Jump to content

leha74ru

Members
 View Profile  See their activity

  • Posts

    50

  • Joined

  • Last visited

 Content Type 

Everything posted by leha74ru

  1. leha74ru
    yes. it does not depend on range set
  2. leha74ru
  3. leha74ru
    compare the navigation databases on all fms (there should be the same active one) and weihgt fuel (PERF-PERF INIT)
  4. leha74ru
    there were no problems with GNSS before the update. now I constantly see messages in a circle GNSS NOT AVAILABLE -> GNSS REVERTERD
  5. leha74ru
    Will the IVAO client fix the same?
  6. leha74ru
    apparently slowly gaining altitude, TAT -55. decreased, but I have no idea how to revive the ATS
  7. leha74ru
    https://forums.x-pilot.com/forums/topic/22543-parking-brake-and-brakes-issue/#elControls_170300_menu
  8. leha74ru
    if you turn it on correctly and at least pump 3A is turned on, then everything works normally if no one answers, then when I'm near the simulator I'll write what commands are assigned to the buttons
  9. leha74ru
    up to 10000 the speed is higher than 250, it is generally in mach this is logical, you have two restrictions, one of the default profile is 250 and can withstand it because it is smaller
  10. leha74ru
    if there are no constrictions on the LEGS page in terms of speed, then it will decrease according to the default profile 0.8/250. You can add these speed/height limits on the LEGS page
  11. leha74ru
    by default, the following buttons, normal brakes "B", parking "V". hold down the regular brakes(B), then parking brake(V) after that both buttons can be released. the plane is on the parking brake
  12. leha74ru
  13. leha74ru
    значит что то сделал не так. после прописывания в host проверить доступность можно просто открыв браузер и в качестве адреса указать IP (да открывать файл с правами администратора)
  14. leha74ru
    Do I need to turn off the ATC or is it enough to turn on the reversals after landing?
  15. leha74ru
    it's still in the pack. Does not start if you do not close the pack. what am I doing wrong?
  16. leha74ru
    fuel weight difference. If you enter manually, then everything is fine. But if you select the “CALC FUEL” mode on FMS 1, then you need to do the same on the rest, otherwise there will be this difference
  17. leha74ru
    I realized my mistake, the pump is turned off to check the valve and should turn on again before starting the second one
  18. leha74ru
    after several flights, attempts to start the engine 1 after engine 2 by turning off the pumps do not lead to success. If I turn off the packs or leave the pump on, then everything is fine. maybe the packs need to be disabled? if you follow the checklist, it occurs twice to turn on the pack, but between them we do not turn them off anywhere
  19. leha74ru
    how to get back if you clicked and now there is VNAV PLAN SPEED
  20. leha74ru
    icing effect visually visible only with xEnvira? I left it overnight in the USSS. Snow, -29. I can't see visually
  21. leha74ru
  22. leha74ru
    what is the reason for this? no syncing? I enter data only in 1-st FMS
  23. leha74ru
    i input data only fms1, but calculated speeds are different. why?
×
×
  • Create New...