Plugins and Utilities
83 files
-
Xsaitekpanels Configuration for HotStart TBM900
By lanmancz
*** XSaitekPanels map for HotStart TBM900 for:
- Multipanel
- Radiopanel
- Switchpanel
*** Requirements:
- XSaitekPanels - v2.75+
https://forums.x-plane.org/index.php?/files/file/14646-xsaitekpanels-linwinmac3264/
- FlyWithLUA for XP11
https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
*** Installation:
Remove any existing TBM900 XSaitekPanels mappings.
Copy "xsaitekpanels.ini" into TBM900 root folder. (ex. "[X-Plane]\Aircraft\X-Aviation\TBM-900\")
Copy "acexsp_TBM900.lua" into FlyWithLUA Scripts folder. (ex. "[X-Plane]\Resources\plugins\FlyWithLua\Scripts\")
*** Tested with TBM900 v1.08
*** Mapping:
Multipanel:
- ALT - Altitude dial
- VS - Vertical speed
- IAS - Speed dial
- HDG - Heading dial
- CRS - Captain's course dial
- AT - Nothing
- TRIM - MCP wheel
- FLAPS - Flaps
Autopilot:
- AP - AP (YD)
- HDG - HDG
- NAV - NAV
- IAS - FLC (SPD)
- ALT - ALT
- VS - VS
- APR - APR
- REV - VNAV
Radiopanel:
- All standard default mapping.
Switchpanel:
- STARTER - AUX BP
- BAT - Battery
- ALT - Generator
- AVIONICS - AP Trims
- FUEL - Fuel Sel
- DE-ICE - Airframe de-ice
- PITOT - Pitot & Static
- COWL - Inertial separator
- PANEL - Dimmer
- BEACON - Pulse
- NAV - Nav
- STROBE - Strobe
- TAXI - Taxi
- LANDING - Landing
*** Known issues & limitations:
- None. All should work fine.
99 downloads
- hotstart
- xsaitekpanels
- (and 1 more)
Updated
-
TBM-900 Xchecklist configuration
By haeriphos
This is my Xchecklist configuration file for the Hot Start TBM-900. It follows the quick start guide pretty closely with a couple of additions, such as a reminder to start and stop ACARS software.
99 downloads
Submitted
-
MODERN INTERFACE for X-plane 10
By Wakey0
Time to give X-Plane a new modern look!
This is made to give a different and new look for X-Plane and changes it from the old one.
Not everything has been changed, but most visible items.
*INSTALLATION* Please make backup copy!! This is in case you want to go back to the original.
Copy 'Interface.png' from the Zip file into X-Plane 10\Resources\bitmaps and replace.
Done!
Enjoy.
89 downloads
Submitted
-
HotStart Challenger 650 Popout Panel combinations
By Tebro
This is a simple plugin for the HotStart Challenger 650 that allows the user to define combinations of popout panels. These combinations can then be bound to a button as a command.
Read the README.md file in the package Documentation. The most important note is that this is installed into the Aircraft plugins! Not global X-Plane plugins.
88 downloads
Updated
-
JD Ground Handling Deluxe Set for LES Saab 340
By aeysim
ATTENTION: Only for LES Saab 340!
1. Download file
2. Insert folder "Saab340APublish.set" into X Plane 11/Resources / plugins / GndHandling / Sets / Custom
4. Enjoy!
JARDesign Ground Handling Deluxe: https://store.x-plane.org/Ground-Handling-Deluxe_p_415.html
LES SAAB 340A: https://www.x-aviation.com/catalog/product_info.php/take-command-saab-340a-p-100
78 downloads
Submitted
-
QNaid for IXEG 737, sets or helps with altimeter settings at transition altitude
By TonyVier
This little script helps setting your (captains) altimeter for the IXEG 737 Classic.
Please note, the transition altitude is read from the actual value you have set on the CDU/FMC
First, it can sync your altimeter with the current weather info from the simulator.
To use this feature (or not) set "SyncQNH_WithWeather" to true or false in IXEG_QNaid.lua
Second, it can note you of passsing the transition altitude during climb, or set the standard altimeter setting for you.
Set "SetStandardOnClimb" to true if you want it done for you or false if you just want a notification.
Third, it can note you of passing the transition altitude during descent, or set the QNH altimeter setting for you.
Set "SetQNH_OnDescent" to true if you want it done for you or false if you just want a notification.
65 downloads
Updated
-
Checklist for Embraer 190 by Supercritical Simulation Group
Checklist for Embraer E190 by Supercritical Simulation Group.
The checklist was developed from a range of documentation with helpful prompts added.
Works with XChecklist by Sparker
Place the clist.txt file in your SSGE-190LRV1 XP10 folder (Same as the .acf file). Done!
59 downloads
Updated
-
Paintkit with layered PSD files for the McPhatstudios ATR 72-500
Layered Paintkit for McPhatstudios ATR72-500 by Leen de Jager
By Leen "Flybike" de Jager.( based on edited and composed blanks made from the original McPhattextures )
This paintkit includes a set of "neutral-normal-files".
Make sure to place these normal-files in the objects -folder of your livery.
These normal-files have an edited normal and /or specular layer.
Their individual file-weight is much lower than the original ones , approx 7Mb instead of 16Mb
Using these normals prevents the default normal-files from making the default texture
visible on your paint when sunlight is striking the texture .
These customised normals (V2) replace the set I made and published earlier.
This paintkit is free ( for non-commercial use ONLY).
When publishing a repaint based on this paintkit, credits :
Paint made using ATR paintkit by Leen "Flybike" de Jager
Unzip LDJ-Paint-kit ATR72-500-V2.zip to a temp folder.
Have fun
Leen "Flybike" de Jager
http://www.flybike-paints.nl
58 downloads
Updated
-
Window CDU for IXEG 737-300
By TonyVier
This script duplicates the Captains CDU in a Window.
To activate the Window CDU, move your mouse to the far right on your monitor, and press the button.
Al normal functions should be available, except the CDU keyboard.
If you check "<Use Keyboard for CDU Input" on the Window CDU however, you can use your computer keyboard to enter data. The backspace key functions as a CLR key.
PLEASE NOTE: if "<Use Keyboard for CDU Input" is checked, ALL keyboard input is directed to the CDU, and you can't give normal key commands to the simulator. So, you can't change views, lower the gear by pressing g, etc. The ESC key releases CDU keyboard capture as well as unchecking the option.
Current limitations; Inverse colored data from the CDU is displayed normally, MSG, FAIL and OFST are not duplicated, but only shown on the normal CDU.
In theory the Window CDU should work in VR. You can drag the Window CDU to another monitor.
PLEASE LET ME KNOW, if there is anything going wrong.
Plugin needed:
FlywithLua NG: https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/
56 downloads
Updated
-
XTouchDownRecorder (Win/Mac/Lin)
By cpuwolf
XTouchDownRecorder
X-Plane 10/11 aircraft landing touch down flight recorder
it is used for aircraft landing data analysis
it supports Windows, Mac, Linux x64 only
feature
landing fpm, pitch, G force touch ground times max fpm,pitch, G force around landing landing log will be automatically written to log file TouchDownRecorderLog.txt automatically pop up after landing button/key assignment XTouchDownRecorder Community XTouchDownRecorder Community
click here open a new world
Installation
Unzip and move folder XTouchDownRecorder to X-Plane 11\Resources\plugins\ Start X-Plane Check X-Plane Plugin menu, there will be a XTouchDownRecorder Joystick button/key assignment
assign button/key to cpuwolf/XTouchDownRecorder/Toggle TouchDownRecorder Chart
X-Plane 11 user
X-Plane 10 user
Screenshot
X-Plane 11
X-Plane 10
Data Analysis
Contact Me
https://www.paypal.me/cpuwolf
https://www.patreon.com/cpuwolf
https://x-plane.vip/xtdr/
QQ群：378072629
52 downloads
Updated
-
KILM Flight and Ground Routes
By Vance
Air and ground traffic are available for KILM (Wilmington Intl, payware). World Traffic aircraft and start locations are:
- KC-10 near gate 7
- F-14 near hanger behind control tower
- Columbia near Air Wilmington
- C-130 near Customs tarmac
A few things to keep in mind. KILM has crossing runways and sometimes World Traffic will place two aircraft on the same taxiway for a head-on collision. The KC-10 is rather large so any aircraft of similar size at gate 5 or 8 will need to taxi before the KC-10 has room to maneuver. The Columbia is hard to see when zoomed out from the airport because the light-colored wings match some taxiway colors. Use the optional object file for red wings on the Columbia. Flight plans begin in the air (not a departure airport) and all KILM runways have been defined; so landing should be possible for any wind condition.
49 downloads
Submitted
-
A lateral cargo door (FlyJSim B732 Twinjet)
By XPJavelin
This download is a lateral cargo door for the main deck of the FJS 737-200 Twinjet.
"This is not an official FlyJSim object, modification of the acf file comes at your own risk."
This object has to be added as supplementary 3D object in Plane Maker.
Please open Plane Maker and browse to FlyJSim 737-200 acf file.
Select Misc 3D objects and browse to our file. Add it.
Save it.
To display the door in the open state, please set 0001 as transponder code.
This download is fully independant from FlyJSim art assets. Therefore, as we couldn't touch to the actual fuselage, we mimic the hole in the fuselage with a mask.
This should work well with my Combi repaint where I painted the door on the fuselage.
49 downloads
Submitted
-
Updated
-
finnair Finnair: FlightFactor A350 Announcement sound pack
By PyroLife
Finnair: announcement V1.0.0
Instructions:
1.Unzip the .7z / .zip file
2. Remove the (1),(2),(1A),(B)... from the filename.
3. Go to the X-plane root
4. Replace the audio files in the Costumer Avionics folder: (/Xplane/airplanes/(name of ff350 folder)/sounds/PA)
Note:
These files are tested on the FF A350 airbus aircraft.
i can not confirm if the sound package also can be used for other aircraft.
I hope i could help you for a wonderful flying experience with Finnair on Xplane!
Downloads:
- Please share ur experience. I would love to improve! -
40 downloads
Updated
-
thai airways Thai Airways: JAR-Design Announcement sound pack
By PyroLife
Thai Airways: cabin announcement.
V1.0.0: Safety demonstration video
Note:
These files are made for the Airbus of JAR Design.
i can not confirm if the sound package also can be used for other aircraft.
To open .7z file: go to 7-zip.org and download the lasttest version
- Please share ur experience,I would love to improve! -
38 downloads
- sounds
- sound pack
- (and 3 more)
Updated
-
Updated
-
BN-2B More Commands
By Ch.Cole
This flywithlua script adds nine commands which can be found under FlyWithLua/BN2P
Installation: Drop the lua into your script folder.
Four for the cockpit lights (Off, Full, decrease, increase), the speed to increase and decrease can be adjusted in the file.
Five for the Ammeter knob (Left Gen, Bat, Right Gen, rotate clockwise, rotate counterclockwise).
30 downloads
Updated
-
LES Saab 340A VR Touch Controllers Mod
By falcon1823
This is a mod to fix a lot of manipulators that are otherwise unusable in VR with the touch controllers in the Leading Edge Simulations Saab 340A Version 1.5 for XP11. Manipulators that have been tweaked to work in VR are:
Tweak Log:
Rudimentary Pilot and Copilot teleport hotspots! (WIP)
GPS Knobs, inner/outer
Sun Shades, slide on rail and lower/raise
All Light Intensity Rheostats
Autopilot Altitude Selector Dial
Com 1 and 2 Function Selector and Frequency knobs, inner and outer
Nav 1 and 2 Function Selector and Frequency knobs, inner and outer
ADF 2 and 2 Function Selector and Frequency knobs, inner and outer
Transponder Function Selector and Frequency knobs
CRS 1 dial
CRS 2 dial
HDG dial
OBS Knobs
IAS Bug knobs
Altimeter baro pressure knobs
Overhead DC Selector knob
Flight Number Digit Wheels have been tuned for functionality
Parking Brake orientation corrected (was previously reversed, now a push toward the floor pushes the knob down)
Steering Tiller orientation corrected (was previously reversed, now a push toward the floor pushes the knob down)
DCP Select knob tweaked
Decision Height Knob rotation and push in/out tweaked (was previously reversed)
And many, many other dials, knobs, and switches...
These changes make the aircraft fully flyable using touch controllers in VR! With the exception the yoke.
Known bugs or issues:
- Some manipulators are a bit fiddly/touchy/sensitive, but at least they work correctly. **most fixed in 1.1
- CRS 1 knob seems to have two grab points, and one doesn't work. If you grab the CRS 1 and it doesn't turn, aim more for the base of the knob instead of the top of the knob. You can also grab the obs knob next to the CRT screen, it works beautifully.
- Switches that should "snap" back to center, such as starter switch, bleeds, trims, V/S wheel, etc...they do not snap back to center using the VR controllers. I believe there is some custom "onmouserelease" gizmo code going on there, and the VR controllers aren't seen by gizmo as a "mouse". Fortunately the VR mouse works just fine, so I map the vr mouse to a button on my yoke and turn it on when I need to adjust trims. Everything else is still usable with the VR controllers. When you reset the bleeds it will stay in the reset position, but I've found that it's fine to leave it there. Same thing with the starter switch, it will just stay in the position of the engine you just started, but doesn't make a difference. If you want to snap it back to center, just use the VR mouse for now. I also map the vvi up and vvi down to buttons on my yoke so i don't have to use the V/S wheel when climbing/ascending using V/S mode.
- Some custom mouse wheel code in 2d gets broken while using the VR mod, so if you are going to fly her in 2d you may want to revert back to the old .obj files.
- gust lock only works using VR mouse. Again, I believe it's dependent on some custom gizmo mouse code.
Disclaimer: This is not an officially supported LES update, so don't expect support from them on it. If you need help you can always ask me or just put your old .obj files back in your folders. If you lose the old files and just want to reset everything just reinstall the aircraft.
Installation Instructions:
Download the SaabVR-obj-v22.zip file (this is the latest version)
Back up your LES_Saab_340_cockpit.obj from your Passenger Variant folder, your LES_Saab_340a_Cargo_cockpit.obj from your Cargo Variant folder, and your LES_Saab_340a_AEW_cockpit.obj from your Airborne Variant folder.
Unzip the file, you'll find 3 folders, one for each Saab variant (passenger, cargo, airborne). Inside each folder you'll find a ***variant.txt file and a ***vrconfig file.
Step 1: The ***vrconfig files just go in your Saab's corresponding aircraft variant folders. Easy.
Step 2. You will need a text editor for this next part, I recommend notepad++ (free). The text inside these ***variant.txt files are intended to replace the current corresponding text in the obj files. Open the ***variant.txt file and copy all the text. Open the matching .obj file from you Saab's variant folder in your text editor. Search/find (or edit/find) for the world "TRIS". Highlight that line and all remaining text in the obj (shift click at the bottom of the file to do this quickly) and paste. Save the obj. (Not save-as, don't give it another name).
Enjoy!
**What's New in Version 2**
This is a fairly major update. Along with the obj text modifications you'll now get vr_config.txt files to put in your aircraft variant folders as well.
Changed a lot of axis manipulated knobs to their correct manipulation, getting rid of the "sliding up and down the colored line" effect. Also changed the sensitivity of countless dials and switches for a much better experience. Also added teleport hotspots to the pilot and copilot seat (sort of...it's a work in progress, but it works. The blue hotspot indicator that you're probably used to is currently a hoop about where the head of the pilot would be, but it works).
All the manipulators that are still bound to color-line axis's can not be fixed because they are custom-code dependent (I think), and I've not found a way to fix them. They work as is, just have to deal with the axis slide.
27 downloads
Updated
-
JD Ground Handling Deluxe set and JD Ground Handling Deluxe livery for TorqueSim BN-2 Islander/BN-2T Turbine Islander
By aeysim
1. Download and extract both files
2. Insert folder "BN'.set" into X Plane 11/Resources/plugins / GndHandling / Sets / Custom
3. Extract RedDevils.rar. Put RedDevils file into X-Plane 11 / Resources / plugins / GndHandling / Liveries
4. Enjoy!
* IMPORTANT:
Do not enable BN2 Islander's/BN-2T Turbine Islander's original chocks to use BN2P.set.
Or delete lines 1411 to 1523 from the BN2P.set file.
Ground Handling Deluxe: http://handling.jardesign.org/
Ground Handling Deluxe buy: https://store.x-plane.org/Ground-Handling-Deluxe_p_415.html
TorqueSim BN-2T Turbine Islander Red Devils (fictional) Livery:
24 downloads
- jd grandhanding
- torquesim
- (and 1 more)
Updated
-
saab340a Make it easy to follow takeoff and landing speeds
By aeysim
ATTENTION: Only for LES Saab 340!
It makes it easy for you to follow takeoff and landing speeds.
Takeoff speed (approximately) : 105 knts (green)
Landing speed (approximately) : 115 knts (red)
1. Download and extract file
2. Insert folder "Cockpit.png" and "Cockpit_LIT.png" in Aircraft/X-Aviation/Saab 340A/.............. Variant/liveries/.........../objects
Apply this process to all variants and liveries.
4. Enjoy!
P.S: An explanation came from LES: CTOT is not based on 64% torque, it is based on 64˚ Power Lever position.
So I re-edited the file and unchecked the Torque indicator showing 64%. I arranged the picture again according to what is written here. However, they need to fix the error in the Flight Tutorial.pdf file (p.11) found in the aircraft manuals.
I reuploaded the corrected image file. Sorry.
LES SAAB 340A: https://www.x-aviation.com/catalog/product_info.php/take-command-saab-340a-p-100
23 downloads
Updated
-
AutoFoV
By daemotron
About AutoFoV
AutoFoV is a plugin for the X-Plane flight simulator, automatically setting the field of view based on the currently loaded aircraft. AutoFoV is open source; you can find its source code and more detailed instructions at its public GitHub repository.
Installing AutoFoV
AutoFoV comes in X-Plane's fat plugin format. Simply extract the directory AutoFoV from the zip file and place it as a sub-folder into the Resources/plugins folder of your X-Plane installation.
Using AutoFoV
AutoFoV allows to define a custom field of view for each aircraft model (i.e. for each .acf file in your X-Plane's aircraft folder and its subfolders). To define a custom field of view, simply create an empty file in the same folder and with the same name as the .acf file, but suffixed with .fov instead of .acf, and populate it with the numeric FoV value you want to use with this aircraft (only digits 0-9 and the decimal dot are allowed).
23 downloads
Submitted
-
Non precisions and APV approaches : what really is this minimum on the chart ?
By XPJavelin
In this paper, I conduct a review of DA, and MDA regarding non precision approaches flown with the CDFA method, or regarding RNP approaches with vertical guidance. How are they charted on the different kinds of charts ?
21 downloads
Submitted
-
Start flying.py
Start flying.py is a simple program launcher that is somewhat more powerful than creating a batch file.
If you launch other addons to run with your flight simulator this utility is for you. Set it up once and then you'll launch your Flight Simulator and addons with a single click.
21 downloads
Submitted
-
XMidiCtrl - Aircraft Profile for SIAI-Marchetti SF-260
By VirtualCPT
Aircraft Profile for the XMidiCtrl plugin
Aircraft:
SIAI-Marchetti SF-260
MIDI-Device:
Behringer X-Touch Mini
20 downloads
Submitted
-
XMidiCtrl - Aircraft Profile for the Mitsubishi MU-2
By VirtualCPT
Aircraft Profile for the XMidiCtrl plugin
Aircraft:
Mitsubishi MU-2
MIDI-Device:
Behringer X-Touch Mini
18 downloads
Submitted