Goran_M

The problem persists?? Can you check and make sure all X-Plane default systems, under "failures" are set to "Always working"?

ok, that's very strange. I've never come across an issue like this before. Try something. Go to your X-Plane/Output/TBM/state folder, and remove all files in that folder. (Put them somewhere safe. Don't delete them yet.) Reload X-Plane, and check the oxygen. Post back results.

It depends. Damage can occur when even loading the TBM on a scenery that forces the aircraft to "drop" due to incorrect or more accurate terrain data. Also, not saying this is the cause, but make sure "accelerated wear" is turned off.

Not refillable anymore. It's worn out. Needs to be replaced.

Traffic might be another issue. If it happens again, try it without traffic. I think there's a setting in your traffic plugin where you can disable visual traffic, but still get TCAS traffic.

Can you post a screenshot of the Oxygen section of the maintenance manager.

You have quite a lot of plugins running, and some are very likely not compatible (Marginals ground traffic being one of them). I'll need you to try from the bottom to figure out which one is causing the problem. But before you do that, if you are running in full screen mode, change to windowed mode and see if the crashes stop. This is something on AMD's end, and not something we can fix. If this doesn't work, proceed with the next steps. Can you install a second copy of X-Plane, with no scenery, and just the TBM. This will very likely work without issue. Then start adding plugins one at a time until a crash happens. Report back when the crash happens and we can take it from there.

It may be a memory issue, but in all likelihood, it is not caused by the TBM. The reason I know this, is because I also run X-Plane on a MacBook Pro, and I don't have this kind of crash. Could you post a log.txt that is generated after the crash.

https://discord.gg/xtmesQYz

Do you have any other add ons with pop out windows? Also, what happens if you try OpenGL?

I'm not really sure what you mean by "can you suggest the settings..."

The VACUUM LOW CAS gets triggered when sim/cockpit/misc/vacuum is less than 6.

I was going to reply with the question, "Are you using an AMD GPU, and then saw the last part of the post. Laminar have been trying to get AMD to fix a few graphics issues. Let me ask, are you also running in Metal/Vulkan?

This has been fixed in the last update.

Could you post your TBM900log.txt file. That'll tell me more about the panel state of the aircraft. Maybe something in there will tell me about something staying on.

I meant did you have any external hardware hooked up to the sim, with a rogue switch assigned to some kind of power dataref that is keeping it on? We've seen this happen before.

You have a lot going on by way of plugins and scenery, and my first guess would be you are getting crashes with corrupted scenery and the TBM trying to read corrupted terrain data. Do these crashes happen in any other areas? If not, can you try doing the same flights with the custom scenery removed, to test what would happen? To really eliminate the possibility of the TBM being the cause, could you try installing a clean copy of X-Plane, with no scenery and no plugins, and just the TBM, and then checking for crashes? If no crashes happen, try installing the scenery and plugins 1 or 2 at a time, and re-test.

Do you have any hardware that may be drawing power from the battery, that you are unaware of?

I wouldn't consider it a "bad move", per se. We just wanted to create something different and more advanced, that we had access to.

To not make it?

https://discord.gg/Wfb8dYEB

This is a common problem we're seeing with AMD GPU's and running X-Plane in full screen. This is not something we can fix with code, nor is it something Laminar can fix with X-Plane. This is something AMD needs to address. The workaround is to run X-Plane in Windowed mode (the better solution for now), or if you insist on running X-Plane in full screen mode, have a window open in the background. It can be an explorer window or your browser, but a window needs to be open while X-Plane is running in full screen mode. This works most of the time, but it has unpredictable results. Try either or both of these options, and post back results. Hopefully, this is something AMD addresses some time soon.

I'm guessing you are running X-Plane in full screen (not windowed) mode. Am I correct?

This is the command for the cockpit manipulator. It should work. tbm900/actuators/cb/light

I couldn't tell you the issue with your hardware. We have quite a few people using the TBM with the Logitech Extreme stick, and they have no problems. One of our testers has that exact hardware. The only thing I can suggest is that you make sure everything is calibrated correctly and all axis assigned.