Leaderboard

Boeing 737-300 American Airlines it really is a beautiful aircraft I remember flying from DR to curacao, (dont ask what airline it was, cause i was a kid, been too long. all i remember was the plane) ,monthly from santo domingo to curacao with my grandparents alot, this was back in the 90s, it was either, and a 727 and or a 737-200, always those 3 aircrafts

Not going to do that, but suffice to say this is all just conjecture and speculation by all of us. ...its just 'conversation', not much more that that. None of us know what will happen, but we all have our thoughts. I myself think XPlane is not in any danger of dying any time soon...just my opinion -tkyler

Good catch! That bug is logged.

It's modeled and will be in the next update.

The custom engine page is a feature of the DA40NG with NXI avionics. The custom 3-pane engine sidebar as on non-NXI NGs is modeled. I've got the note on the background color markings logged. The power level responsiveness is something we are looking into.

Thanks, this is logged.

Roger that, @VirtualGAaviator My wife is the real world also, but she likes to play along in the virtual world. We all ways talk about new pilots or what planes needs work and to get ready to fly. Just a fun thing to do.

My wife, in the virtual world, is a perfect 10 who hardly ages. She's my best friend, lifts me when I'm down and when I'm happy, she adds to that happiness. She lets me win all arguments, loves my extended family, and don't mind if I spend more time simming than talking with her. Most of all, she loves me with all her heart. But, I'm in the real world. @Rick310 Watch out for those cumulonimbus clouds on your way back. Either go around them or land and wait them out.

I am an ignorant guy who has been on xp since version 9. I've been hearing that xp is dying since I started in this of the simulation, I suppose that years will pass and we will continue with the same song while I will continue to enjoy the little that leaves me the life of this magnificent software product that is XP.

We are very close...

After a long day of flying today. About 5 and a half hours of flying time, I have finally out of Alaska and in BC Canada. Will be landing at Port Hardy CYZT.

Warning - rant coming. Abandoning CL650 - too many CTDs and other issues. Just really tired of spending hours setting up flights only to CTD at some point. Yes - pulled plugins, yes reverted NVIDIA driver, yes updated NVIDIA driver, yes posted on Discord, yet posted on X-Pilot, yes pulled custom scenery etc, no - nothing in XP log, no - nothing in Windows Event Viewer etc. This is a very expensive aircraft, and very well modeled, extremely realistic blah blah. Yes to all that - and bottom line - its not any fun with this ever-present issue. Spending way too much time troubleshooting. Really disappointing and frustrating. And given that this was about the only aircraft I was using on a regular basis in XP - probably done with XP too. Back to MSFS which has it's issues as well - but not like this. OK - done with rant. Feel much better.....

Yes, I know about that. Have not used any other plane since my first Challenger flight.

Every operation will be somewhat different of course.... Once we complete the last leg of the day and the shutdown check is complete, one of us is immediately getting up out of the seat to open the cabin door and go verify chocks are in place, the nose doors are opened, and 5 pins are inserted. Of course if our last leg is a passenger leg - they are disembarked first. One pilot typically stays with them for the walk to the vehicles or the FBO - while the other pilot heads to the interior of the baggage compartment to pass the bags to line crew. That pilot then comes through the cabin to check for forgotten personal items - concluding with a thumbs up to the pilot adjacent the vehicles. If they walked inside - typically a text is sent between pilots that the cabin is clear (or isn't). At this point the pilot with the airplane will coordinate with the line crew re: required services - verifying chocks are in place - then retrieving the pins and inserting them. Different operations have different philosophies/standards regarding nose doors opened or closed. At our home base - we will always open the doors and insert 5 pins. Away from home while on the road we can exercise discretion to leave them closed. In a location with security concerns, or if there are any concerns regarding tugs, line crew, etc - we may elect to go with 3 pins and leave the doors closed. I'd say in our operation the doors are left open with 5 pins the majority of the time. Under no circumstance will we leave the nose doors open without inserting the 2 additional pins. Once pins are inserted and we're both back on the jet - it's time to start cleaning up and preparing for the next flight. Garbage is gathered, old coffee is dumped, drinks in the drawer with paper labels are removed from the ice bins - leftover catering is emptied from the chiller and either given to line crew as trash, as a gift, or to be stored in the FBO fridge. If the cabin needs to be vacuumed - we vacuum while power is still on. Tables and surfaces are cleaned at this point, seatbelts are cleaned and put back into presentation , the sinks and lav are cleaned and while this is happening - line crew is probably performing the lav service. Dishes and linens are given to line service as well. We like to keep power on until all of that is finished so we can check the lav - that enough (hopefully clean) water has been put back in and its back to smelling/looking fresh. We also have to restock from the storage drawers in back. Things like snacks, drinks, chips etc - all have to be replenished. If 15 minutes has gone by - one pilot is checking/servicing the oils in the utility bay. If temps will dip towards or below freezing - we purge the potable water system. This is often done at TOD depending on circumstances to avoid dumping 10 gallons of potable water on an FBO ramp which will turn into an iceberg. Water lines must be purged on the ground which is similar to prepping a recreational vehicle or boat for winter storage , minus the antifreeze, although there's different techniques there too. Sometimes during all of this we may also fuel for the next day's flight - circumstances of course dictate when we would do this as there are considerations to keep in mind leaving the jet with a lot of fuel. We also will consolidate crew baggage and put it in the baggage door opening in preps for offloading. We ensure the garbage, catering, fridge items, etc - are indeed all off. The parking brake at this point has probably long been released since chocks were verified - and the signs put in the cockpit windows indicating the jet is safe to tow. We verify one of us has recorded the 'numbers' from the FMS for the trip paperwork. (OFF/ON/FLIGHT times and OUT/IN Fuel) Suction cupped iPad mounts are removed from the windows, the Sentry is verified as off and packed up so it can be charged at the hotel if needed. If it was a night flight and next flight is day, and we're about to secure the airplane - lights will be brought back to a daytime config (full bright). If it's a hot and sunny location - cabin window shades are closed and cockpit reflective covers are put in place. We also have a pin to secure the emergency exit in the cabin that gets inserted. At this point we verify requested services have been received/completed and we check with the other crewmember or crewmembers that they are done with cabin power. From here one of us typically runs the securing checklist and shuts down the APU. But we aren't done yet. Our bags get unloaded at this point and we build our 'pile'. All external panels are locked. A thorough post flight walk-around is completed, typically by both of us. Covers are put on all 3 pitots, both ice detectors, the AOA cone and both AOA vanes. Both batteries are disconnected. Whichever pilot didn't do the cockpit securing - must 'check switches' to make sure all is where it should be. Now it is finally time to make sure everyone is 'done inside' and the door gets closed/locked - and now - we can walk into the FBO, or to our rental car which has been brought planeside. We check in at the CSR desk regardless - providing contact info, verifying the schedule and services requested. This is a great time to make sure we go over the 'stuff in the fridge, the lav service, hangar arrangements, etc etc'. Only after this is all done do we leave the airport and head to the hotel where the trip PIC does 'the paperwork' which in our operation is electronic and must be submitted in a reasonable amount of time after the flight. At home base our operation has a cleaning service that will take care of many of the above tasks, and since another leg often isn't happening the next day - we're off the airplane pretty quickly. Hope this helps understand some of the things that go into this side of the business. On an international arrival after a long day mid-trip- it wouldn't be uncommon for the crew to take 30-45 minutes to do all of the above correctly.

@Skymatix @louism @lupedelupe @Webbe This was a really tough one to track down. After running several variants of Windows, I think I've finally found what was causing this. New installers are now up for Windows on the server. Please re-download and try again. This was not affecting all Windows users, and affected no Mac users.