-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Latest X-Plane & Community News
Events
Downloads
Store
Everything posted by Jf17
-
The G1000 automatically changes to mach when the aircraft goes beyond 255 knots TAS. I am not quite sure about the specific speed number but it must be something around 255 knots.
-
I tried out a few airports and I tried to reproduce the issue: 1. I was able to reproduce the exact same issue on EDVE. I did the following: "Show chart" -> "Star" -> selection menu -> scrolled down ->Freeze 2. The same issue happened to me also on EDDM. I did the following: "Show chart" -> "DP" -> selection menu -> scrolled down ->Freeze 3. However on other airports happened nothing and I was able to select any chart without a freeze. On the following airports happened nothing: LFPG, EDDS. KBOS, EDDW, EDSB After the freezes on EDVE and EDDM I looked up the Tbm log and both times it said this: 2020-01-11 12:15:10 TBM900[helpers.c:1095]: Cannot stat D:\Universe Sandbox 2\steamapps\common\X-Plane 11\\Output\TBM900\charts.db\aeronav.faa.gov\1913: Zugriff verweigert TBM900_Log.txt
-
I actually can get out of the page after the freeze. I only have to push the inner knob of the FMS knob and then I can push "go back". However if I go to the charts page again it will still show me the freezed window. I think it happens randomly to different charts but I will test it out. I will post back the results in a short time.
-
Hello, The "charts" page of the Tbm suddenly freezed in the selecting menu (see image below) when I tried to select another chart. The same issue happened to me a few months ago but I forgot about it since I use the charts option rarely. There was no CTD and there were no further problems with the flight except for the charts page freezing. TBM900_Log.txt Log.txt
-
Same here. It's probably a bug.
-
Yes, I will post it to you immediately after the CTD. But it could take some time because these CTDS happen very random. As for now, thank you for helping me.
-
The log is not immediately after the CTD because after it crashed i restarted the sim to end my flight properly. After that I posted the log. You have to scroll up a bit to find the concerned line. That's the reason why I quoted. The date of the crash is 2019-12-23 08:17:29. That's the line I am refering to. I did turn off the AI traffic in advance to prevent a CTD like this. That's reason why I am so surprised with it. By the way, thank you for the info with the GPU drivers. I have updated them now. TBM900_Log.txt
-
I have it turned off and I don't use any specific traffic plugins. I don't know why it's happening anyway.
-
Hello, I want to inform you that the exception handler bug is still alive in 1.1.10. Shortly after takeoff the game suddenly freezed and crashed a few seconds later. When I looked inside the log.txt, It said this: "2019-12-23 08:17:29 TBM900[except.c:282]: Something reinstalled our exception handler, replaced it with 0000000000000000" I thought the new update was supposed to fix this issue but apparantly the bug still remains. TBM900_Log.txt Log.txt
-
Thank you for your response. I already asked about the issue on the Hot Start discord. Toto confirmed to me that this issue is a bug which is not on my side. I appreciate your hard work that you both are putting into this aircraft.
-
I did a clean reinstall of the airplane but it didn't fix the issue. Despite this issue the Tbm 900 is still a great airplane, so for now I will leave it like that. Maybe I will later delete the State folder but actually I don't want to lose my airframes.
-
Thank you for your advice. I will try reinstalling the Tbm in the next days and I will post back if it actually has fixed the issue.
-
I don't any have hardware controlling my avionics. I just use a normal Joystick for flying, that's all hardware I'm using for X-Plane. In addition to that I only use very few mods and scenery addons too. TBM900_Log.txt Log.txt
-
Actually I only wanted to land on a high elevation airport (10700 feet). But before landing the EDM kicked in because of a too high cabin altitude. I had to intervene here by pulling the yoke (Probably the "override" part). Otherwise the Tbm would have crashed into the mountains .
-
What does the red CAS message "EDM override" mean on the Tbm 900?
-
However the issue I am getting (only when pushing "Display Backup" ) is on Windows.
-
For this issue, a forum post has already been created. The devs are investigating the issue.
-
I also get screen issues with 1.1.10. Luckily it only happens to me when I push the "Display Backup" button and my tapes aren't gone. Notice that the speed on the MFD is 4 knots higher than the speed on the PFD.
-
Nothing will happen to your airframes. You will kepp them all.
-
Actually there is a radio altimeter. It's the green number that appears on the PFD when you are <2500 feet above ground level.
-
1. The sunshades are modelled but you can not see them from outside. 2. I don't get this issue. 3. They have reworked the Tbm's ground handling. 4. This also happens to me. But I don't know whether it's a bug on Laminar's side or Hot Start's side. Greetings.
-
Do you mean the Tbm 900? If s, then your cabin temperature is too high so you have to cool it down. Look in the ECS info for the cabin temeperature. You can cool down the Tbm's cabin by increasing the fan speed. Greetings.
-
I own three Addon aircraft in X-plane: The Aerobask Da 62, the FlightFactor A320 and the Hot Start Tbm 900. 99% of time in X-Plane I fly the Tbm 900 It's a great airplane! Greetings!
-
Hello there, I have run in some strange issue with the Emergency Locater Transmitter (E.L.T.). It has failed due to excessive wear, that is what the log text say. So I looked up my maintenance manager but I couldn't find anything being broken. I also looked up the "fail menu" saying that the E.L.T has been failed. I pushed "fix all" but the E.L.T. returned to be red. Do you know how the E.L.T mush have been failed and how I can make it work again? Kind regards. TBM900_Log.txt