Litjan Posted May 24, 2020 Report Posted May 24, 2020 22 minutes ago, marpilot said: Thank you for the update After a short try in Beta 9 XP and experimental flight model I noticed only one issue: -ground handling while taxi - difference between nose gear animation and actual behaviour - ground path. In XP11.41 v.1.2 It was good, now it is broken. Cheers to the team! You can watch my latest video where I explain about the ground handling. It is not broken. https://www.youtube.com/watch?v=gXDlZhyKRnk Cheers, Jan 2
Veace Posted May 24, 2020 Report Posted May 24, 2020 (edited) Hi everyone! For does interested in engine paint kit for 1.3 you can find it in the link below I did some small adjustments for the nose cowl and as well for NML file Edited May 24, 2020 by Veace 1 1
silverchord Posted May 24, 2020 Report Posted May 24, 2020 Hi, The FMC has a little lag, while pressing a button. Thats correct. But while this little lag, the Sound also lag and come in again a bit louder than the normal volume of the sound. Its a bit difficult to describe. Most hearable while on Ground, setup the FMC for the Flight with the Air Condition and Avionics sound on.
jatar Posted May 24, 2020 Report Posted May 24, 2020 Has anyone been able to make a holding pattern? Thanks
Cameron Posted May 24, 2020 Author Report Posted May 24, 2020 18 minutes ago, silverchord said: The FMC has a little lag, while pressing a button. Thats correct. But while this little lag, the Sound also lag and come in again a bit louder than the normal volume of the sound. Its a bit difficult to describe. Most hearable while on Ground, setup the FMC for the Flight with the Air Condition and Avionics sound on. Beta or Stable version of Gizmo? 2 minutes ago, jatar said: Has anyone been able to make a holding pattern? Holds are not implemented.
jatar Posted May 24, 2020 Report Posted May 24, 2020 1 minute ago, Cameron said: Beta or Stable version of Gizmo? Holds are not implemented. Thanks Cam
silverchord Posted May 24, 2020 Report Posted May 24, 2020 15 minutes ago, Cameron said: Beta or Stable version of Gizmo? Stable. I'm not able to run the Beta Version... getting some Errors
ayster Posted May 24, 2020 Report Posted May 24, 2020 4 hours ago, Litjan said: Can you try: Opening the default C172 Move your mouse to the right side of the screen and click the key icon that comes out of the menu Activate then Let us know how it goes! If all else fails, revert to the old gizmo (you are using the latest beta, according to your screenshot). Cheers, Jan Hi Jan I have had to revert to the stable Gizmo in order to activate the licence, it didnt work using the c172. Regards Alan
ROBBAN Posted May 24, 2020 Report Posted May 24, 2020 Hi! I have updated to v1.3 with Gizmo 20 Beta and now I can not open IXEG boeing, x-plane 11 crashes Maybe anybody knows how to solve this issue? I send log.text. //Robert Log.txt
Hopkinsstevea Posted May 24, 2020 Report Posted May 24, 2020 I have the same problem with 11.41 and 11.50 Vulcan it won't even load x-plane I can't get anything to work --=={This application has crashed because of the plugin: Gizmo64}==-- Log.txt
Litjan Posted May 24, 2020 Report Posted May 24, 2020 Try the stable version of Gizmo, Robert. Thanks for sending the log! Cheers, Jan
Cameron Posted May 24, 2020 Author Report Posted May 24, 2020 26 minutes ago, silverchord said: Stable. I'm not able to run the Beta Version... getting some Errors Stable version is likely the cause of the stutters you speak of. Beta smooths them out. It's imperative we get information about errors on beta gizmo. Please post about them with screenshots and logs!
Cameron Posted May 24, 2020 Author Report Posted May 24, 2020 1 minute ago, silverchord said: Here we go... Log.txt http://forums.x-pilot.com/forums/topic/17926-failed-update/?do=findComment&comment=150126
Hopkinsstevea Posted May 24, 2020 Report Posted May 24, 2020 I uninstalled then reinstalled - the stable Gizmo version seems to have solved my problem
Cameron Posted May 24, 2020 Author Report Posted May 24, 2020 Just now, Hopkinsstevea said: I uninstalled then reinstalled - the stable Gizmo version seems to have solved my problem The above should also work that I posted before you.
jeffreymg Posted May 24, 2020 Report Posted May 24, 2020 I have reinstalled again with the X-Plane 11 checked stable version used. This is the version that shows in the files. Jeffg
berilojr Posted May 24, 2020 Report Posted May 24, 2020 Hey guys, I'm really grateful for this update and looking forward to the next one. Just one question. Do you have any expectations to make it VR ready and compatible? There is a really small tune needed on the knobs to make them more usable because they are very sensitive. Thanks!
Litjan Posted May 24, 2020 Report Posted May 24, 2020 6 minutes ago, berilojr said: Hey guys, I'm really grateful for this update and looking forward to the next one. Just one question. Do you have any expectations to make it VR ready and compatible? There is a really small tune needed on the knobs to make them more usable because they are very sensitive. Thanks! That is definitely on the list for a future update! Cheers, Jan 1
Cameron Posted May 24, 2020 Author Report Posted May 24, 2020 I have reinstalled again with the X-Plane 11 checked stable version used. This is the version that shows in the files. Jeffg That has nothing to do with Gizmo.
mizra108 Posted May 24, 2020 Report Posted May 24, 2020 Hi Jan,I'm fascinated with the update and enjoying my fav aircraft in XP11. I wanted to point out a few things which seem like bugs but perhaps you can explain better: 1. I thing the mechanic forgot to put the upper R screw on the Pilot's ND (see attached image) 2. The N1 reference bugs do not coincide with that shown on the FMC N1 LIMIT page, but instead, it goes into the yellow arc by itself. Is this a bug? (see attached image) 3. While flying, the IDG oil temp indicators on the overhead panel do not show any temperature nor temp rise and needles are deflected completely as if the engines were off. Is this normal behavior (see attached image) Otherwise, amazing job to you and the team and thank you for the long awaited update! Mark
silverchord Posted May 24, 2020 Report Posted May 24, 2020 1 hour ago, Cameron said: http://forums.x-pilot.com/forums/topic/17926-failed-update/?do=findComment&comment=150126 I trying this, but same result, same error message...
gigabenga Posted May 24, 2020 Report Posted May 24, 2020 (edited) Dear Developer Update 1.3 thanks for all BUT Why did you forget the HOLDING function in the FMC. This is a serious point of absence. Furthermore, if you leaf through the Progress page, it will be a disaster. After such a long time for development. Why do you forget something like that? The holding function is the most important thing in an FMC. And the other one Why not implement open close Doors for Passenger? greetings. Edited May 24, 2020 by gigabenga
Recommended Posts