Irish Murphy Posted March 9, 2019 Report Posted March 9, 2019 I too just downloaded the update that doesn’t update. Quote
ccbryant Posted March 9, 2019 Report Posted March 9, 2019 (edited) I tried to download the installer manytimes but i cannot download it xaviation site at 0 KB/S. Previously, i could download installer of TBM900 and Terramaxx very fast Edited March 9, 2019 by ccbryant Quote
ManxJason Posted March 9, 2019 Report Posted March 9, 2019 43 minutes ago, Cyrex1984 said: Are you sure u are on the latest version? Does it show up on the tbm startup? My bad, second time i started the sim I get the same issue you guys are having Quote
JLG Posted March 9, 2019 Report Posted March 9, 2019 Same here. I’ve reinstalled many times, completely removed the installation and installed again, and I always get that I have the old 1.1.4c version. Quote
David Lin Posted March 9, 2019 Report Posted March 9, 2019 Is there anyone upgrade successfuly here? Quote
ArthurSG006 Posted March 9, 2019 Report Posted March 9, 2019 2 minutes ago, David Lin said: Is there anyone upgrade successfuly here? I just downloaded and the version is still 1.1.4c.. 1 Quote
LKN Posted March 9, 2019 Report Posted March 9, 2019 (edited) Same here, just downloaded it a min ago and still on 1.1.4c, the window says: "my current version is 1.1.4c and the new version is 1.1.6" I've read this forum, it looks like there's no solution available now? It's still night in US in some parts so it should be fixed soon I guess it's a small updater bug or something... Edited March 9, 2019 by LKN Quote
malenca Posted March 9, 2019 Report Posted March 9, 2019 same here 116 downloaded and shows 1.1.4c....not nice feeling.... Quote
Goran_M Posted March 9, 2019 Report Posted March 9, 2019 We'll get everyone sorted out. It's now early morning at X-Aviation, so please just wait a little longer. 2 hours ago, ManxJason said: Nope still broken. @Goran_M now your dev has finished the rain work for this update, will work begin for VR rain? Saso is still looking into it. Laminar may need to do something on their end. It'll get done as soon as Saso can figure out what's going on. 2 Quote
ManxJason Posted March 9, 2019 Report Posted March 9, 2019 51 minutes ago, Goran_M said: We'll get everyone sorted out. It's now early morning at X-Aviation, so please just wait a little longer. Saso is still looking into it. Laminar may need to do something on their end. It'll get done as soon as Saso can figure out what's going on. Thanks for the update Quote
Barton W. Posted March 9, 2019 Report Posted March 9, 2019 Update issue still exist at 10:00 AM EST March 9. Know they have posted that they are working on it. May be part of the same issue but after the attempted update, the Rudder and Elevator Trim now do NOT work using keyboard assign keys. Also tried mapping joystick buttons for Rudder Trim but that does not work either. Again, might be part of their update issue but failed update did something as these trims worked before. Quote
Goran_M Posted March 9, 2019 Report Posted March 9, 2019 Rest assured, Cameron will make a post as soon as the installer is sorted out. 6 minutes ago, Barton W. said: Update issue still exist at 10:00 AM EST March 9. Know they have posted that they are working on it. May be part of the same issue but after the attempted update, the Rudder and Elevator Trim now do NOT work using keyboard assign keys. Also tried mapping joystick buttons for Rudder Trim but that does not work either. Again, might be part of their update issue but failed update did something as these trims worked before. Is your AP Trims switch turned on? Quote
skiselkov Posted March 9, 2019 Report Posted March 9, 2019 (edited) Due to a mishap in the construction of the installer, yesterday we had accidentally packaged up the old version, but it got labeled as "1.1.6" in the file name. This has now been corrected. Please go to your X-Aviation.com account and download the installer again. It will now correctly download version 1.1.6. Thank you for your patience! Edited March 9, 2019 by skiselkov 2 Quote
ArthurSG006 Posted March 9, 2019 Report Posted March 9, 2019 6 minutes ago, skiselkov said: Due to a mishap in the construction of the installer, yesterday we had accidentally packaged up the old version, but it got labeled as "1.1.6" in the file name. This has now been corrected. Please go to your X-Aviation.com account and download the installer again. It will now correctly download version 1.1.6. Thank you for your patience! Thanks! Quote
David Lin Posted March 9, 2019 Report Posted March 9, 2019 Due to a mishap in the construction of the installer, yesterday we had accidentally packaged up the old version, but it got labeled as "1.1.6" in the file name. This has now been corrected. Please go to your X-Aviation.com account and download the installer again. It will now correctly download version 1.1.6. Thank you for your patience!Thanks!Sent from my i8-Max using Tapatalk Quote
RobW05 Posted March 9, 2019 Author Report Posted March 9, 2019 (edited) Thanks! But now I wonder why did i notice such a difference in ground steering after the first update this morning? EDIT: Disregard, it think it was myself messing up my joystick profiles after the 11.32 update I did yesterday. Edited March 9, 2019 by RobW05 Quote
Shafs64 Posted March 10, 2019 Report Posted March 10, 2019 17 hours ago, Shafs64 said: I upgraded started x plane then it told me there is a new version! after i just installed it. So seems to be an issue for a few of us. picture below gives me the mesg after updating to the new one. I just installed the second update and all seem fine. will do a quick test flight to confirm. Quote
Shafs64 Posted March 10, 2019 Report Posted March 10, 2019 After test flights it seem all good thanks guys. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.