dima436393 Posted December 17, 2018 Report Posted December 17, 2018 22 hours ago, JGregory said: When you are reporting issues you also need to post your Log.txt and GizmoLog.txt files. Ok. Log.txt GizmoLog.txt
JGregory Posted December 17, 2018 Report Posted December 17, 2018 6 hours ago, dima436393 said: Ok. Log.txt GizmoLog.txt There is nothing obvious in the log files that indicate why you are having a problem. However, you do have a lot of plugins installed. I would follow the usual test procedures of removing all your plugins (except Gizmo) and then test the Saab and see if the problem persists. If the problem resolves, add back the plugins one at a time and hopefully you can determine which one is causing this issue. Note that just "disabling" plugins is not the same as removing them.
dima436393 Posted December 18, 2018 Report Posted December 18, 2018 7 hours ago, JGregory said: There is nothing obvious in the log files that indicate why you are having a problem. However, you do have a lot of plugins installed. I would follow the usual test procedures of removing all your plugins (except Gizmo) and then test the Saab and see if the problem persists. If the problem resolves, add back the plugins one at a time and hopefully you can determine which one is causing this issue. Note that just "disabling" plugins is not the same as removing them. Thanks, I'll do it
dima436393 Posted January 20, 2019 Report Posted January 20, 2019 Good day. Another problem with the Saab 340 v1.5.1. When you move the condition lever(s) to the unbeater position there is a temporary overtemperature. This is an abnormal situation. It happens all the time. How to solve this problem? (Please watch the video). I think this is a bug of this version. LES_Saab_340A_1.mp4 GizmoLog.txt Log.txt
JGregory Posted January 20, 2019 Report Posted January 20, 2019 (edited) This is a side affect of the new engine modeling that Austin introduced in the sim recently. Due to the complexity of the customized Saab engine code, trying to "fix" this would be very time consuming and most likely introduce a cascade of other issues. In addition, since the condition is momentary/temporary, it is not categorized as a"high priority" bug. I appreciate that the is not "normal" engine behavior, but messing with the engine code at this point could easily make it much worse. We will be addressing this in Saab v2.0. Edited January 20, 2019 by JGregory
dima436393 Posted January 20, 2019 Report Posted January 20, 2019 3 hours ago, JGregory said: This is a side affect of the new engine modeling that Austin introduced in the sim recently. Due to the complexity of the customized Saab engine code, trying to "fix" this would be very time consuming and most likely introduce a cascade of other issues. In addition, since the condition is momentary/temporary, it is not categorized as a"high priority" bug. I appreciate that the is not "normal" engine behavior, but messing with the engine code at this point could easily make it much worse. We will be addressing this in Saab v2.0. Thank you very much! Waiting for version 2.0. This is a wonderful aircraft!
tADEUS73 Posted February 23, 2019 Report Posted February 23, 2019 (edited) Hi guys! That's me again. As we now know there will be a 1.5.2 patch before 2.0 comes in the future I would like to report all the bugs I can in the hope they will make it into the patch! So here comes another one. There is a smear-like shining path that the wipers leave when they operate. Is it supposed to look like it looks? I know some of my custom planes have minor graphical errors after the particle updates that kind of looked similar with those sharp edges. If it's not a bug but a feature, then sorry for wasting your time Edited February 24, 2019 by tADEUS73
Chase911 Posted February 23, 2019 Report Posted February 23, 2019 37 minutes ago, tADEUS73 said: smear-like shining path that the wipers leave when they operate Same thing on my end. Why did you guys offer 40% off on this version of the AC, when your going to release a Payware version 2.0 soonish? Won't that upset someone who just purchases the plane to find out they will need to again purchase the same plane to have the updated graphic design?... I don't know. That's not my problem. Just something I thought about. Maybe a discount for those who purchase now with the 40% off coupon, to get the version 2.0 at the price we will have to pay. That might take the sting out of it.. I'm looking forward to 2.0 by the way. Will be getting it right away. Do you have an eta on that release? Thanks. Dave.
tADEUS73 Posted February 23, 2019 Report Posted February 23, 2019 I would say the sale is probably more related to the competing product (which for me as consumer is great :>). As for 2.0... I saw it mentioned already as early as in 2016, so it's not a new idea, most people knew it was coming someday in the future
Cameron Posted February 23, 2019 Author Report Posted February 23, 2019 Same thing on my end. Why did you guys offer 40% off on this version of the AC, when your going to release a Payware version 2.0 soonish? Won't that upset someone who just purchases the plane to find out they will need to again purchase the same plane to have the updated graphic design?... I don't know. That's not my problem. Just something I thought about. Maybe a discount for those who purchase now with the 40% off coupon, to get the version 2.0 at the price we will have to pay. That might take the sting out of it.. I'm looking forward to 2.0 by the way. Will be getting it right away. Do you have an eta on that release? Thanks. Dave. I don't understand your point here. If we charge for an update people will get a significant discount on 2.0, so combined with the 40% discount now it's pretty much a win-win.We have no idea when a 2.0 will even come. It's a concept and not even something in testing right now. No one is about to get screwed here.
Chase911 Posted February 24, 2019 Report Posted February 24, 2019 1 hour ago, Cameron said: I don't understand your point here. If we charge for an update people will get a significant discount on 2.0, so combined with the 40% discount now it's pretty much a win-win. We have no idea when a 2.0 will even come. It's a concept and not even something in testing right now. No one is about to get screwed here. That's all i was saying. I was thinking 2.0 was right around the corner. I stand corrected. So it's a non issue. and i agree. To compete with the other Dev is a good idea. Dave.
Goran_M Posted February 24, 2019 Report Posted February 24, 2019 6 hours ago, Chase911 said: That's all i was saying. I was thinking 2.0 was right around the corner. I wish! My wife is the only one who can get rough ETA's on stuff we do, and I can't even give her one yet. 1 1
tADEUS73 Posted February 24, 2019 Report Posted February 24, 2019 Sorry it might have been me, who gave him the wrong idea So... coming back to the windshield effect. Am I using low quality windshield washer fluid or can it be somehow fixed?
Goran_M Posted February 24, 2019 Report Posted February 24, 2019 56 minutes ago, tADEUS73 said: Sorry it might have been me, who gave him the wrong idea So... coming back to the windshield effect. Am I using low quality windshield washer fluid or can it be somehow fixed? Not really sure why you're seeing that. I'll load it up and see, then post back some time tonight or tomorrow.
tADEUS73 Posted February 24, 2019 Report Posted February 24, 2019 14 hours ago, Chase911 said: Same thing on my end. Well, not only me It kind of looks like the prop wash in my Quest Kodiak that got bugged with the particle changes (or it's totally coincidental):
Chase911 Posted February 24, 2019 Report Posted February 24, 2019 9 hours ago, Goran_M said: I wish! My wife is the only one who can get rough ETA's on stuff we do, and I can't even give her one yet. Can you have your wife provide an ETA on the bank limit fix? Lol. j/k.. i know it's being worked on. It's just frustrating with a workload while your being vectored for an approach and due to the bad turn rate you blow through the localizer every time. Then you have to go manual and turn back. I know it's on your todo list. I wish there was something we could do on our end to fix it. Dave. 1
tADEUS73 Posted February 24, 2019 Report Posted February 24, 2019 (edited) I actually wish 2.0 won't come too fast. My computer is pretty much at the edge of running the current Saab in an acceptable manner. As the new model is supposed to be more detailed I will probably buy it and then have to buy some better hardware right away Edited February 24, 2019 by tADEUS73
tADEUS73 Posted February 27, 2019 Report Posted February 27, 2019 (edited) Hi! Any info on the windshield smears? Maybe it's something on my side and I can fix it somehow? I would like to use the wipers, I love that they move so fast and loud and are totally stressing me out while landing, but the smears are too much Edited February 27, 2019 by tADEUS73
Goran_M Posted February 27, 2019 Report Posted February 27, 2019 On 2/25/2019 at 3:51 AM, Chase911 said: Can you have your wife provide an ETA on the bank limit fix? Lol. j/k.. i know it's being worked on. It's just frustrating with a workload while your being vectored for an approach and due to the bad turn rate you blow through the localizer every time. Then you have to go manual and turn back. I know it's on your todo list. I wish there was something we could do on our end to fix it. Dave. Half bank is actually fixed. We're getting all the engine issues fixed first before we push the update out. 4 minutes ago, tADEUS73 said: Hi! Any info on the windshield smears? Maybe it's something on my side and I can fix it somehow? I would like to use the wipers, I love that they move so fast and loud and are totally stressing me out while landing, but the smears are too much We haven't actually checked the glass yet. I seriously doubt it's anything you can do to fix. To me, it just looks like crossing mesh, but in any case, we'll find out what it is and, if it's something on our end, a fix will be in the next update. 1
JGregory Posted February 27, 2019 Report Posted February 27, 2019 3 hours ago, tADEUS73 said: Hi! Any info on the windshield smears? Maybe it's something on my side and I can fix it somehow? I would like to use the wipers, I love that they move so fast and loud and are totally stressing me out while landing, but the smears are too much You might want to remove any plugins that are drawing environment effects and see if that helps.
tADEUS73 Posted February 27, 2019 Report Posted February 27, 2019 (edited) Hi, thanks for trying to help me As far as I know I don't have any environmental ones. That's my plugin list (Flywithlua is from today, so it cannot be the cause): Dreamengine is a native sound mod of the Embraer 110, the smart things are also from the Emb. EDIT: For clarity added the plugin list that is active while flying the Saab and not another plane as well as the log. Log.txt Edited February 27, 2019 by tADEUS73
JGregory Posted February 27, 2019 Report Posted February 27, 2019 25 minutes ago, tADEUS73 said: Hi, thanks for trying to help me As far as I know I don't have any environmental ones. That's my plugin list (Flywithlua is from today, so it cannot be the cause): Dreamengine is a native sound mod of the Embraer 110, the smart things are also from the Emb. EDIT: For clarity added the plugin list that is active while flying the Saab and not another plane as well as the log. Due to the number of plugins that you have, I suggest you do the usual test as follows: 1. Remove all the plugins except for Gizmo. 2. Load the Saab and see if the problem still exists. 3. Add the plugins back in one-by-one and re-load the Saab to see which plugin may be causing the issue.
tADEUS73 Posted March 1, 2019 Report Posted March 1, 2019 (edited) Hi, So I've tried it with plugins and without plugins and don't see any difference. It might be a faulty installation, but it's strange that Chase911 would have the same one. As I understand you can't reproduce it on your end? Also, there are no touchdown sounds hearable from the interior and no flaps sounds. I guess the aircraft is large enough for the flaps themselves to not be audible, but it's the only aircraft I own that doesn't have any audible feedback for the flap lever. Is it like this in the real Saab? The touchdown/rolling sounds you can hear on the outside are rally cool. Or maybe it's my faulty installation striking again Edited March 1, 2019 by tADEUS73
Goran_M Posted March 2, 2019 Report Posted March 2, 2019 Some sounds are missing, like flap handle sounds, but keeping in mind this add on came out in late 2013, where FMOD was non existent in X-Plane. The actual flap extensions sounds are 100% not loud enough to hear in the cockpit. Sometimes you may hear the hydraulic pump re-pressurizing when flaps or landing gear extend. All this will change in V2, when we add FMOD and authentic sounds throughout the aircraft. We'll look into your issue a little more.
N1K Posted March 2, 2019 Report Posted March 2, 2019 Fairly accurate.. The feedback for the flap lever is the guy/girl next to you saying the word 'selected'
Recommended Posts