Cameron Posted October 26, 2018 Report Share Posted October 26, 2018 Hello All, This will serve as a formal forum announcement that we have released the version 1.0.7 update for the TBM 900. All customers who have purchased the TBM 900 up till now have been sent an e-mail by X-Aviation with complete instructions on how to obtain your update. We have made this a very simple process! For those that purchase the TBM 900 from today forward, your purchased download will already be updated to version 1.0.7 for you. VR is now integrated. See a video here! What if I didn't get the update e-mail? If you did not receive your update e-mail don't fret! X-Aviation has updated our system to allow all customers to update with ease, regardless of whether you received an e-mail for the update! Here's what to do: 1. Login to your X-Aviation account here: https://www.x-aviation.com/catalog/account_history.php 2. Find your original TBM 900 download and re-download the file. It will download as the latest version! The following is a list of additions/fixes included: What's New / Changed: Massive VR usability enhancements courtesy of SimVRlabs. Yoke & throttle now directly VR operatable. Also changed a ton of click spots into VR-friendly ones. VR walkaround. Just teleport around the aircraft and remove engine covers, toggle GPU/chocks, pitot covers, static wick covers and static port covers. Added prop governor damage warning when selecting reverse with engine shut down. "Aircraft not activated" regression now finally fixed. Oil was wearing out way too quickly. Retuned to expected real-world performance. Added missing "brakes hold regular effort" that got lost in the brake pedal refactoring process. Fixed crash due to zero-length runway confusing synthetic vision code. As always, thanks for being a customer with X-Aviation. We appreciate your feedback and support! Enjoy these latest updates, and stay tuned to the forum as we continually announce the latest happenings. 2 1 Link to comment Share on other sites More sharing options...
Shane Pinheiro Posted October 26, 2018 Report Share Posted October 26, 2018 (edited) Amazing work with the pushing out of the updates! Thanks! Is it possible to get the walkaround without VR? Edited October 26, 2018 by Shane Pinheiro Link to comment Share on other sites More sharing options...
pcartier1960 Posted October 26, 2018 Report Share Posted October 26, 2018 You guys are amazing! I removed all my GA aircraft except this one! it's hard to go back to the others after flying this aircraft. 1 Link to comment Share on other sites More sharing options...
siege00 Posted October 26, 2018 Report Share Posted October 26, 2018 Thank you Totoritko, Goran, and Cameron for this product (as well as any other people involved in bringing this to market). Seriously top notch work! Superior quality, performance, and support. Amazing! 2 1 Link to comment Share on other sites More sharing options...
sabreman Posted October 26, 2018 Report Share Posted October 26, 2018 Man you all are absolutely insane try not to burn yourselves out in this crunch! Yeah there are bugs to fix, but if you actually hurt yourselfs there wont be anymore people to fix bugs. Try to take a day off! 1 1 Link to comment Share on other sites More sharing options...
prattpt6 Posted October 26, 2018 Report Share Posted October 26, 2018 A true beauty! 3 Link to comment Share on other sites More sharing options...
SchwabeVR Posted October 26, 2018 Report Share Posted October 26, 2018 what a great VR support. Since I'm only in VR X-PLANE, I'm really looking forward to this plane. i think it's also the first one where you can make such a walkaround. you do a great job ;-) the plane is bought Link to comment Share on other sites More sharing options...
gcbraun Posted October 26, 2018 Report Share Posted October 26, 2018 Hello, are the windshield effects in VR fixed with this update? Thanks Link to comment Share on other sites More sharing options...
Francois_ Posted October 26, 2018 Report Share Posted October 26, 2018 Guys, I am already in bed but after reading the release notes I am heading back to my study to try out the new updates! Please enjoy your weekend, and get some sleep! 1 Link to comment Share on other sites More sharing options...
falcon1823 Posted October 26, 2018 Report Share Posted October 26, 2018 3 hours ago, Shane Pinheiro said: Amazing work with the pushing out of the updates! Thanks! Is it possible to get the walkaround without VR? Yes, what you can click with the VR controllers you can also mouse-click outside of VR Link to comment Share on other sites More sharing options...
gmargodt Posted October 26, 2018 Report Share Posted October 26, 2018 Fantastic work guys ! You rock ! Link to comment Share on other sites More sharing options...
manguras Posted October 26, 2018 Report Share Posted October 26, 2018 For the first time I had engine shutdown in flight during climbing... v1.0.7 Link to comment Share on other sites More sharing options...
Goran_M Posted October 26, 2018 Report Share Posted October 26, 2018 37 minutes ago, manguras said: For the first time I had engine shutdown in flight during climbing... v1.0.7 If you think this is a bug, can you please post a Log.txt file. Before you do, can you confirm you didn't over torque the engine? Link to comment Share on other sites More sharing options...
manguras Posted October 26, 2018 Report Share Posted October 26, 2018 I had operate torque in normal range... even if I had over torque the engine don t shutdown via the condition, thrust lever!! I did restart the engine and continue flying. I will observe if happen again I will send the Log.txt file Link to comment Share on other sites More sharing options...
Skyguider Posted October 26, 2018 Report Share Posted October 26, 2018 It happened to me only once after 40min of flight during descend. No CAS message TRQ respected no yellow warnings no smoke no fire it just cut off. Fuel selector was working correctly and there was enough fuel. It never happened again so I thing that there was a pilot error but I don't know if it's possible to get engine cut off in air without any CAS message. If the issue come back, I'll immediately will copy the log file. Link to comment Share on other sites More sharing options...
Floater Posted October 26, 2018 Report Share Posted October 26, 2018 (edited) I've never seen such a rate of updates. You guys are amazing! As the others said: calm down and have a nice weekend/a few days off Edited October 26, 2018 by Floater Link to comment Share on other sites More sharing options...
Goran_M Posted October 26, 2018 Report Share Posted October 26, 2018 (edited) 1 hour ago, manguras said: I had operate torque in normal range... even if I had over torque the engine don t shutdown via the condition, thrust lever!! I did restart the engine and continue flying. I will observe if happen again I will send the Log.txt file 40 minutes ago, Skyguider said: It happened to me only once after 40min of flight during descend. No CAS message TRQ respected no yellow warnings no smoke no fire it just cut off. Fuel selector was working correctly and there was enough fuel. It never happened again so I thing that there was a pilot error but I don't know if it's possible to get engine cut off in air without any CAS message. If the issue come back, I'll immediately will copy the log file. Matt Davies once did a stream where the engine cut out. In his example, he caused the aircraft to climb sharply and then drop. When this happens, the fuel doesn't get fed through the fuel lines, and the engine will cut out, until fuel flow is restored and you restart the engine again. I'm guessing this might have happened in your case. Could you please confirm? 32 minutes ago, Floater said: I've never seen such a rate of updates. You guys are amazing! As the others said: calm down and have a nice weekend/a few days off We're all workaholics. Edited October 26, 2018 by Goran_M 2 Link to comment Share on other sites More sharing options...
Skyguider Posted October 26, 2018 Report Share Posted October 26, 2018 2 minutes ago, Goran_M said: Matt Davies once did a stream where the engine cut out. In his example, he caused the aircraft to climb sharply and then drop. When this happens, the fuel doesn't get fed through the fuel lines, and the engine will cut out, until fuel flow is restored and you restart the engine again. I'm guessing this might have happened in your case. Could you please confirm? We're all workaholics. Thanks Goran, I din't think about that because from straight flight I start descend by -1600 ft/min but now I remember that the weather suddenly changed and the acft did a violent movement when the XP loaded the new area's weather. The reason why the weather changed like this is because I switched OFF xEnviro and switch to NOAA weater to see differences in performance. Maybe this was the reason that the engine cut out. Nice find Goran. Link to comment Share on other sites More sharing options...
Goran_M Posted October 26, 2018 Report Share Posted October 26, 2018 I'd say that is definitely it, in your case. Link to comment Share on other sites More sharing options...
cmbaviator Posted October 26, 2018 Report Share Posted October 26, 2018 42 minutes ago, Goran_M said: When this happens, the fuel doesn't get fed through the fuel lines, and the engine will cut out, until fuel flow is restored and you restart the engine again. I'm guessing this might have happened in your case. Could you please confirm? We're all workaholics. Ahh, so we are to this level of simulation, Link to comment Share on other sites More sharing options...
Goran_M Posted October 26, 2018 Report Share Posted October 26, 2018 Of course. 1 Link to comment Share on other sites More sharing options...
kalleffm Posted October 26, 2018 Report Share Posted October 26, 2018 a short trip from EDSB to EGLC and back with V1.07. works very good by now only the G1000 is to bright, but doesnt keep me of flying this beauty picture: nearly centerline with crosswinds from the right - main gear first and keep the nosewheel up Link to comment Share on other sites More sharing options...
marpilot Posted October 26, 2018 Report Share Posted October 26, 2018 (edited) After update: unable to set HIGH-IDLE , the handle (which is now arrows) moves from LOW-IDLE to FLIGHT-IDLE omitting HIGH-IDLE. It was not like that before. A bug? Edited October 26, 2018 by marpilot Link to comment Share on other sites More sharing options...
marpilot Posted October 26, 2018 Report Share Posted October 26, 2018 Disregard. I must click shorter not holding the button to move only one step. But it is different than before. Link to comment Share on other sites More sharing options...
jelder Posted October 26, 2018 Report Share Posted October 26, 2018 Any issues with new 11.30b1? 1 Link to comment Share on other sites More sharing options...
Recommended Posts