Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 02/16/2022 in Posts

  1. Graeme_77
    Issue solved, fix will be in next version."I've added a delay at boot before icing is applied. That should hopefully give enough time to any weather injector to come alive. I've also implemented historical METAR reading for the nearest station, which will give accurate temps and weather evolution. This mechanism is used if we detect that real weather has been configured by the user (either using X-Plane's weather, ASXP, xEnviro or XP-NOAA)."
    3 points
  2. Tom Stian
    Hi, Im sorry but i have no plans for that at the moment.
    2 points
  3. Graeme_77
    Issue solved, fix will be in next version. "I've added a delay at boot before icing is applied. That should hopefully give enough time to any weather injector to come alive. I've also implemented historical METAR reading for the nearest station, which will give accurate temps and weather evolution. This mechanism is used if we detect that real weather has been configured by the user (either using X-Plane's weather, ASXP, xEnviro or XP-NOAA)."
    1 point
  4. sunake
    Okay, thanks again for making this though! And thanks to toto for providing his voice.
    1 point
  5. mjrhealth
    depends on what ver xuipc you use , one does cause issues.
    1 point
  6. Pils
    Dataref name will be CL650/walkaround/standing
    1 point
  7. CaptCrash
    The aileron pcu jam can be triggered when you move the flight controls and there is some hyd pressure in the system but no pumps on. The simple fix is a power cycle of the aircraft to reset the jam sensor.
    1 point
  8. kecm80
    hi, in my case no, i tried to move surfaces whith hydraulic system off and wasn't able to replicate since i no longer see this "bug" one time it showed up after sps test, and pulling CB out did not resolved, got half corcle on both sides on time only left but sincerely can't remember when it lit on
    1 point
  9. sunake
    It probably happens because you moved the controls before hydraulic power is applied. I haven't experienced it yet but you can get rid of it by powering down the aircraft completely (the fms should save all its data for a little while). Or, you can try to pull and reset circuit breaker CB3-C6. I don't know if that will work but try it.
    1 point
  10. kecm80
    hi, take a look back, there are 2 other threads talking about the half circle, as far as i know it appears with no reason since in the failure menu ther was no active one, happend to me 2 times
    1 point
  11. Goran_M
    Navigraph are preparing a Hot Start navdata file for the CL650, and this will also be used in the TBM once we get around to updating it. Due to the impending 650 release, the TBM will be updated soon after the 650.
    1 point
×
×
  • Create New...