Cameron Posted May 21, 2016 Report Posted May 21, 2016 Captains, X-Aviation and IXEG are pleased to provide you a free upgrade to version 1.0.4 of the IXEG 737 Classic! Just like with our previous update, we will use the HotFix upgrade system here. Rather than going and re-downloading an entire aircraft package, or having to go through a full re-install process, we will be offering more immediate code changes through this delivery method. In short, it's quick, easy, and kind of fun! Please read below how to install this update! But first, here's what's in it...Version 1.0.4 introduces the following fixes: Ability to save routes. RTE page 1 whenever the following exists: 1.) departure airport, arrival airport, at least one enroute waypoint Multiple fixes for LNAV routing Reduced ‘bends’ in short legs Fixed several route “kinks” AirFMC now supported (requires v1.3.1 of iOS app and v4.5.1 of the X-Plane plugin) Flight recorder switch cover moves switch back to normal Several fixes for various soft crash issues Cabin control initialized to 24000 for all situations Engine driven Hydraulic pump switches initialize to ON Various fixes for the sound engine / sounds IDENT page shows correct AIRAC dates Cruise page formatting fixes Fix for refueling of center tank with engines/APU off Pressing TAKEOFF> prompt on some pages doesn’t go to the CLIMB page now Gyro sound spins down properly now after shutting off battery Consistent fuel values on aircraft load now Auto brake DISARM light illuminates when auto brake disengages during RTO Fire bell sound fix Fix for startup engine sounds playing sometime when they shouldn’t Gross Weight updating on the approach page now CG can be set on TAKEOFF page to calculate takeoff trim To upgrade your aircraft to version 1.0.4 please follow the below steps: Open X-Plane and the 737 Classic as your aircraft In the X-Plane menu bar at top, select Plugins > Gizmo64 > Windows > HotFix You will be asked to enter in your HotFix ID. Copy and paste in the following: fddc499dc8a7531e7e4c9cf43716e12b Click 'Update' Once it has downloaded and installed, click 'Reboot' and you'll be done! Thank you for all of your support! Blue Skies, X-Aviation 15
Javier1971 Posted May 21, 2016 Report Posted May 21, 2016 Thank you very much for the hard work accomplished. Sent from my LT30p using Tapatalk 1
crisk73 Posted May 21, 2016 Report Posted May 21, 2016 Thank you for the sweet awakening, your work and commitment is really appreciated. Have a nice weekend everyone! 1
jujub Posted May 21, 2016 Report Posted May 21, 2016 Thanks guys for a excellent aircraft and upgrade so simple to implement. Bob
ShaneMontoya Posted May 21, 2016 Report Posted May 21, 2016 Thank you IXEG team for this upgrade. Will try it next week to see if some of the strangely-drawn-sids/stars of Chinese airports get fixed. Again many thanks. Shane
jfim88 Posted May 21, 2016 Report Posted May 21, 2016 Thanks you team!!! Keep great work! Enviado desde mi iPhone utilizando Tapatalk
alexcolka Posted May 21, 2016 Report Posted May 21, 2016 Great thanks! More stable version. Sent from my Nexus 6 using Tapatalk
Carlosmanuel Posted May 21, 2016 Report Posted May 21, 2016 (edited) Good afternoon; First I congratulate you on your excellent work. I tell you that I have problems with the autopilot in this update. In order to keep it activated I have the command with the attitude of continually climb. If I leave at rest disconnected the autopilot and put the aircraft in descent mode. Please, if anyone has any clue what I'm not doing it correctly I beg you to help me. I think the trim do correctly. Thank you for your help Edited May 21, 2016 by Carlosmanuel
jcdawson Posted May 21, 2016 Report Posted May 21, 2016 (edited) I cannot update to 1.0.4. Every time I try I receive the error "Manifest data was invalid." This is the same issue I experienced with 1.0.3, which was never really resolved, but which I worked-around by re-downloading the latest installer from X-Aviation. Of course, that wasn't an ideal workaround, because I burned through a download unnecessarily. There are no extra spaces in the pasted key. Where can I go to open a support ticket for the Gizmo HotFix functionality? This forum doesn't seem like the right place, because my issue is a bit off topic (pertains to the HotFix functionality, not necessarily the 1.0.4 update), and because at this point I probably need the assistance of a Gizmo dev. Thanks, J Note: Support ticket automatically generated by emailing support@x-aviation.com; email confirmation with ticket number received. Edited May 21, 2016 by jcdawson Support ticket submitted 1
Cameron Posted May 21, 2016 Author Report Posted May 21, 2016 1 hour ago, Carlosmanuel said: I tell you that I have problems with the autopilot in this update. In order to keep it activated I have the command with the attitude of continually climb. If I leave at rest disconnected the autopilot and put the aircraft in descent mode. Please, if anyone has any clue what I'm not doing it correctly I beg you to help me. I think the trim do correctly. Thank you for your help Please use the support section of the IXEG forums.
Tom Knudsen Posted May 21, 2016 Report Posted May 21, 2016 Just wanted to say thank you to all the team, I know you been working hard 1
Tinamus Posted May 21, 2016 Report Posted May 21, 2016 Wow! Airfmc support is the bets thing you made in this hot fix I was waiting for it from the beginning because airfmc it's a must have for my home cockpit. thx you so much.
rdegle Posted May 21, 2016 Report Posted May 21, 2016 (edited) All the buttons work for the FMC on the IPAD, but no display on the screen. Inputs do show on the 737 FMC. I have the IXEG update and the most current plugin for Airfmc Edited May 21, 2016 by rdegle
Cameron Posted May 22, 2016 Author Report Posted May 22, 2016 8 hours ago, rdegle said: All the buttons work for the FMC on the IPAD, but no display on the screen. Inputs do show on the 737 FMC. I have the IXEG update and the most current plugin for Airfmc It absolutely does work. I have been using it on both Mac/PC with an iPad Pro and iPad Mini as test beds.
Yidahoo Posted May 22, 2016 Report Posted May 22, 2016 4 hours ago, Cameron said: It absolutely does work. I have been using it on both Mac/PC with an iPad Pro and iPad Mini as test beds. I am actually having the same problem using an iPad Mini 4 and the latest versions of the plugin and app. Buttons work, things get changed on the IXEG FMC but there is no visuals on the AirFMC. That was using Windows 10/IOS 9
Cameron Posted May 22, 2016 Author Report Posted May 22, 2016 6 hours ago, Yidahoo said: I am actually having the same problem using an iPad Mini 4 and the latest versions of the plugin and app. Buttons work, things get changed on the IXEG FMC but there is no visuals on the AirFMC. That was using Windows 10/IOS 9 I am running the exact same setup as you. No problems here. Obviously this isn't the place for support from AirFMC though. You'll need to contact the developer directly should you continue to have issues.
aculver Posted May 22, 2016 Report Posted May 22, 2016 21 hours ago, rdegle said: All the buttons work for the FMC on the IPAD, but no display on the screen. Inputs do show on the 737 FMC. I have the IXEG update and the most current plugin for Airfmc Working for me. By studying the slight delays, it looks like the app updates XP first then waits for XP to send the new screen info back to the app. If you are getting no screen updates on the app, it may be that the app is not getting data from XP at all. Check you network traffic for two-way data between AirFMC and XP.
rdegle Posted May 24, 2016 Report Posted May 24, 2016 Had to do a complete reinstall of 737, hotfix was not working. Airfmc works fine now.
Recommended Posts