Jump to content
  • Latest X-Plane & Community News

    News from all over the X-Plane world!
    • X-Pilot
      Well, Captains, it's that time again! Laminar has released yet another update with a laundry list of improvements. Check it out below and get your updaters going!

      All buttons on the FMS's should work properly even if there are two different FMS's in the airplane.

      Wind-shear and turbulence model refined a little more to be more complex in it's randomness, and not always quite so strong in what are requested to be moderate conditions, and to change in a reasonable way with altitude. This should help improve wind and turbulence modeling, especially with Real-Weather turned on.

      X-15 drop and Space-Shuttle-carry missions should work properly now.

      Right-mouse drag to look around in 3-D cockpit command-look view, and mouse scroll wheel zooms. This is a pretty convenient way to look around the 3-D cockpits. (This works in "command" look mode, not mouse look mode! So when you are not right-mouse dragging, the view stays still and you can manipulate the 3-d panel.)

      Track-IR functions in ALL 3-d cockpit views now... It has WORKED for years, but is now easier to find since it engages in ALL 3-d cockpit views, not just one.

      Cool new feature for QuickTime movies: Movie quality! Set it high or low depending on how good you want it to look... and how much disk space you want to burn!

      External visuals should sync-up faster in the multi-machine setups, which should save some time in real flight-training scenarios.

      Landing lights, spotlights, and spotlight aiming-angles all go from master machine to external visuals now.

      Plane-Maker system screen: Option to auto-load with current values, or not, airspeed, vertical speed, and altitude when a new autopilot mode is engaged.

      Visibility tuned to change with altitude in a more accurate way to follow the reported weather more closely.

      AI planes should be better about holding desired altitude now, resulting in less annoyed air traffic controllers.

      Fixed: incorrect warnings about missing scenery

      Fixed (partly): the ocean shading should have fewer sharp lines on it. Far view shading of the ocean is still a work in progress...more color tuning in a future beta.

      Fixed: wing flex now works - X-Plane was incorrectly zeroing out wing-flex on some v10 planes.

      Fixed: sharp turns in taxiway lines now render correctly at KSEA and other airports.

      Fixed: right button on Linux is now the "right" button, not the scroll wheel itself.

      Fixed: plugins won't crash if they try to read the weather from XPluginStart

      Roof behaviors now match v9 for legacy facades
      A bunch of new features to control the exact appearance of facade-attached objects - docs coming soon!

      New facade features: attached objects on facades appear and disappear with "objects" rendering setting for better performance.

    • X-Pilot
      Precision Manuals Development Group (PMDG) has announced their entry into the X-Plane 10 market. A developer from the X-Plane community has been brought on to assist in the transition.
      Robert Randazzao, Owner and Operator of PMDG, stated:
      "I have seen/read a bunch of hyperbole on this topic of late- so I wanted to make very clear that yes, PMDG is going to develop a product for Xplane10. It is going to be a conversion of either the BAe JS4100, the NGX or the [secret project: censored]."
      You can read the full announcement in this post on their support forums .
      Additionally, some X-Pilot community members have chimed in on this subject and you can too! Check out this thread here in the forums.

    • X-Pilot
      X-Aviation is pleased to announce they are the main sponsor of the ZLA ARTCC 2012 Poker Run!
      X-Aviation will be giving away over $700 in prizes to those that secure one of the top positions in the competition!
      Details about this competition and how to win can be found on the ZLA ARTCC 2012 Poker Run page.
      The event takes place January, 28, 2012 @ 2100Z, so check it out!

    • X-Pilot
      Laminar Research has released a new version of X-Plane 10, so get those updaters going! The list of fixes/additions includes:
      AI Aircraft now climb/hold altitude better dramatically reducing the frequency of hearing ATC yell at them.
      Protect against aircraft doing something WAY out of bounds like departing instead of taxiing or holding short.
      Stability improvements
      Step descents dramatically improved
      ATC should now tell the user what approach they're setting them up for
      ATC "Radio" box text color tweak
      Fixed AI aircraft names

      Lots of tuning and tweaking to make everything just right here in this release:
      Plane should be able to hold still quite a bit better during runup, and not slowly drift with the brakes on!
      Manifold pressure model is now improved to be more like real planes.
      French and Spanish translation improvements to make the menus a hair more accurate in those languages.
      Better vertical resolution of the NMEA strings for newer (real) moving maps that plot vertical paths as well.
      More resolution in the FDR replays, so even little RC drones with small movements can have their paths recorded perfectly.
      Cylindrical projection should be able to handle changing the screen-res on the fly with no problem now.
      Better metar parsing: X-Plane should not be confused over various comments in the metars about the wind.
      As well ATIS should report the visiblity accuratley in all cases. Earlier versions did not report the very low-vis cases correctly.
      And, an option to re-scan real-weather to go along with re-download.
      The heat-blurr rendering effect is now offset by the exhaust offset specified in Plane-Maker, which is useful.
      As well, the heat blurr now draws for ALL planes, not just the one you are flying.
      As well, you can specify the exhsust offset PER ENGINE!
      Proper cloud textures used even if you have both cumulus and cirrus layers at the same time.
      The yaw-string is visible for the gliders and helos.
      A-I airplanes should be a bit more robust, really adding power if needed to get out of ditches or up hills, and not having systems break, rendering the plane stopped or otherwise motionless.
      TCAS system should only call out guys with their transponder on...and the AI should only turn on their transponder for flight, not taxi! This is getting down to a pretty crazy level of realism, here.
      New failure: brown-out! In the upper right of the first page of failures.

      A pretty nice failure for helos, added for use in real military training now!
      Aircraft and Attached Objects:
      Aircraft can now have any number of attached objects; the interface is revamped to show this.
      Attached objects now have per object control over LOD, shadowing, and pre-fill. These options let you tune your plane for maximum performance. Click the "More Info" button in the Plane-Maker screen to view a description of what the settings do and how they should be used.
      The 747 and CirrusJet now have some of the pre-fill and shadow options set to improve 3-d cockpit framerates; we'll work through the other planes during beta.
      Wing flex for v9 planes now defaults to off; this prevents graphic errors when the attached parts aren't authored to flex with the wings.
      Plane-Maker taxi lights don't shine into the interior of the P-180.
      Fixed culling and drawing of OBJ-based weapons in the sim and Plane-Maker

      Other random stuff:
      The fps test is fixed to not sit in the joystick calibration screen.
      New smoke puff artwork

    • X-Pilot
      Carenado has released their Cessna 185F Skywagon for X-Plane. The aircraft is said to have similar behaviors compared to the real aircraft, as well as a detailed 3D exterior and interior model. This package includes high quality sounds, various types of eye candy, four liveries, and more.
      For a full list of features or to purchase the aircraft, head on over to Carenado's C185F Skywagon page.

    • X-Pilot
      X-Aviation has released an update to the Take Command! CRJ-200.
      This update brings the product to version 1.4.1 brings the CRJ simulation to a whole new level with all-new holding pattern logic, support for STAR transitions, and much more!
      See more info about this update by viewing the update thread in the forum.

    • X-Pilot
      Shade Tree Micro Aviation (STMA) has released their latest project: the Kaman K-1200 K-MAX.
      They state that the "K-MAX is a unique helicopter used for lifting operations. Thanks to its two rotors turning in opposite directions it is extremely stable in all conditions."
      More information can be found by visiting their product page at the org store.

    • X-Pilot
      Laminar Research has just released Beta 6 for X-Plane 10.03!
      Start up those updaters and get the ball rollin'!
      A list of changes are as follows:


      Fixed bug preventing lowercase routings from working
      Fixed numerous crashes in the ATC system.
      Fixed bug causing AI planes to suddenly taxi through a hold short line wildly.
      Fixed bug causing the view to change while using the arrows to navigate ATC menus.
      Adjusted timers to let users communicate with ATC more easily.
      Adjusted "off course" tolerances to make it less annoying.
      Improved automatic layout generation at KTCM (and hopefully other airports that are long and thin)


      CRJ and other aicraft cockpits should work at night in HDR mode on OS X Lion.
      Sim is more tolerant of missing textures - the rules now match v9 for OBJs.
      Slight improvement to braking model to aid in erroneous aircraft drifting.
      Baron 58: Added cockpit night lighting. Use the four lighting knobs under the copilot yoke to adjust.
      F4 Phantom: Adjusted the flight model for better in-flight handling and more reasonable manners on approach and landing.
      Fixed seg fault in weight/weapons window.


      Fixed cut-off global lights on ATI hardware.

    • X-Pilot

      Carenado Begins Holiday Sale!

      By X-Pilot, in News,

      Carenado has announced a special 10-day Holiday Sale on all of their products, including those for X-Plane!
      From December 15th to the 25th, Carenado will be giving discounts of 50% off on all X-Plane products.
      To get in on this great deal head on over to Carenado's website!

  • Create New...