ois650

I flew on Vatsim a couple of days ago with no complaints from ATC. I also tested it using the ATC client Euroscope. There should be no issues and any disparities are likely on the ATC side of things. FWIW X-Plane 12 will have realistic atmospheric simulation so ATC folks will have to fully fix things on their end eventually. Brgds

Good afternoon, I have checked this out using Navigraph data and the ILS approaches are in the 650's FMS, they're just listed as LOC approaches. I checked with the Zibo and the same approaches show up. This is a Navigraph issue and I suggest you raise it with them. Brgds,

You can ring the pax on the phone to hurry them up

It's possible in the real airplane too if you're flexible.

Just to expand a little, each crash log ends in a backtrace (99% of the time anyway...). The backtrace tells you what caused the crash. In your case, the backtrace is this: There's nothing pointing towards the Challenger there. I've attached a Challenger backtrace below so you can see the difference.

Good evening, I have filed this for further investigation. Thank you for your report. Brgds,

Hello, Unfortunately your log has no evidence of a CTD so we cannot gain anything from that. Let us know if it happens again in the future. Kind regards

Hi, This is now filed for further investigation. Kind regards

Hi, This crash wasn't caused by the Challenger. Brgds

Hello, I've filed this for investigation, but it would be useful if you could provide us with more information. Has it happened since? Did you press a specific button? Details help when finding the root of these crashes. Brgds

Hi, I've filed this anyway in case we can gleam something from the backtrace. Thanks

Hi, I've filed this for fixing. Thanks for your report. Brgds

Hi, I'm not sure if the GPU is really the issue here but I've filed it so we can get to the bottom of what really is. There's a traceback pointing elsewhere. Thanks for your report. Brgds

Turn down your effects in the control console. I have XPR and have no issues.

Follow the checklist please, engine start is very straightforward

Unfortunately I cannot view your video as I'm not viewing this on an Apple device (it's in .mov format). Was the aircraft tracking towards the runway while in crabbed flight?

In options (networking) make sure realistic temp is de-selected.

That's not a quick fix, that's just following the checklist. See below from flight compartment checklist.

Hi all, This was tested in the (actual) 650 and the K does need to be added. You will see this in the next update. Rich - thanks for the input as always, much appreciated. Brgds

Test the anti-skid as per the before landing checklist to clear that CAS message. Test

What exactly are you transferring? Screenshots would help.

You need to walk up the stairs and into the cockpit

Recommended Videos: Reflected Reality Simulations: Preparation and Power Up Reflected Reality Simulations: Fuelling Foxtrot Alpha Aviation: Walkaround Foxtrot Alpha Aviation: Power Up APU and Electrical Foxtrot Alpha Aviation: Panel Checks and FMS Setup Foxtrot Alpha Aviation: Power Up Oxygen and Hydraulics Foxtrot Alpha Aviation: SPS, Radios and Avionics Foxtrot Alpha Aviation: EFIS Setup and Takeoff Briefing Foxtrot Alpha Aviation: Before Start, Start and After Start Foxtrot Alpha Aviation: Taxi Checks Foxtrot Alpha Aviation: Takeoff, Climb and Cruise Foxtrot Alpha Aviation: Weight and Balance

1) Currently there is no way to determine CG within the add-on. If you have an Apple device check out the video below. If not, I would suggest 24, 25 and 26 percent depending on weight. See what works for you. 2) The luggage hold will be accessible in a future update.

Hello, There was some issues with XPRealistic on initial release but should be working fine now. Can you confirm which version of the Challenger and which version of XPR you're using?