzip the files in [X-Plane]\Resources\plugins\FlyWithLua\Scripts
    Settings: (edit the lua script)
    -- Here you set if the failures should be default enabled or disabled when your starting up X-Plane.
    -- You can also enable and disable this option (for the current session) in the FlyWithLua menu.
    -- Set true to enable failures, false to disable. Default is true. true and false have to be written with lowercase letters.
    EnableFailures_WizVar = true
    -- Mean time between failures (MTBF) is the predicted elapsed time between inherent failures of a system during operation.
    -- Default is MTBF_hours = 10.0
    local MTBF_hours = 10.0
    -- Max failures pr session
    -- Default is Max_Failures = 2
    local Max_Failures = 2

    -- Severity 1 to 5. 1 least severe, 5 most severe. i.e. if you select 3, you will get failures from severity 1 to 3.
    local Severity = 5
    -- Clear all failures when starting x-plane. Default is false. true and false have to be written with lowercase letters.
    local ClearAllFailures = false
    Logfile:
    When a failure occurs it will log the event to the logfile Wizball_CL650_Failures.log in your X-Plane root folder.
    example:

     
    MTBF:
    This graph shows a example how often you can expect a failure when you set the MTBF to 10 hours.

     
    Failures included in the script:
    CL650/failures/systems/ats/failed/state Auto Throttle System has failed CL650/failures/systems/ats/msd/1/failed/state Left ATS MSD has failed CL650/failures/systems/ats/msd/2/failed/state Right ATS MSD has failed CL650/failures/systems/afcs/yd/1/failed/state Yaw Damper Channel 1 has failed CL650/failures/systems/afcs/yd/2/failed/state Yaw Damper Channel 2 has failed CL650/failures/systems/elec/comp/HTR_L_WSHLD_1/failed/state Left windshield heater 1 has failed CL650/failures/systems/elec/comp/HTR_L_WSHLD_2/failed/state Left windshield heater 2 has failed CL650/failures/systems/elec/comp/R_WSHLD_1/failed/state R windshield heater 1 has failed CL650/failures/systems/elec/comp/R_WSHLD_2/failed/state R windshield heater 2 has failed CL650/failures/systems/elec/comp/HTR_R_WIND/failed/state Right window heater has failed CL650/failures/systems/elec/comp/CABIN_TEMP_SENSE/failed/state Cabin temperature sensor has failed CL650/failures/systems/elec/comp/LDG_TAXI_LTS_R_NOSE/failed/state Right nose LDG-taxi lights has failed CL650/failures/systems/elec/comp/LDG_TAXI_LTS_R_WING/failed/state Right wing LDG-taxi lights has failed CL650/failures/systems/elec/comp/HTR_L_WIND/failed/state Left window heater has failed CL650/failures/systems/elec/comp/ANTI_SKID_1/failed/state Anti-skid 1 has failed CL650/failures/systems/elec/comp/AUTO_THROTTLE/failed/state Autothrottle has failed CL650/failures/systems/elec/comp/CABIN_TEMP_CONT_AUTO/failed/state Cabin temp ctrl (auto) has failed CL650/failures/systems/elec/comp/ANTI_SKID_2/failed/state Anti-skid 2 has failed CL650/failures/systems/elec/comp/STAB_CH_1_HSTCU/failed/state Stab trim channel 1 ctrl has failed CL650/failures/systems/elec/comp/STAB_CH_2_HSTCU/failed/state Stab trim channel 2 controller has failed CL650/failures/systems/iceprot/wnd_heat/1/failed/state Left window heat has failed CL650/failures/systems/iceprot/wnd_heat/2/failed/state Left windshield heat has failed CL650/failures/systems/iceprot/wnd_heat/3/failed/state Right windshield heat has failed CL650/failures/systems/iceprot/wnd_heat/4/failed/state Right window heat has failed CL650/failures/env/birdstrike/strike/state Birdstrike that doesn't lead to any damage CL650/failures/env/smoke/baggage/state Smoke in the baggage bay CL650/failures/env/smoke/lavatory/state Smoke in the toilet CL650/failures/systems/elec/ac/gen/1/failed/state Generator 1 has failed CL650/failures/systems/elec/ac/gen/2/failed/state Generator 2 has failed CL650/failures/systems/elec/comp/HYD_PMP_3B/failed/state Hydraulic pump 3B has failed CL650/failures/systems/elec/comp/HYD_PMP_2B/failed/state Hydraulic pump 2B has failed CL650/failures/systems/elec/comp/HYD_PMP_3A/failed/state Hydraulic pump 3A has failed CL650/failures/systems/elec/comp/HYD_PMP_1B/failed/state Hydraulic pump 1B has failed CL650/failures/systems/elec/comp/FLAP_MOTOR_2/failed/state Flap motor 2 has failed CL650/failures/systems/elec/comp/FLAP_MOTOR_1/failed/state Flap motor 1 has failed CL650/failures/systems/elec/comp/HUD/failed/state Heads Up Display has failed CL650/failures/systems/hyd/1/pump/A/state Engine-driven pump 1A has failed CL650/failures/systems/hyd/1/pump/B/state AC electric pump 1B has failed CL650/failures/systems/hyd/2/pump/A/state Engine-driven pump 2A has failed CL650/failures/systems/hyd/2/pump/B/state AC electric pump 2B has failed CL650/failures/systems/hyd/3/pump/A/state AC electric pump 3A has failed CL650/failures/systems/hyd/3/pump/B/state AC electric pump 3B has failed CL650/failures/sensors/ads/pitot/3/leak_small/state Standby pitot tube is leaking pressure (inaccurate speed reading) CL650/failures/avionics/efis/hud/failed/state Heads Up Display has failed CL650/failures/systems/eng/left/compr/stall/trans/state Left engine compressor stall (transient, self-clearing) CL650/failures/systems/eng/right/compr/stall/trans/state Right engine compressor stall (transient, self-clearing) CL650/failures/systems/eng/left/oil/pump/weak/state Left engine oil pump is producing low pressure and low flow CL650/failures/systems/eng/right/oil/pump/weak/state Right engine oil pump is producing low pressure and low flow CL650/failures/env/birdstrike/windshield/state Birdstrike that leads to the left windshield's outer pane shattering CL650/failures/systems/aircond/leak/500/state Cabin is leaking pressure at ~500 ft/min CL650/failures/systems/comm/sdu/1/failed/state Satellite Data Unit 1 has failed CL650/failures/systems/comm/sdu/2/failed/state Satellite Data Unit 2 has failed CL650/failures/systems/fuel/tank/aux/leak/slow/state Auxiliary tank is leaking slowly CL650/failures/systems/fuel/tank/main/left/leak/slow/state Left main tank is leaking slowly CL650/failures/systems/fuel/tank/main/right/leak/slow/state Right main tank is leaking slowly CL650/failures/systems/fuel/tank/tail/leak/slow/state Tail tank system is leaking slowly CL650/failures/systems/hyd/1/leak_slow/state Hydraulic system 1 is leaking slowly CL650/failures/systems/hyd/2/leak_slow/state Hydraulic system 2 is leaking slowly CL650/failures/systems/hyd/3/leak_slow/state Hydraulic system 3 is leaking slowly CL650/failures/sensors/ads/pitot/1/leak_small/state ADC 1 pitot tube is leaking pressure (inaccurate speed reading) CL650/failures/sensors/ads/pitot/2/leak_small/state ADC 2 pitot tube is leaking pressure (inaccurate speed reading) CL650/failures/avionics/efis/pfd/1/failed/state PFD 1 has failed CL650/failures/avionics/efis/mfd/1/failed/state MFD 1 has failed CL650/failures/avionics/efis/mfd/2/failed/state MFD 2 has failed CL650/failures/avionics/efis/pfd/2/failed/state PFD 2 has failed CL650/failures/avionics/efis/isi/failed/state ISI has failed CL650/failures/avionics/efis/isi/pitot/state ISI pitot sensor has failed CL650/failures/avionics/efis/isi/static/state ISI static sensor has failed CL650/failures/avionics/efis/isi/att_fail/state ISI attitude indication has failed CL650/failures/avionics/efis/isi/att_drift/state ISI attitude indication is drifting randomly CL650/failures/systems/oxygen/tank/leak/slow/state Oxygen tank is leaking slowly CL650/failures/systems/eng/left/n1_vib_high/state Left engine is experiencing excessive N1 vibration CL650/failures/systems/eng/left/n2_vib_high/state Left engine is experiencing excessive N2 vibration CL650/failures/systems/eng/left/combust/flameout/trans/state Left engine combustion has flamed out (momentarily) CL650/failures/systems/eng/right/n1_vib_high/state Right engine is experiencing excessive N1 vibration CL650/failures/systems/eng/right/n2_vib_high/state Right engine is experiencing excessive N2 vibration CL650/failures/systems/eng/right/combust/flameout/trans/state Right engine combustion has flamed out (momentarily) CL650/failures/systems/aircond/leak/1000/state Cabin is leaking pressure at ~1000 ft/min CL650/failures/systems/ats/svo/1/failed/state Left ATS Servo has failed CL650/failures/systems/ats/svo/2/failed/state Right ATS Servo has failed CL650/failures/systems/elec/comp/FMS_CDU_2/failed/state CDU 2 has failed CL650/failures/systems/elec/comp/FMS_CDU_3/failed/state CDU 3 has failed CL650/failures/systems/elec/comp/FMS_CDU_1/failed/state CDU 1 has failed CL650/failures/systems/fuel/tank/aux/leak/fast/state Auxiliary tank is leaking quickly CL650/failures/systems/fuel/tank/main/left/leak/fast/state Left main tank is leaking quickly CL650/failures/systems/fuel/tank/main/right/leak/fast/state Right main tank is leaking quickly CL650/failures/systems/fuel/tank/tail/leak/fast/state Tail tank system is leaking quickly CL650/failures/systems/hyd/1/leak_fast/state Hydraulic system 1 is leaking quickly CL650/failures/systems/hyd/2/leak_fast/state Hydraulic system 2 is leaking quickly CL650/failures/systems/hyd/3/leak_fast/state Hydraulic system 3 is leaking quickly CL650/failures/systems/oxygen/tank/leak/fast/state Oxygen tank is leaking quickly CL650/failures/systems/eng/left/compr/stall/clear/state Left engine compressor stall (clearable by reducing power) CL650/failures/systems/eng/right/compr/stall/clear/state Right engine compressor stall (clearable by reducing power) CL650/failures/env/birdstrike/pitot/left/state Birdstrike that leads to the left pitot tube becoming blocked CL650/failures/env/birdstrike/pitot/right/state Birdstrike that leads to the right pitot tube becoming blocked CL650/failures/systems/aircond/leak/fast/state Cabin is leaking pressure quickly CL650/failures/systems/gear/handle/failed/state Landing gear handle failed CL650/failures/systems/gear/nose/leg/act/failed/state Nose gear leg actuator has failed CL650/failures/systems/gear/main/left/leg/act/failed/state Left gear leg actuator has failed CL650/failures/systems/gear/main/right/leg/act/failed/state Right gear leg actuator has failed CL650/failures/sensors/rss/gps/1/failed/state GPS 1 receiver has failed CL650/failures/sensors/rss/gps/2/failed/state GPS 2 receiver has failed CL650/failures/systems/eng/left/combust/flameout/perm/state Left engine combustion has flamed out (permanently) CL650/failures/systems/eng/right/combust/flameout/perm/state Right engine combustion has flamed out (permanently) CL650/failures/env/birdstrike/eng/left/state Birdstrike that leads to a non-recoverable left engine failure CL650/failures/env/birdstrike/eng/right/state Birdstrike that leads to a non-recoverable right engine failure

    239 downloads

    Updated

  15. DesignXPlaneObjects Manual

    By tesal

    This manual is intended for newbies and summarizes my learning experience to develop aircraft models for X-Plane
    The manual covers the following items:

    1. Getting and processing the Blueprints
    2. Preparing the master images to be used in the Texture Map
    3. Notes on developing an aircraft model using Plane-Maker
    4. Using AC3D to develop the aircraft X-Plane objects
    5. Using the AC3D texture Coordinator
    6. Animations
    7. Tuning the AC3D model to the Plane Maker model
    8. Exporting the AC3D files as X-Plane objects
    9. 3D cockpits basic designYou may use this manual and included attachments freely and without any type of restriction

    221 downloads

    Submitted

  16. delete please.

    By Tom Stian

    delete please

    42 downloads

    Updated

  17. Default Cessna 172SP Librain with xLua

    By ilias.tselios

    Librain implementation for Laminar's Cessna 172SP. 
    This implementation is based on an improved version of Laminar's xLua plugin (included) by "aeroplane" and a small part, by me. This way,  you avoid to use an extra plugin to get rain effects.
    C-172SP G1000 Walkaround
    Do the following to make it work  (credits Todir):
    Open the file Cessna_172SP_G1000_cockpit.obj with a text editor. Find the last line starting with IDX (should be IDX5455 - Line 7428) Add just below and above the line that says ANIM_begin the line:
    ATTR_cockpit. Save the file and enjoy flying in the rain! In the future will be included in the download.
     
    SPECIALLY FOR DEVELOPERS/TINKERS! :
    You can use this release as an example of how to use the librain plugin with xLua.
     
    ABOUT xLua Plugin :
    The xLua plugin here is an improved version of Laminar's xLua plugin, which already exists in the aircraft.
    The new version adds the ability to:
    Print log info to Log.txt file for debugging. Returns a global variable "acfFolder", a string with the full path of aircraft's folder.  
    LICENCE: MIT 



    102 downloads

    Updated

  18. CrewPackXP - Crew Callouts

    By N1K

    **Updated 01/04/2022** CrewPackXP is a FlyWithLUA utility designed to add some crew communications for aircraft in X-Plane 11. This includes basic callouts, and in some cases assistance from the PNF in high workload phases of flight. Settings can be adjusted to enable or disable the whole plugin, or just certain features of each aircraft. Flight Factor 757 / 767: - Virtual FO to pre-flight aircraft - Take-off and Landing calls by both crew members - Flight Attendant PA's - Ground Crew positioning of equipment - Virtual FO assistance with go-around procedure Hot Start Challenger 650: - Virtual FO to pre-flight aircraft - Take-off and Landing calls by both crew members Source Code https://github.com/N1K340/CrewPackXP/tree/main/src Documentation http://crewpackxp.readthedocs.io/ Changelog New features and bug fixes are listed in the change log. Installation Copy the Scripts and Modules folders into the main folder of FlyWithLUA: > X-Plane 11 > Resources > plugins > FlyWithLua Once enabled, the First Officer should announce his entry to the cockpit roughly 15 seconds after loading in. CrewPackXP settings can be accessed via the X-Plane menu bar: > Plugins > FlyWithLua > FlyWithLua Macros > Crew Pack Settings Prerequisite This plugin uses the FlyWithLUA plugin to interface with X-Plane. It is available freely from [X-Plane.org](https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/) Luna INI Parser (LIP) is included as an additional plugin module for use with FlyWithLua. This module allows for the saving and reading of settings data within LUA. It has been included in this package under the MIT Licence offered by creator Carreras Nicholas. This is a common plugin; it may already exist in your modules folder causing a prompt to overwrite. Usage The CrewPackXP functions run autonomously based on in sim events, provided the aircraft is enabled within the CrewPackXP settings. Refer to each aircraft's entry in the manual for details on settings and features available. Disclaimer / Feedback This package is to be distributed as Freeware only under the GPL v3 license. This is the first time I have coded a plugin, any feedback is welcome. Bug reports, please include the x-plane log.txt file in the main x-plane folder for the flight in question. Acknowledgements Carreras Nicholas - Luna INI Parser (LIP) 'Togfox' - FSE HUD 'X-Friese' - FlyWithLUA Plugin 'mkultra44' - Documentation proofing Current Script Versions - Flight Factor 767 - 1.4 - Hot Start CL650 - 1.4



    134 downloads

    Updated

  19. CJ525 N1 Calculator

    By Matchstick

    About This File
    About N1 Calculator
    This is a simple Fly With LUA script to read the N1 Alt/Temp data for the Torquesim CJ525 from .csv files and display the current max N1 value in a window for the current conditions and flight mode.
    It also reads and displays the recommended Climb Speeds for either Standard or Cruise climb when Climb in mode.
    Additionally there are options to display the N1 value on the Memo display and the Climb speed using the ASI bug for a more natural in-cockpit experience.
    The latest version of the code will always be available from it's Github Repository under "Releases"
    Prerequisites
    FlyWithLua plugin must be installed and working correctly - plugin was developed using FWL v2.8.10 on Windows 11.
    (The plugin should be be compatible with the Mac and Linux versions of the CJ525 and FWL but I'm unable to test and confirm that myself.)
    Installing N1 Calculator
    Extract the contents of the Zip file into the \plugins\FlyWithLua\Scripts folder including the CJ525_data folder (these are the .csv data files read by the plugin)

    Using N1 Calculator

    The plugin window should be automatically displayed when you start a flight in the CJ525.
    You can Change the Flight mode between Take-Off, Climb, Cruise and Go-Around using the List Box at the top and use the checkboxes to specify if engine Anti-Ice is on or off and whether to send the data to the In-cockpit Memo.
    When in Climb mode the window also shows the recommended Climb speed for the Altitude as well as a checkboxes to specify whether to send the Climb Speed to the ASI bug and select Cruise Climb.
    Note - when the Set Memo Display is set this prevents manual setting of the Memo fields so the checkbox should be disabled if the Memo are to be used for anything else. Similarly when the Set ASI Bug is set and the calculator is in climb mode the ASI Bug cannot be manually set. (it can be manually set in other modes even if the checkbox was set during Climb mode)

    17 downloads

    Updated

  20. CHECKLIST FOR TORQUESIM CITATION 525 TDS GTNXi 750

    By jacksparrow

    Hello All,
    This is a check list file for the Torquesim Citation 525 TDS GTNXi 750. Nothing to do but place this file in the Torquesim Citation 525 folder in x-plane 12 and enjoy.
    The check list is the same as the checklist in the Citation 525 drop down, I just created a "ace" file for the TDS GTNXi 750 to read. Once the file is added the system will recognize it. Go to your Utility Tool box in the GTNXi 750 and you will see checklist, click on that button and away you go. Very simple.
    Leave your comments and thoughts and how you like it.
    The file name is....       checklist.ace           and it must be this name to have the system find it.
    checklist.ace

    6 downloads

    Submitted

  21. Checklist for Laminar's MD-82

    By CaptainSpaulding

    Here is the complete checklist for Laminar's MD-82, to be used with Xchecklist.
    Special thanks to Kev (unrealaviation) for the help and contribution.

    Enjoy.

     


    ...and so on.

    154 downloads

    Updated

  22. Checklist for Embraer 190 by Supercritical Simulation Group

    By broberts542129

    Checklist for Embraer E190 by Supercritical Simulation Group.
     

    The checklist was developed from a range of documentation with helpful prompts added.
     
    Works with XChecklist by Sparker
     
    Place the clist.txt file in your SSGE-190LRV1 XP10 folder (Same as the .acf file). Done!

    60 downloads

    Updated

  23. Challenger forum notes compilations

    By XPJavelin

    How to take command of this new aircraft as a complete beginner on the CL650 type ?
    All my compilations of forum notes that were very useful in the first hours !
    March 2022 version.

     

    493 downloads

    Updated

  24. Cabin mounted video camera (CMVC) for the IXEG 737

    By XPJavelin

    This is the  cockpit display of the "IXEG 737 Video System".
    How it works
    This cockpit display is powered by DC BUS 1. The screen will be on at all times when this electrical bus is energized.
    Installation
    1) drop files into X-Plane 11\Aircraft\X-Aviation\IXEG 737 Classic\objects. There are 3 files.
    2) Open Plane Maker -> Misc 3D objects -> Add 3D object -> Browse to add TV-737.obj. Save the Plane. Exit Plane Maker.
    Done !


    136 downloads

    Updated

  25. BN-2B More Commands

    By Ch.Cole

    This flywithlua script adds nine commands which can be found under FlyWithLua/BN2P
    Installation: Drop the lua into your script folder.
    Four for the cockpit lights (Off, Full, decrease, increase), the speed to increase and decrease can be adjusted in the file.
    Five for the Ammeter knob (Left Gen, Bat, Right Gen, rotate clockwise, rotate counterclockwise).

    30 downloads

    Updated

×
×
  • Create New...