[SOLVED] ATS Fail

[Airspeed]

Ok, why do i get a flashing ATS Fail? As soon as i power the aircraft it start flashing FAIL and it wont stop. Been watching youtube for 4 hours now and not even once that thing flash Fail, it just a black panel until he clicks TOGA and it shows N1 TO, but not for me. 

Edited January 8, 2022 by SneakyDanish

[ois650]

3 minutes ago, Airspeed said:

Ok, why do i get a flashing ATS Fail? As soon as i power the aircraft it start flashing FAIL and it wont stop. Been watching youtube for 4 hours now and not even once that thing flash Fail, it just a black panel until he clicks TOGA and it shows N1 TO, but not for me. 

Hello,

The ATS will fail when you test the reversers as part of the normal procedures. When the annunciator says FAIL disconnect the ATS using the buttons on the back of the throttles (or a key binded to autothrottle disconnect). Then you may re-enable it by pressing TOGA.

Brgds

[Stevens]

I have a different problem. I have the ATS FAIL message always on the annunciator. I don't what I need to do. With this FAIL message I am not able to use ATS.

Ok. I got it . I need to do Autothrottle disconnect. Now it works. Thx.

Edited January 8, 2022 by Stevens

[chroode]

OK, I need "how to operate this for dummies".

Where is the TOGO button?

This ATIS thing is driving me nuts. 

[flamesies]

Hi Chroode,

Here's the buttons

[Stevens]

To be precise: The ATS FAIL light is now out on ground. But I cannot get ATS to work in flight. I push the ATS knob, nothing happens.

What do I have to do to make autothrust work?

[chroode]

51 minutes ago, flamsies said:

Here's the buttons

THANK YOU!!!!!!!

[chroode]

57 minutes ago, flamsies said:

Hi Chroode,

Hi,

I was able to clear the "FAIL" but it does not indicate "N1 TO" like it should. 

[Rastuasi]

Press the ATS button on dash @chroode

[chroode]

43 minutes ago, Rastuasi said:

Press the ATS button on dash

I got it working. I didn't have the AP engaged. 

Thank you

Chris

[Stevens]

I press ATS, but nothing happens.

I cannot get it on, no matter what

[chroode]

Unfortunately, I am STILL having problems with the ATS.

None of the buttons is making the N1 TO come on. 

I'm having some problems with the FLCH in the AP also.  

 

[Airspeed]

17 hours ago, oisintierney said:

Hello,

The ATS will fail when you test the reversers as part of the normal procedures. When the annunciator says FAIL disconnect the ATS using the buttons on the back of the throttles (or a key binded to autothrottle disconnect). Then you may re-enable it by pressing TOGA.

Brgds

Thank you! Now it works for me 

[ois650]

No problem - glad it's working for you. 

[Werner Rafteseth]

Deleted

Edited January 9, 2022 by Werner Rafteseth

[CanadianEagle]

 

ATS fail annunciator - can't extinguish it. It's on as soon as I fire up the APU generator at startup. I tried:
 

- Clearing the warning

- Engaging (arm) the ATS

- Engaging and disengaging A/P

- ATS disconnect and TOGA

 

 

[ois650]

8 hours ago, CanadianEagle said:

 

ATS fail annunciator - can't extinguish it. It's on as soon as I fire up the APU generator at startup. I tried:
 

- Clearing the warning

- Engaging (arm) the ATS

- Engaging and disengaging A/P

- ATS disconnect and TOGA

 

 

It won't arm because you've no takeoff N1 value. Enter the temperature in your thrust limit page and try again.

[MJ90]

I have the ATS FAIL caution message displayed. It’s the fusion. On the PFD it’s say FCM error. Do I need to input the temperature for ATS to work on the ground? Or is it a complete failure ?