flieger28

Yeah, i think at certain settings (RPM?) there is some kind of Doppler?effect happening I guess in this Video i filmed in 2008 at EDXN the "brutal" sound of the BN is obvious

My first observations Nice outside model of the plane Very stable in flight, you can trim it and it is flying. Corresponds with what i experienced, the one time i had the opportunity to be in control of an Islander. The sound after shutdown is perfect. The ticking of the engines. Great. Flap Sound is also very good in my opinion. Sounds are okay, but could improve, i guess. No tire sound when landing, also no ratteling sounds No landing light (at least not for me). No German livery (OFD, former OFD would be nice) Integration with FSE would be nice. In a way that when i load 2 passengers via FSE, 2 Passengers are shown in the cabin. (but that's only a nice to have one" And i really like the fact, that it seems that the developers "care" what the customers are saying. All in all i'm very pleased At least i heard the horn. But nothing fancy happening. And i guess that it's what it does in RL

The rotating Beacon is working. But to see it it should be evening. It is kind of dim. The landing lights are in fact not working.

Also i noticed that, landing on a gras strip i hear the tires make a sound, on the other hand on concrete i didn't hear anything.

Okay I guess I found my mistake. I turned both fuel pumps on and started the first engine. So I thing until I tried to start the second engine, I had it flooded. Waited some time, started right engine first, turned on left fuel pump an started left engine, without problems. don‘t know it that was the problem and if the flooding of the engine is implemented. in the landing checklist it says prop fine, that means full back, right before feather?

I started the left engine without any problem but can't get the right one to come alive. The starter turn's the prop but nothing happens then. Fuel pressure is up and indicating but the motor doesnt start. Yesterday it worked

I guess there are islander with and without noise canceling and also with different props. But in my memory there is a very distinctive engine Sound.

Sadly there is no Documentation within the folder. Also i noticed that the Landing Lights are very dim. In fact they make no difference in the dark. Will try again tomorrow. All in all it seems to be quite well. The Flap sound was quite familiar, to the ones i had the chance to be a passenger in. Also the Cockpit looks fantastic. Honestly there is a German BN missing in the liveries Great job, now i can go to sleep

yes maybe, but the Sign was showing already 2 hours before the 4pmEST time. Hard to imagine that it takes 5 hours to put a new product in the store. Maybe there are some last minute changes. Maybe it comes out with REALITY XP GTN 750/650 support right from the start. I need to be positive

So nearly 3 hours behind the estimate. So i guess it will take some time. Sad looked really forward to purchase it right away. So i have to wait. 0:45 here in Germany, so i think it's time to go sleeping

The 4pm EST is long gone, and nothing released until now

I also have now 2x SSAA + FXAA. And it seems better with b3 And i noticed that the beta seems not to like the fact when you change graphic settings during flight. Had a few CTD. When i set it beforehand, now Problem.

I figured out that it seems to be in conjunction with the Antialiasing. If i turn it of or only on the first notch it is way better. If i getting higher than the first notch it is getting worse Also tried to reset the 3d settings in the Nvidia control panel.

I tried without any plugins, same problem. I guess i will do a complete fresh install of x-plane and install everything one by one and see if its better.

And 2 Screenshot from the Plugin Admin

Here is a screenshot I tried different settings but it was all more or less the same. I also tried with and without X-PLane AI Planes, no difference.

Thanks that you will take a look. Attached the log.txt Also i made a short Video yesterday at the same Airport (SBSL) where you can see the stuttering. In other planes this stuttering is less or even not noticeable. Tried the FSDG Bremen Airport, which is much more demanding in terms of scenery. On that Airport the frames are somewhat lower put there is no stuttering. TBM at SBSL with stuttering Log.txt

I noticed that there is some kind of stuttering in 11.5 w Vulcan when i use the TBM with some airports. Funny think ist that stuttering ocurs even when the Frame rate ist high.

I thought that the TCAS needs the AI planes so the LT ones are displayed. So you say, if i have enabled LT (not checking TCAS controlled in LT) without AI planes in Xplane, they still show one the Tcas page of the TBM?

I think the scenery is not the problem. I did the exact same flight. Same route, same real world Weather with ASXP. And i was able to finish this flight. Only think i did was to restart my PC after the first CTD Attached the log of this flight Log.txt

The same happend to me right now. Did 4 flights without problems and today i got a CTD. No AI, Active Sky enabled. Flight was from BGBW to CYYR Attached my log Log.txt

Wouldn't it be a "workaround" to put the Fuel into a config file, before i start the sim? Maybe the Fuel state is given in the TBM900.acf. At least there is a section PROPERTIES_BEGIN P _cgpt/0/_name empty craft P _cgpt/0/_w_max 4581.200195312 P _cgpt/0/_w_now 4581.200195312 P _cgpt/0/_w_test 4581.204589844 P _cgpt/0/_z_ref 14.300000191 P _cgpt/1/_name fuel tank #1 P _cgpt/1/_w_max 1005.299987793 P _cgpt/1/_w_now 1005.300048828 P _cgpt/1/_w_test 0.0 P _cgpt/1/_z_ref 14.300000191 P _cgpt/10/_w_max 0.0 So it would be possible to make the Flight Planing after that insert the right amount of Fuel into the acf, and than the Fuel calculation should be correct. Or am I missing something?

No, I had live traffic and also X-Plane AI Aircraft disabled

Deactivated Livetraffic and was able to do the flight which yesterday crashed. However after the flight, engine off, i opened acelogbook. And another Crash AceAPI [ AceLogbook ]: Landing. AceAPI [ AceLogbook ]: Valid flight. AceAPI [ AceLogbook ]: Saving database: [X-PLANE]/acelogbook.csv 1:45:54.735 I/ATC: Airport flow changed at EHKD! CurFlow: AUTOGEN: West NewFlow: AUTOGEN: North 1:45:54.735 I/ATC: Changing EHKD CabState from 0 to 1 1:45:54.735 I/ATC: All departures are done at EHKD. Advancing... 1:45:54.735 I/ATC: Changing EHKD CabState from 1 to 2 1:45:54.735 I/ATC: All arrivals are done at EHKD. Advancing... 1:45:54.735 I/ATC: Changing EHKD CabState from 2 to 0 1:46:05.283 I/ATC: Airport flow changed at EHBD! CurFlow: ATC Flow Calm Winds 03 NewFlow: ATC Flow Severe Winds 03 1:46:05.283 I/ATC: Changing EHBD CabState from 0 to 1 1:46:05.283 I/ATC: All departures are done at EHBD. Advancing... 1:46:05.283 I/ATC: Changing EHBD CabState from 1 to 2 1:46:05.283 I/ATC: All arrivals are done at EHBD. Advancing... 1:46:05.283 I/ATC: Changing EHBD CabState from 2 to 0 1:46:17.485 I/ATC: Airport flow changed at EHEH! CurFlow: rwy 21 Flow under 5 kt NewFlow: rwy 03 Flow 1:46:17.485 I/ATC: Changing EHEH CabState from 0 to 1 1:46:17.485 I/ATC: All departures are done at EHEH. Advancing... 1:46:17.485 I/ATC: Changing EHEH CabState from 1 to 2 1:46:17.485 I/ATC: All arrivals are done at EHEH. Advancing... 1:46:17.485 I/ATC: Changing EHEH CabState from 2 to 0 2019-07-02 21:13:54 TBM900[elec.c:1202]: MAIN GEN tripped (25.1A, 28.2V, rpm: 0) 2019-07-02 21:16:18 TBM900[except.c:282]: Something reinstalled our exception handler, replaced it with 0000000000000000

Had yesterday also 2 CTD's The first one pointed towards my nvidia graphics driver. So i updated it. Flew same trip as before. This time the flight lasted longer, but in the long Final towards. Searched in the log for TBM Related errors Right at the beginning i found this, guess it points to the Charts feature? It say's Access denied Also a little later And at the end it looks like this Maybe the plugin LiveTraffic is the Problem? I Also use ASXP, but found nothing in the log at the time of the CTD Regards Log.txt