More Issues

[Wycliffe Barrett]

After reinstalling the IXEG 737 again the problem now is that I am having some issues with LSK on the FMC, predominantly LSK L2. 

This has not been one of the best install experiences. Lets hope third time is the charm.

Wycliffe

[Cameron]

2 hours ago, Wycliffe Barrett said:

After reinstalling the IXEG 737 again the problem now is that I am having some issues with LSK on the FMC, predominantly LSK L2. 

This has not been one of the best install experiences. Lets hope third time is the charm.

Wycliffe

Wycliffe,

If I came to you about your product and said "I am having some issues with LSK on the FMC, predominantly LSK L2", would you even know where to go with that, or would you ask me for more description?

[Wycliffe Barrett]

Sorry Cameron

Perhaps I made to many assumptions thinking that you or pilots would understand the acronyms I was using. I was specifically talking about the Line select Key on the FMC on the left hand side of the FMC. Line select Key Left handside Key 2 from the top. 

I have done a 3rd install and as I suggested it certainly was 3rd time is the charm and all seems to be working as it should and better. There is just the Better Pushback error which of course there is a workaround for which I will now initiate.

Wycliffe

[Litjan]

Let us know how that goes for you!

Cheers, Jan

 

[Wycliffe Barrett]

I have just tried to plan another flight and unfortunately the issue persists, I cannot program a flight plan as Line Select key left 2 will not function. It prevents me form inputting airways and then on the per init page I cannot input anything that requires that LSK. 

Any resolution on this will be most welcome. 

The workaround for Better push back works perfectly.

 

Wycliffe 

 

[tkyler]

Thx Wycliffe.  Rgr the Init page,   what is the other page(s) that LSK2 will not function on? 

-Tom

[Litjan]

I specifically tried LSK on my system after reading you had problems with it - and it works fine here. So not sure what is going on with that...is anyone else having a problem with it?

Cheers, Jan

 

[Hullu-poika]

Kein problem

[tkyler]

anyone who has this problem, pleast note in your post what FMS page you were on when you had the problem. It will speed our fixes.

Thx.

 

Edited May 31, 2020 by tkyler

[Wycliffe Barrett]

My issue is one the flight plan page. I will load up now and check all the FMC buttons as I feel sure its not just that one causing problems.

At the moment its making the plane unflyable for me as I cant input a plan.

Wycliffe

[Wycliffe Barrett]

Dont ask me why but I am in flight after taking off from EGFF and I am happy to report that all the Line select keys of the FMC are working, I have no idea why but it worked fine for the first time since the update.

[SkyFly]

1 hour ago, Wycliffe Barrett said:

Dont ask me why but I am in flight after taking off from EGFF and I am happy to report that all the Line select keys of the FMC are working, I have no idea why but it worked fine for the first time since the update.

Had the same problem. After a simple reload of the plane it worked again.

[Hullu-poika]

I also got a problem after installation of v.1.31 with stable GIZMO plugin. At some part of flight all left keys bacame inactive on the flight plan page (found it during departure procedure while were going to perform "direct to" procedure - that means at about 40-50 min of simulation time). No errors from GIZMO were reported. I was able to complete my flight with second CDU.

The log-file is attached. But my reply is thather for info then for investigation.

The most probably it will gone with aircraft reload.

Log.txt

[Litjan]

Quite a few "critical" plugins running on your installation (XPUIPC, etc.) - I would suggest disabling them to try if that helps, then add them back until you find the problematic one.

Jan