Cameron Posted February 8, 2018 Report Share Posted February 8, 2018 (edited) Hello All, This will serve as a formal forum announcement that we have released the version 1.21 update for the Take Command! IXEG 737 Classic. All customers who have purchased the IXEG 737 Classic up till now have been sent an e-mail by X-Aviation with complete instructions on how to obtain your update. We have made this a very simple process! For those that purchase the IXEG 737 Classic from today forward, your purchased download will already be updated to version 1.21 for you. ======== This update is fully X-Plane 10 and 11 compatible. IMPORTANT As of IXEG v 1.21 the flight model is now updated to XP v 11.1. THIS MEANS THAT YOU NEED XP v 11.1 OR NEWER FOR THE IXEG v 1.21 AIRCRAFT TO PERFORM AS IN INTENDED! So, if you use - say - XP 11.05 with IXEG v1.21, you will probably experience trim issues, aircraft nose wanting to lift off to early on takeoff etc. And possibly other strange issues. So if you for some reason wan't/need to stick with XP v 11.05 or older, stick with IXEG v 1.20. ======== What if I didn't get the update e-mail? If you did not receive your update e-mail don't fret! X-Aviation has updated our system to allow all customers to update with ease, regardless of whether you received an e-mail for the update! Here's what to do: 1. Login to your X-Aviation account here: https://www.x-aviation.com/catalog/account_history.php 2. Find your original IXEG 737 Classic download and re-download the file. It will download as the latest version! The following is a list of additions/fixes included: What's New / Changed: Added reflective glass surfaces in cockpit for XP11 Added datarefs for autopilot modules Several bugs fixed to enhance stability of FMS Flight model is now updated to latest XP 11.10 standard. New downwash effects in XP11 (like mild nose-down effect when close to ground, as in reality) Enabled stick shaker sound again when near or below stall AOA Improvement to automatic go-around speed commands Improved cargo holds (lit at night, affect pressurization) Fixed standby-power logic Enabled Captain´s altimeter to work when powered by standby bus Stopped LNAV tracking when route is deleted Updates Gizmo to v18.01.02, tuned for consistent frame rates - roughly 10% faster As always, thanks for being a customer with X-Aviation. We appreciate your feedback and support! Enjoy these latest updates, and stay tuned to the forum as we continually announce the latest happenings. Edited February 8, 2018 by Morten 5 Link to comment Share on other sites More sharing options...
manchesterdc Posted February 8, 2018 Report Share Posted February 8, 2018 Hello, I can't seem to get the installer to download the files right now. The error I'm getting at the start of the download portion says "Unable to download component IXEG 737-300: Component file version does not match." Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 Just now, manchesterdc said: I can't seem to get the installer to download the files right now. The error I'm getting at the start of the download portion says "Unable to download component IXEG 737-300: Component file version does not match." I'll look into this. Tests on Windows here were successful. Looks like Windows 10? Link to comment Share on other sites More sharing options...
manchesterdc Posted February 8, 2018 Report Share Posted February 8, 2018 Just now, Cameron said: I'll look into this. Tests on Windows here were successful. Looks like Windows 10? Affirm. Windows 10 Pro Build 16299.214 (1709) Made a backup of my current 1.20 install, and moved it out of the simulator directory, but I tried moving it back and letting the installer uninstall it with the same result. Link to comment Share on other sites More sharing options...
kneighbour Posted February 8, 2018 Report Share Posted February 8, 2018 Same problem here on Windows 7 Link to comment Share on other sites More sharing options...
capto Posted February 8, 2018 Report Share Posted February 8, 2018 it happens just at the end of first component, windows 10 1709 Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 Okay, standby while I investigate. Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 Problem potentially identified. Testing a fix now. 70% sure about it. Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 SOLVED This affected a subset of Windows users. If you were one of the affected customers please delete the installer you have and re-download. 2 Link to comment Share on other sites More sharing options...
Skymatix Posted February 8, 2018 Report Share Posted February 8, 2018 Morning guys, It seems there is an issue with the installer of V1.21 Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 Link to comment Share on other sites More sharing options...
capto Posted February 8, 2018 Report Share Posted February 8, 2018 thank you, installed- 1 Link to comment Share on other sites More sharing options...
manchesterdc Posted February 8, 2018 Report Share Posted February 8, 2018 19 minutes ago, Cameron said: SOLVED This affected a subset of Windows users. If you were one of the affected customers please delete the installer you have and re-download. Much appreciated! 1 Link to comment Share on other sites More sharing options...
siege00 Posted February 8, 2018 Report Share Posted February 8, 2018 Thank you for the quick fix Cameron! Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 5 minutes ago, siege00 said: Thank you for the quick fix Cameron! Sure thing! 1 Link to comment Share on other sites More sharing options...
Freight Dawg Posted February 8, 2018 Report Share Posted February 8, 2018 Workin great on my end, anyway to open main doors? Link to comment Share on other sites More sharing options...
Cameron Posted February 8, 2018 Author Report Share Posted February 8, 2018 5 minutes ago, Freight Dawg said: Workin great on my end, anyway to open main doors? No, there is not. 1 Link to comment Share on other sites More sharing options...
Mobius12 Posted February 8, 2018 Report Share Posted February 8, 2018 Thanks for the update, however i still don't have the digital displays working during the day only appear when dark? I have done a complete reinstall of the aircraft. Link to comment Share on other sites More sharing options...
Litjan Posted February 8, 2018 Report Share Posted February 8, 2018 Just now, Mobius12 said: Thanks for the update, however i still don't have the digital displays working during the day only appear when dark? I have done a complete reinstall of the aircraft. This is an X-Plane fault with the VR beta and will be fixed with the next update to X-Plane. Jan Link to comment Share on other sites More sharing options...
Mobius12 Posted February 8, 2018 Report Share Posted February 8, 2018 Great, Thanks for the quick reply Link to comment Share on other sites More sharing options...
okernel Posted February 8, 2018 Report Share Posted February 8, 2018 All seems good on Mac. Successful Flight YBBN to YSSY. FPS no improvement on my machine, perhaps even a bit worse. No complaints though. Thanks 1 Link to comment Share on other sites More sharing options...
Antares_16 Posted February 8, 2018 Report Share Posted February 8, 2018 Thank you! Link to comment Share on other sites More sharing options...
Alphonso Posted February 8, 2018 Report Share Posted February 8, 2018 Happy to see that it didn't wipe my liveries or routes. I was sweating there for a while. I will be firing it up shortly. Link to comment Share on other sites More sharing options...
collimator79 Posted February 8, 2018 Report Share Posted February 8, 2018 Hello Cameron, I was having the same issue earlier, I followed your instruction to delete the installer and re-download it but this time it gives me another issue. Here is the screenshot! Link to comment Share on other sites More sharing options...
Litjan Posted February 8, 2018 Report Share Posted February 8, 2018 Cameron is sleeping right now - he will be able to look at stuff tomorrow. However - if windows is not giving you permission to access, this is most likely a problem on your end. Possibly try to run the process as administrator? Cheers, Jan Link to comment Share on other sites More sharing options...
Recommended Posts