mmerelles

A M A Z I N G this thing feels real! Too bad i have no money to build up an entire cockpit around this IXEG733C

Impressive thanks for the reply

Hi IXEG team: on the fms, will the fms support full sid/star procedures? i am particularly asking about those which include conditional orders, will they be supported release 1? future? not decided yet?

just curious, does the real thing allow you to change the speed and/or altitude restriction of your next WP currently active?

I do not know anything about the J41. When the Saab 340 is on the ground, you operate it by setting the throttles on the ground range (BETA MODE) which means the engine enters on a constant/rpm ratio (aprox 1100 rpm don't remember the value) and having the CLs on MIN or MAX does not make any difference. When you are moving the throttles on beta mode you are not adding or removing engine trust, you are actually controlling the blade pitch 10 degree to have a consistent response for taxing, so you are avoiding to deal with the slow response nature of turbo engines to throttle setting which makes them impractical on the ground for taxing. From after start the CLs goes to MAX because they do not have to deal with taxing, that is what the procedure calls for maximum performance on takeoff and safety. If you takeoff anything lower than MAX and you loose one engine during climb out the other engine will not provide enough torque and you will crash, they must be in MAX for safety no matter you are brave enough to risk your life and others in such case something goes wrong. The aircraft can handle a MIN CL takeoff on given conditions but no profesional pilot will be dumb as enough to do that.

On the pax door issue, it could be a bit difficult to text explain. So look at this video starting at 00:47 for the clic spots to close it. it is quite easy. In the views issue: 1. you can use preset saab view panel to move around quickly (walk around->internal->flashlight view) 2. or you can preset your own shortcuts using xplane quick views feature. I do have a quick view set to the cabin so i can handle cabin matters. I been on the saab 340 many times (My brother in law is a real life 340 pilot) and yes, you can take off on MIN configuration specially if conditions are given. You are not fully loaded, you are at or close to sea level, enough runway length, etc. But it is not recommended at all, because your climb rate reduces and if you miss an engine it will catch you too close to the ground. on the cargo door (walk around->pos9->cargo door view) you clic on the handlebar to rotate and unlock you clic centered on the door panel to open (it will lift up) you clic centered where the door panel should be behind fuselage and above to close it you clic the handlebar to lock edit: provided a reference for the saab preset view for the pax door operation

Problem is when you start cold& dark you must activate the audio speakers to hear the comms or radios. You have to perform the cockpit preparation by yourself. Also you should set all electricity up go to your captain's left hand side panel (below the left side window) and crank up the comm/nav audio sliders hope this helps. edit: if you have external hardware like saitek be sure your master +avionics is on

no problem here, imac + el capitan

this is simply impressive. congratulations!

It looks to me the weather conditions were overcast but because your draw cloud distance is at the minimum it is only rendering a tiny bit. Maybe the devs can comment on this. edit: misspelling

Yes, it is still there but given in hectopascal QNH 1013 (= 29.92 inches of mercurio) It seems you changed xplane language or units 1 hectopascal = 0.02953 inches of mercurio hope this helps

the trees are alive, truly impressive never seen this before. Love it. do you expect any performance hit having this features?

i can only use the sim over the weekends. if i am unable to activate smp then i have to wait an extra week.

any news?

you just install skymaxx pro on all of your computers and it will sync automatically. you have nothing to configure. slave computers use master weather info. i do have a dual imac setup running skymaxpro since v1

I also use USB key, it was working fine to me for a time. Suddenly the license stop working. Doing some research i found i had to install the drivers. I do not know why it worked before, once i installed them never had an issue again. so i would suggest you install them! it takes a second and it will not hurt. if you ckeck xplane site they ask to install the drivers to use the USB. http://www.x-plane.com/store/desktop/x-plane_10_home-use_usb_key/ drivers the HASP USB key drivers

this is not about skymaxx do you use cd or usb for xplane key? try reloading your mac, it looks like it unmounted. if you are running the usb key, be sure you have installed this from xplane.com. the HASP USB key drivers otherwise the usb key will not work properly

it looks to me you have not installed the entire world, but just a region. No matter you have a full license. note: by the way. You are having a FUEL CENTER LOW warning on the 777 EICAS. You should not activate center fuel pumps on the overhead panel unless you have loaded more than 63,000 kg of fuel which will require to load fuel on center tanks.

Is support collapsed? i been waiting a support ticket response for the whole day. My SMPXv3 does not activate, unable to use it.

on the x-aviation page go to 1. my account 2. my orders -> view the orders i have made 3. clic view for the top order in the list (should be skymaxx pro 3) 4. there should be a skymaxx pro3 hyperlink for downloading on the bottom page below Download links

thanks for the report, we are patiently awaiting for the ixeg classic 737

i had the same error, but if you clic reload on the navigator and go y¡to your orders the transaction went trough and you can download skymaxxpro3. I also received the paypal confirmation about the charge

skymaxxpro3 is coming :D new site, everything ready

I have installed the beta driver on my late 2013 imac, GTX780M intel 3.6 turbo 3.9. Horizon Artifacts are gone Performace seems to be just a few (2 to 4) fps better to me xplane 10.40rc3 yosemite 10.10.5

they look amazing, i want one of those. my saitek pedals are very imprecise and bumpy on transitions. by giving them more angle (agree, they seems to come way flat as per the picture), the heel doesn't catches the floor?