Ch.Cole

Hi, I'm getting a crash if I try to load the MU in XP 12.05b1. I can start a flight without any issue in the Aerolite, but when I want to switch to the MU, XP closes. 0:09:10.039 I/WIN: Showing subscreen Freeflight 0:09:10.039 I/OVR: User is entering the holodeck. 0:09:10.039 I/WIN: Opened window Primary V11 UI 0:09:18.014 I/FCG: Applying changes from Flight Configuration screen 0:09:18.014 I/FCG: Starting new flight in Aircraft/X-Aviation/Mitsubishi MU-2 Marquise v2/xsMU2B60_4B_GLASS.acf at 2N 0:09:18.014 D/STM: Transitioning from state state_Normal to state_NormalLoading 0:09:41.925 G64: core: Calling OnAircraftUnload:(Aircraft/Laminar Research/Aero-Works Aerolite 103/) 0:09:41.925 G64: core: Run: [OnAircraftUnload] 0:09:18.014 I/ACF: Loading airplane number 0 with Aircraft/X-Aviation/Mitsubishi MU-2 Marquise v2/xsMU2B60_4B_GLASS.acf 0:09:42.403 G64: debug: --- -- --- -- --- -- --- -- --- -- Firmware Reboot -- --- -- --- -- --- -- --- -- --- -- --- 0:09:42.403 G64: core: Aircraft File: (Aircraft/X-Aviation/Mitsubishi MU-2 Marquise v2/xsMU2B60_4B_GLASS.acf) 0:09:42.406 G64: core: MD5 Hash: (c9dc2097984aba57866dddec79c9a4c0) 0:09:42.406 G64: core: Description: (Mitsubishi MU-2B-60 v2 Published by X-Aviation) 0:09:42.406 G64: core: Author: (TOGA Simulations) 0:09:42.409 G64: core: Run: [OnBeforeReboot] 0:09:42.409 G64: debug: --- -- --- -- --- -- --- -- --- -- Firmware Reboot -- --- -- --- -- --- -- --- -- --- -- --- 0:09:42.409 G64: core: curl_easy_init() provided by:[D:\X-Plane 12\Resources\plugins\Gizmo64.plugin\win_x64\libcurl.dll] 0:09:42.410 G64: core: Boot Count: 4 0:09:42.410 G64: core: OpenAL: Shared OpenAL context.. 0:09:42.413 G64: debug: Firmware v21.03.20.0220 0:09:42.440 G64: debug: gxt: AutoLoading.. 0:09:42.440 G64: debug: gxt.load: Console 0:09:42.441 G64: debug: gxt.load: ToolTray 0:09:42.442 G64: debug: gxt.load: Mute 0:09:42.444 G64: debug: gxt.load: Preferences 0:09:42.445 G64: debug: gxt.load: RebootButton 0:09:42.446 G64: debug: gxt.load: GateKeeper 0:09:42.449 G64: debug: GK: Load license from disk.. 0:09:42.450 G64: debug: GK: License is good. 0:09:42.451 G64: debug: GK: IPC v21.03.18 loaded. 0:09:42.451 G64: debug: gxt.load: MAXX_RWC 0:09:42.452 G64: debug: gxt.load: LuaGC 0:09:42.453 G64: debug: gxt.load: Shell 0:09:42.454 G64: debug: gxt.load: Stats 0:09:42.455 G64: debug: gxt: Completed AutoLoad. 0:09:42.455 G64: debug: firmware_init.lua completed. 0:09:42.456 G64: core: Run: [OnKickStart] 0:09:42.460 G64: debug: KS: Gen 2 loader.. [Gizmo64]: Dataref 'sim/cockpit2/controls/flap_ratio' has been replaced. Please use the new name. [Gizmo64]: Dataref 'sim/weather/turbulence[0]' has been replaced. Please use the new name. [Gizmo64]: Dataref 'sim/weather/turbulence[1]' has been replaced. Please use the new name. [Gizmo64]: Dataref 'sim/weather/turbulence[2]' has been replaced. Please use the new name. --=={This application has crashed because of the plugin: Gizmo64}==-- Same behaviour if I start directly in the MU. What could be the issue here? BR, Chris

Exactly. VOR and ADF. For planning, I can suggest skyvector.com (online) or littlenavmap (on your pc)

Are your generators on? They should be off, I think.

Intake covers removed via setting window?

Inverter on? Condition Levers seem a bit low (set them to taxi, maybe? Fuel Pressure?

Main fuel Valves opened? RCS switches on Run?

I understand that there's some uncertainty, but I'm quite sure that the SBY button and the HDG/ALT shouldn't be illuminated at the same time, and nearly certain, that with SBY pressed and illuminated, the AP shouldn't still follow HDG when I change the selected heading. But from my experience with you guys, it will only take a short time, and the plane will keep getting better

Ghost throttle is great, I use lift zone and below. I'd just like the additional option of "show on throttle change" (maybe as checkbox), and maybe a way to set the fading time.

V2.0.2 My SBY button is always lit, even with e.g. HDG and ALT also lit, AP engaged, and AP following the heading and holding altitude.

I have the same issue, I think: Case 1: Power Lever Upper Limit (PLUL) 0.6 PLLL 0.45 HPDR 0 Auto-stop power levers at detent not checked Throttle axis assigned to 3 and 4 Throttles full back gives Flight Idle, Full Forward gives max reverse. Case 2: same as above, but auto-stop checked works as expected. So without auto-stop, you get the strange behaviour. I'd also like to have a way to set the "auto-stop" to say 0.35 hardware axis travel.

I think a $20 discount on a very good new plane is great. It's not an "upgrade", it's a brand new plane.

My use-case with the Warthog Throttle is that i usually move the PL synchronously, and I'd like to press one button to move both levers below Flight Idle. There's one placed very conveniently on the left throttle. Basically what I did in my script you took a look at. One button to enable either or both levers to go below Flight Idle.

You need to look at the prop speed gauge (the one that reacts to the prop levers)

if you use the xplane "servos disconnect", that works, although it doesn't move the button in the VC

There are several issues here. First of all, see the warning. The script is not supposed to be used with the update. Second, you have to assign one axis to "Throttle 3" and one to "Throttle 4". Long story short, delete my script, Axis "Engine 1" to "Throttle 3" and Axis "Engine 2" to "Throttle 4" The command should be "Lift Power Levers", a custom MU-2 command. Feel free to post again if there are further issues, gerne auch auf Deutsch.

No, like mentioned above, you need to assign the thottles to other axis for the MU-2. Not to 1 and 2.

You need to assign the throttles to axis 3 and 4, check the documentation.

You might have forgotten to attach the lua script... ... now it's there

just to add, Fuel Flow at flight idle is above 270 per engine...

@XST no, that's not the issue. It even happens when the PL are at full power (forward) and I press the button.

I just tested. They work slightly different. Lift Right only works it the PL is below the detent, you can't press and then move below Flight Idle. you also don't get the "lifting" animation. Lift left works as expected.

Pressing the button for the "lift both" command without moving the Power Levers (hardware), both power levers move to full reverse. Axis 3 and 4 assigned. Auto-Stop has no effect (other than disabling the right engine's response to my axis input)

I can confirm that while both values (22 and 23 in DataRefTool) change with Auto-stop de-selected, only the left Power Lever moves. With it selected, both move. I can revert between both modes and always get the same results.

Airspeed 150 CAS (100-180) Alt below 20.000 pressure Alt SRL ON Synchro OFF EGT below 200 (if feasible) CL Min Cruise PL 1/2 " forward Flight Idle Start Selector OFF/AIR START Ignition OFF RSC-Switch RUN Unfeather Press and hold to 30% RPM min that should restart it

Is this after you start of after landing? Did you take the props off the locks?