Gjalp Posted November 11, 2011 Report Share Posted November 11, 2011 Hi Pete, this plane is just getting better and better.....as to autopilot, I would leave it out. I fly (simulated that is....), mostly LSA and GA planes that have either no auto or very basic autopilots in them....and even then I dont use them as the trim controls (if installed on the plane Im flying), work just fine. The other planes I fly are all equipped with very useful radio nav systems (the F-27 comes to mind straight away....). All the other planes I fly, mostly the payware ones like the Dash 8, have FMC's which I can set using either vroute or Goodway.I guess what I am trying to say is.....an autopilot in a beaver isnt flying in the "spirit" of the beaver. They flew fine without them for many years, why would they fly any better with them?Just my thoughts......Slainte,AndyNZCH Quote Link to comment Share on other sites More sharing options...
ksgy Posted November 11, 2011 Report Share Posted November 11, 2011 Prefer without the autopilot. With autopilot it simply loses the point of flying this aircraft Keep up! Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted November 12, 2011 Author Report Share Posted November 12, 2011 Thanks for all the feedback so far, with respect to the autopilot!Just before the weekend, I wanted to show you the Beaver equipped with 35'' tundra tires and the small change to the fairing, but detail is everything. The Alaska cargo door has not been cut in yet, but you will see it soon. Also that last passenger seat row will go, so you have more space for your cargo....and a further shot of the amphibian cockpit. Still a few items missing, but 90% done. Quote Link to comment Share on other sites More sharing options...
eaglewing7 Posted November 12, 2011 Report Share Posted November 12, 2011 To be honest, I'd hate to see an autopilot within the vintage Beaver cockpit, but since you are making a modernized look as well, with a G430, I don't see why one variant shouldn't include a simple autopilot as well... Quote Link to comment Share on other sites More sharing options...
namaui Posted November 12, 2011 Report Share Posted November 12, 2011 I agree with eaglewing, an autopilot wouldn't be out of place next to a G430. An S-Tec wing-leveler with annunciator lights for manual pitch trim would probably be appropriate. Even something with altitude hold and heading/nav functions would be welcome. Quote Link to comment Share on other sites More sharing options...
eaglewing7 Posted November 12, 2011 Report Share Posted November 12, 2011 (edited) I agree with eaglewing, an autopilot wouldn't be out of place next to a G430. An S-Tec wing-leveler with annunciator lights for manual pitch trim would probably be appropriate. Even something with altitude hold and heading/nav functions would be welcome.I'd agree with that, and it might be a good idea to look at what Denis put in his Grumman Goose aircraft, what ever model that autopilot is...Here is a picture of it in a real Goose, and I saw one once in a Beaver for sale as well.http://www.controlle...SE/1217895.htm?Edit: Here it in a really modernized Beaver. The model is S-Tec 60 Autopilot.http://www.controller.com/listingsdetail/aircraft-for-sale/DEHAVILLAND-DHC-2/1955-DEHAVILLAND-DHC-2/1170418.htm? Edited November 12, 2011 by eaglewing7 Quote Link to comment Share on other sites More sharing options...
Simmo W Posted November 12, 2011 Report Share Posted November 12, 2011 Stuff that, I'm buying that real Goose! What condition!Now to convince the family that they can live in it. They'll have to. Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted November 13, 2011 Author Report Share Posted November 13, 2011 Here is a picture of it in a real Goose, and I saw one once in a Beaver for sale as well.http://www.controlle...SE/1217895.htm?Yes, Beavers with an A/P these days use the STEC 50 or 60 most of the time and if I put something in the modernized Beaver, it would most probably be the STEC50. Also, I would make this A/P hidden by default and it could be made visible via a clickspot, so people who don't like to see that A/P can get rid of it.However, like I said before, I am going to override all X-Plane flight control surfaces by my flight model plug-in (ailerons, rudder, elevators, trim controls, flaps etc.). That means that they are not connected to X-Plane internals anymore, and I have to take care of driving them myself. I have to read the joystick input, keyboard etc. and move the flight control surfaces accordingly. That also means, that even if you assign buttons to the X-Plane internal autopilot, it will not work, as X-Plane can not drive control surfaces, because they are overriden.You might say "Well then don't override the flight control surfaces", but that is not really an option, because I want to have full control of them myself, without being limited by planemaker settings and internal logic. So that is no option.Most of the add-ons probably use the X-Plane default autopilot and it will be tuned in planemaker. However, I will not have that option, due to the overriden control surfaces. That means the full autopilot control logic has to be coded by me. I can not use any of the default stuff. Well, the technology and coding is no problem for me, but it is a good amount of extra work. Also this is no problem for me.However, I am thinking about if it is really worth it, because I could use that time to make the Beaver as an aircraft the best it can be, with respect to the flight model, the engine and systems simulation and things that will increase the immersion factor even more.The Beaver is a hands on aircraft and usually doesn't make VERY long trips , and I can not really imagine that someone wants to fly a nice and beautiful aircraft with an autopilot.That's like raising your hand for a ride in the backseat of a beautiful car, when you would have had the option to drive it. Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted November 13, 2011 Author Report Share Posted November 13, 2011 OK, the chances that you will get your STEC50 autopilot in the modernized Beaver just increased. After the second coffee this morning, I figured that I can deselect my control surface override flag, as soon as someone gives power to the A/P. The Beaver control surfaces are then driven again by X-Plane, based on planemaker settings. In this case, I can also use the internal autopilot logic. Just checked it and it is working. Therefore, I will be able to replicate the STEC50 A/P behaviour without too much efford. I won't use it, but I know some off you will.For the people that also won't like to see an A/P in the modernized version, there will be the option to hide it.However, don't expect to see an A/P or a GPS in the vintage Beaver cockpit. This will be for real hands on pilots only. Quote Link to comment Share on other sites More sharing options...
karingka Posted November 13, 2011 Report Share Posted November 13, 2011 Yeah, I would like a simple A/P too. Plane looks amazing, by the way!!! Quote Link to comment Share on other sites More sharing options...
SkyHarbor Designs Posted November 13, 2011 Report Share Posted November 13, 2011 Agreed, the AP should be kept out of the vintage Beaver, but there is no reason why a modern version shouldn't have it, especially for high precision instrument flying. Quote Link to comment Share on other sites More sharing options...
hobofat Posted November 14, 2011 Report Share Posted November 14, 2011 However, don't expect to see an A/P or a GPS in the vintage Beaver cockpit. This will be for real hands on pilots only. Amen. Quote Link to comment Share on other sites More sharing options...
steven winslow Posted November 14, 2011 Report Share Posted November 14, 2011 Amen.+1 Amen, and Amen! Quote Link to comment Share on other sites More sharing options...
Xflyboy Posted November 14, 2011 Report Share Posted November 14, 2011 Fantastic Pete!Can't wait to fly it. Quote Link to comment Share on other sites More sharing options...
Ntr09 Posted November 15, 2011 Report Share Posted November 15, 2011 Indeed fantastic! Amen.+1 Amen, and Amen!Amen! Quote Link to comment Share on other sites More sharing options...
steven winslow Posted November 15, 2011 Report Share Posted November 15, 2011 Pete, have you considered the KLN90B from EADT? Could be a fun retro solution to the GPS question.http://www.eadt.eu/index.php?New-EADT-project-KLN90B-GPS-Device Quote Link to comment Share on other sites More sharing options...
Cameron Posted November 15, 2011 Report Share Posted November 15, 2011 Pete, have you considered the KLN90B from EADT? Could be a fun retro solution to the GPS question.http://www.eadt.eu/i...N90B-GPS-Device Quote Link to comment Share on other sites More sharing options...
steven winslow Posted November 15, 2011 Report Share Posted November 15, 2011 Doh! Didn't realize it was the same thing. Thanks, Cameron! Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted November 15, 2011 Author Report Share Posted November 15, 2011 Here is a shot of the seatbelts you will use in the Beaver..."Hey you autopilot lovers". Do you see what is sitting on the pilot panel? A brandnew STEC50 just for you ...and all the others can just hide it or use the vintage version of the Beaver, which you will see soon as well.I guess this will make some of you happy and that makes me happy. In the end it is all about you and what you like, and not about me. As long as I am doing what I love and I am passionate about it, I will try my best to create a great user experience for you. Quote Link to comment Share on other sites More sharing options...
karingka Posted November 16, 2011 Report Share Posted November 16, 2011 You'll get a hell lot of customers if you keep that philosophy. Great to see such a passionate developer! Quote Link to comment Share on other sites More sharing options...
Gjalp Posted November 16, 2011 Report Share Posted November 16, 2011 oh, this just gets better and better (might have said that before....but its true!), definitely cant wait to fly this one Slainte,AndyNZCH Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted November 17, 2011 Author Report Share Posted November 17, 2011 OK, here is your future office in the modernized Beaver. Just a few placard plates missing, but about 99% done and uv unwrapping of the interior will start soon. The exterior of the amphibian Beaver is already unwrapped.Thought you might wanna see ...and here a shot without the flight yoke, which you will be able to hide, to have better access to switches or instruments if you don't use TrackIR.Hope you enjoy! Quote Link to comment Share on other sites More sharing options...
Simmo W Posted November 17, 2011 Report Share Posted November 17, 2011 Amazing! Quote Link to comment Share on other sites More sharing options...
Gjalp Posted November 17, 2011 Report Share Posted November 17, 2011 Are there any options for us cockpit builders who have dedicated hardware for throwing switches and levers etc? I have the Saitek yoke pedals and throttle levers but I also have some Desktop Aviator boards with switches and levers as well.Just interested is all Slainte,andyNZCH Quote Link to comment Share on other sites More sharing options...
steven winslow Posted November 17, 2011 Report Share Posted November 17, 2011 I sure hope this sweet bird is going to be compatible with Saitek panels. I have Radio Panels along with the Multi Panel and the Switch Panel. I'm sure there won't be any problems with the yoke, throttle quadrant and rudder pedals. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.