IXEG 737 Classic Missing Sounds

[N452MK]

Installed but no sounds??? in and back into the sim and same thing, any ideas?

[N452MK]

3 times installed and no sounds, not good.... was waiting all week for this plane....

FYI my sim traffic has sounds as normal no issues there, I can hear everything outside of the aircraft so something is wrong with the aircraft not the sim

Edited September 15, 2023 by N452MK

[waldorf]

Yup... same here.. no sounds although FSrealistic and global traffic happily dishing out the sound effects. All sound sliders to full in iXEG prefs and no GPU either!

[RenatoSampaio]

Everything is ok here, I just had no sound when logging in the first time with the license, right after restarting the simulator, it was fine. If you use xorganizer, don't forget to enable the gizmo plugin

[Litjan]

Also make sure that the sound output device in your Windows setting and in X-Plane are the same.

[judeb]

Most sounds working, but no sound from autopilot if joystick is moved to disable autopilot, but when Disengage is pressed it does sound as expected.

Edited September 16, 2023 by judeb

[Litjan]

1 hour ago, judeb said:

but no sound from autopilot if joystick is moved to disable autopilot

Strange, thanks for reporting, I will check and file if I can confirm it.

[hermannk1]

15 hours ago, RenatoSampaio said:

Everything is ok here, I just had no sound when logging in the first time with the license, right after restarting the simulator, it was fine. If you use xorganizer, don't forget to enable the gizmo plugin

Have to enable sound in Settings (top left corner) each time I go into this aircraft.  Or I get no sound.

[Litjan]

4 hours ago, judeb said:

Most sounds working, but no sound from autopilot if joystick is moved to disable autopilot, but when Disengage is pressed it does sound as expected.

Hi @judeb, I think what is probably happening (I just tested this) is that the autopilot stay on when you override the modes (the green CMD still shows) but you revert to CWS (control wheel steering) modes (shown in yellow).

You can´t disengage the autopilot by moving the joystick, it will only fall back to CWS and the autopilot warning light flashes (but no warble).

[judeb]

17 hours ago, Litjan said:

Hi @judeb, I think what is probably happening (I just tested this) is that the autopilot stay on when you override the modes (the green CMD still shows) but you revert to CWS (control wheel steering) modes (shown in yellow).

You can´t disengage the autopilot by moving the joystick, it will only fall back to CWS and the autopilot warning light flashes (but no warble).

Yes, correct, 

 

[nikit]

I think I have the same problem, I have noticed that when loading the 737 Ixeg the sound sliders in the Xplane configuration automatically go down completely and even if I raise them again, they go down again. When I try other airplanes I can turn the sound controls back to normal and stay there but when you reload the Ixeg the controls go back down. I hope it helps locate the problem.

It is possible that I also have a level 2 activation problem.

[VirtualCPT]

I have exactly the same problem, no sounds in the IXEG at all. Aircraft Exterior and Interior as well as Environmental are set to 0 and cannot be set to anything else. Really weird, everything is working fine with other planes.

[Pils]

4 minutes ago, VirtualCPT said:

I have exactly the same problem, no sounds in the IXEG at all. Aircraft Exterior and Interior as well as Environmental are set to 0 and cannot be set to anything else. Really weird, everything is working fine with other planes.

Log?

[VirtualCPT]

Here we go...

Log.txt

[VirtualCPT]

Hm, just found this line in the log:

IXEG: Level-1 PASS / Level-2 FAIL. License invalid

I will try the lastest update, seems like I have a license issue. However, the UI said everything is fine.

 

[Pils]

33 minutes ago, VirtualCPT said:

Hm, just found this line in the log:

IXEG: Level-1 PASS / Level-2 FAIL. License invalid

I will try the lastest update, seems like I have a license issue. However, the UI said everything is fine.

Yes, do the the reinstall. There's no UI for this particular check.

[VirtualCPT]

Problem solved, happily flying now...