Search the Community

PhotoSceneryX is a scenery development tool used to put photos of the real-world on top of the X-Plane default Global Scenery terrain. RealScenery uses PhotoSceneryX to produce its photorealistic scenery packages! Find out more at http://www.photosceneryx.com. Post your comments, questions, and suggestions here. Justin

Next Project - NZWN Wellington New Zealand Charlie has done some buildings and objects for this. I'll concentrate solely on doing the underlying orthos. I'll also try to keep this one XP9 friendly (using OpensceneryX stuff and no lighting/facades/buildings). I have 2 groups of images for this one: 1. General City Ortho at 2.5m This set covers everything - i.e the entire city is covered, all the way through the bay up to the Hutt valley 2. High-Res Airport-Only ortho at 0.1 meter Same resolution that NZCH was & I expect simmilar good results once TIF->PNG->DDS compressed Again, much ike NZCH, only the airport will be done in super-hi-res. (BTW, This Hi-Res Imagery cost me $50 or so just for that little airport section.. the entire city would be out of the question, $$ cost wise, hence the low-cost 2.5m for the rest of the city/valley). I expect this to be (once again) a free package. I will also post progress over the weeks. Go team! =) - CK.

File Name: CYYZ Toronto Pearson Airport File Submitter: chris k File Submitted: 18 May 2013 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 CYYZ Toronto Pearson Airport 1.20 July 27, 2014 Build Chris K and the ISDG __________________________________________________________ Preamble: This is a generally stable build with no library conflicts; and all areas should be drivable and flyable. The ILS may be a fraction off due to repositioning of the runways to their orthophoto corrected locations, and verified with another 3rd party. It is also currently lacking ATC taxi-flow. However, these omissions are not “showstoppers” per se. __________________________________________________________ General Features: - Photorealistic terrain at 30cm/pix resolution as per the USGS - Proper Taxi Signage (was never there in any previous version of the CYYZ apt.dat it would seem) - Recent CAP CYYZ Charts (SIDs/STARs/RWY Approaches) - Repositioned most field objects to match the orthos, accurate within 15 cm +/- - Fixed runway markings, blastpads, and the like to reflect reality - Gritty ground and orthophoto texture support - Replacement Glideslope towers - Runway Stop Bar / Guard Lighting System (this is for YYZatcboy Joe How’s this for accuracy! ) Each runway entrance is protected by a stop bar consisting of red in-set lights located at all taxi holding positions. This is the runway warning/occupancy indicator system in-use in Toronto, and will be familiar to most heavy metal pilots. - Build-out of industrial parks, Eglinton Ave E, Airport Road, Dixie Road, Brittania, Dixon Road, and the Hotel Strip - Various “Easter Eggs” with more to come in subsequent releases. (See if you can find the Tim Horton’s Coffee Shop!) __________________________________________________________ Notes on the Taxiways: There are two versions of the taxiways included in this package. 1. Normal taxiways shown (regular asphalt, visible, drivable) 2. Hidden taxiways (regular asphalt, not shown, but still drivable) - You can also turn off the taxiways (hide/show) by replacing the “.POL”files located in the “orthophotos/” directory. This will give the same effect as in our CYTZ Package; whereas the taxiways are only drawn as per the ortho, but with visible (XP generated) centre, edge, and-hold-line markings. - Assuming you have the VRAM to run in extreme (native texture) resolution, you can take advantage of the full photo-realistic ground effect. - Simply copy the appropriate files form the “/1 Hide Taxiways/” directory into the parent directory and overwrite the existing POLs. - To restore the regular (visible) taxiways, simply copy the contents of the “/2 Show Taxiways/” into the parent directory, overwriting the POLs. __________________________________________________________ Requirements: - X-Plane 10.20 or better - OpensceneryX 2.0 (http://opensceneryx.com/) - A Modern Video Card with MINIMUM 512Mb VRAM. - You will want to run this scenery at “Very High” or “Extreme” Texture Resolution. - X-Plane 10.20 64-bit and 2 Gb VRAM Video card is recommended for the Highest Texture resolutions. __________________________________________________________ Credits: Base Objects - Freeware FS2004 CYYZ Scenery: This is a direct 1:1 conversion of FS9 Scenery by: Howie Cassidy (kpdc2002@yahoo.ca) Version 1.0 from July 3 2007 As per the original LICENSE: Freeware for personal use only. No one is to reuse this work in scenery advertised as their own or to use this scenery in whole or in part for commercial gain. [Chris K's notes]: All FS2004 Objects, Textures, and Imagery included in this scenery are © Howie Cassidy. Under no circumstance am I (or anyone else) claiming ownership of said art assets. All Rights and associated Kudos go to Howie.! This package shall remain 100% Freeware to respect the original author's wishes. __________________________________________________________ This package uses the converted objects as per RickMTL's conversion from 2007. Used with Permission from Rick as the base layer. __________________________________________________________ Orthophotos © The United States Geological Survey The dataset is the 30cm/pixel US Canada Border HiRes Orthoimagery aka. USGS Dataset “US Canada Border – UTM Zone 16″ and “UTM Zone 17″ This Imagery is in the Public Domain as per: http://cumulus.cr.us…listofortho.php Copyrights and Credits USGS-authored or produced data and information are considered to be in the U.S. public domain. When using information from USGS information products (chrisk – which we are), publications, or Web sites, we ask that proper credit be given. Credit is provided by including the following citation: Credit: U.S. Geological Survey Department of the Interior/USGS The USGS home page is http://www.usgs.gov. __________________________________________________________ Legal: Scenery and 3D Object work copyright © 2012-2014 by the ISDG (International Scenery Development Group) All other derived materials are Copyright their respective rights holders, used with permission. You do not have to pay for this scenery. This scenery is Postcard-Ware. Please send us a postcard if you like the work! We’d love to hear from you. ISDG Group PO Box 892 North Sydney, NSW 2059 Australia Visit our website at http://isdg.com.au/ for all our scenery packages and add-ons. © 2012-2014 The International Scenery Development Group (ISDG) Click here to download this file

File Name: YSSY Sydney Kingsford Smith Intl (ISDG) File Submitter: chris k File Submitted: 05 Aug 2012 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 YSSY Sydney Kingsford Smith Intl (XP10) Sydney, Australia - v1.41 Aug 10, 2014 WARNING: Use at Your own Risk. We assume no responsibility for blown up power supplies or melting GPUs. Requirements: - X-Plane 10.20 (http://www.x-plane.com/) - OpensceneryX 2.0 (http://opensceneryx.com/) - Texture Compression ENABLED (else you'll blow X-Plane's 3.5Gb RAM Limit) This scenery runs around 860 Mb loaded at "extreme" resolution compressed w/X-Plane 10 Loaded. Uncompressed, and you're into 1.4-1.5 Gb, meaning you're dangerously close to crashing XP10_32bit - A Modern Video Card with MINIMUM 512Mb VRAM. This scenery fully runs at or around 512Mb of VRAM when loaded in XP10 with "very high". I highly suggest this setting for now until XP10_x64 - You will want to run this scenery at "very high" or "extreme" Texture Resolution, or else the effect is lost. Sorry to the users with 256Mb VRAM or less. This just isn't going to work out for you. Time to think of upgrading, since XP10 uses almost 300Mb all by itself, with nothing loaded. __________________________________________________________ SHUT DOWN EVERYTHING ELSE ON YOUR COMPUTER if you have a 512 Mb Video Card! You will need every ounce of VRAM in your card for this scenery! Kill any Web Browsers, Desktop Wall Paper, and anything that couple possibly use Video RAM.! - If you get some texture swap, look around a little bit at the beginning in all directions, and let it settle. - Go to External views as well, zoom far out and back in, X-Plane will start swapping out unused textures. - Go to rendering options, toggle between full-screen to windowed and back. For some reason, this also works for me to optimise the VRAM. __________________________________________________________ Credits: Many people have generously donated their time, skills, and objects. This could not have been done without them. - Ropeless (Many Many Many Many Photoshopped Tiles, Concrete Gables from YSCN - Thanks to the Doctor!) - Fenriz (Many Many Photoshopped Tiles) - SimmoW (Photoshopped Tiles) - GaryBKK (Various Shipping Containers, Container Crane) - Sethesus (Checkered Huts, Electrical Junction Boxes, YSSY Tower, Signage, Clutter) - HenryT (Checkered Huts, Clutter) - Nickster (Radio Mast, Radar Ball, Red shipping containers, dumpsters, diggers, bollards, Clutter) - Skyflyer (HungryJacks, Billboards, McDonalds, Signage, Clutter) - Laminar for the LOWI XP9 Buildings. - Nerarmap.com for the Orthophotography Imagery at 15cm resolution (free redistribution and derivation for noncommercial use) __________________________________________________________ Additional Files/Enhancements: I highly suggest using Jack's (FlyJSim's) "über-kewl" Asphalt replacement textures found here for proper runway effect: Hi-Res Replacement Asphalt Textures I also suggest the Vehicle Library Extension found here, and crank up the 'Number of Cars". Looks great! Vehicle Library Extension __________________________________________________________ Bugs/Todo: Still some stuff to do - I'm aware of them i.e: - Some Gate Markings/Centrelines aren't finished yet. - Certain Buildings are simply "stand ins" until we better XP10/OSX objects i.e. "Delta Hangar" should be Qantas Hangar, and "USPS Post Office" should be Australia POST. __________________________________________________________ License: This scenery is Dorito-ware. Meaning that if you like it, you are obligated to send us a bag of Cool Ranch Doritos. The Australians have never heard of this flavour, and it's impossible to purchase it here in Sydney. __________________________________________________________ Author's Notes: This Scenery took 5 Months of planning, editing, assembling, and a complete Team of like-minded dedicated people. I was very fortunate to have met and worked with an awesome and talented group of individuals on this project. My hats off to Ropeless, who was by far the most dedicated individual and "photoshopping-machine" on this project. =) Without his tireless work and encouragement, this project would have never gotten off the ground. This scenery is dedicated to the entire X-Plane Community. You know who you are =) © 2012-2014 chris k __________________________________________________________ P.S. You like Photoscenery? Try this one: NZCH Christchurch Airport Photo Scenery (XP10) Or this one: YSCN Camden Airport Photo Scenery (XP10) Click here to download this file

Good news.! I found some royalty-free 15cm geo-referenced orthophotos of Sydney Airport (YSSY). The Imagery is free under Creative Commons License and I can do pretty much anything with the imagery; except derive a revenue stream from it. =).. So Yup - this is going to be another freebie/labour of love. I will have to wait a bit for Laminar to re-cut the .DSF tile for Botany bay to get the water, but this is an overlay, so one can use it before and after the underlying .DSF is fixed. Ive gone over my limit here (30 Mb already of images ive uploaded), so i'll hotlink 'em for now. (hey admins? can I get some more? I try to keep my jpegs under 300k). - CK.

File Name: CYTZ Toronto Island Airport File Submitter: chris k File Submitted: 26 May 2013 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 CYTZ Toronto Island Airport Authors: CDN 791M and Chris K of the International Scenery Development Group (ISDG) Version 1.0 - Jun 25, 2013 __________________________________________________________ Features: - USGS 30cm/pix Hi-res Orthophotos. - An Updated Toronto City Centre (Billy Bishop) Airport by CDN791M (Ed). - FreddyV's CN Tower Replacement Object (credits below) - Extensive buildout of Toronto Island and Surrounding Environs (Ontario Place, Christie Spit, etc) - Additional Toronto Downtown Buildings in various locations using the XP10 Art Library. Note: this is a 100% original work for XP10 - and should not detract from Pachett's excellent CYTZ for v9/v10. __________________________________________________________ Requirements: - X-Plane 10.20 or Better (http://www.x-plane.com/) - OpensceneryX 2.0 (http://opensceneryx.com/) - A Modern Video Card with MINIMUM 512Mb VRAM. - You will want to run this scenery at "very high" or "extreme" Texture Resolution. - X-Plane 64-bit and 1 Gb VRAM Video card is recommended for the Higher Texture resolutions. __________________________________________________________ Complimentary packages (i.e. Where is The Rest of Toronto!?!?) You should *also* install the following: CYYZ Toronto Pearson Airport X-Pilot: http://forums.x-pilot.com/files/file/471-cyyz-toronto-pearson-airport/ Jacques Brault - Toronto Skyline: X-P.org: http://forums.x-plane.org/index.php?app=downloads&showfile=17619 1. Copy Jacques' Package into your /Custom Scenery/ 2. Inside our "CYTZ Toronto Island Airport" package is a folder called "Skyline Package - Night Lighting Textures". 3. Copy in those additional textures (courtesy of ILMARS) to Jacque's Skyline Package's /objects/ directory. This will give you night textures for the buildings. Once done: 4. Edit your /Custom Scenery/scenery.ini file to manually position our package at the top of the .ini file Ensure that our scenery (CYTZ Toronto Island Airport) is before Jacques (zCanada CYTZ Island ON) package in the list. Your scenery_pack.ini should look something like this: I1000 versionSCENERYSCENERY_PACK Custom Scenery/CYTZ Toronto Island Airport/SCENERY_PACK Custom Scenery/CYYZ Toronto Pearson/SCENERY_PACK Custom Scenery/zCanada CYTZ Toronto Island ON/...... other stuff... (Note: If you don't feel like mucking about with an .ini file - simply delete your personal /Custom Scenery/scenery_packs.ini file, and due to alphabetical order on reload, the load order ends up putting the packages in the correct order). Upon reload of X-Plane, this scenery then merges with Jacques' excellent Toronto Skyline. Due to the way the X-Plane does object overlays, the two scenery packages blend into one seamless scenery, with full day and night lighting effects. __________________________________________________________ Additional stuff you should have: Marginal - Animated Sea Traffic: X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=17026 FlyingJackal/FlyJSim - Asphalt Runways Enhanced HD X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=16270 Sabach's "HD Environment X" - Replacement Sea/Sky/Cloud/Moon/Smoke Effects X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=18582 ISDG - Wide Taxiway Markings: X-Pilot: http://forums.x-pilot.com/files/file/406-wide-taxiway-markings-library-replacement/ X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=18490 ISDG - Replacement Day and Night Lighting: X-Pilot: http://forums.x-pilot.com/files/file/435-replacement-day-and-night-lighting-lightstxt-for-x-plane-1020/ X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=18742 ISDG - Vehicle Library Extension: X-Pilot: http://forums.x-pilot.com/files/file/125-additional-vehicle-library-extension-xp9xp10-isdg/ X-P.Org: http://forums.x-plane.org/index.php?app=downloads&showfile=16812 __________________________________________________________ Credits: Orthophotos courtesy of the United States Geological Survey (USGS) The dataset is the 30cm/pixel US Canada Border HiRes Orthoimagery aka. USGS Dataset "US Canada Border - UTM Zone 16" and "UTM Zone 17" This Imagery is in the Public Domain as per: http://cumulus.cr.usgs.gov/listofortho.php Copyright USGS-authored or produced data and information are considered to be in the U.S. public domain. When using information from USGS information products. publications, or Web sites, we ask that proper credit be given. Credit is provided by including the following citation: Credit: U.S. Geological Survey Department of the Interior/USGS The USGS home page is http://www.usgs.gov. __________________________________________________________ Base Object - CN Tower: CN Tower v2.0 by FreddyV http://forums.x-plane.org/index.php?app=downloads&showfile=17785 Used with enthusiastic permission from Freddy Original PNG Texture changed to use Compressed DDS DXT1 instead. Thanks Freddy!! Your CN Tower is awesome, and is the centrepiece of this entire scenery __________________________________________________________ Chris Noe & Mr 3D - Flags of the World: Real Flag II http://forums.x-plane.org/index.php?app=downloads&showfile=17090 Used with implied permission via Chris' description:".....to place in any scenery of your choice." (Mr Noe: Let me know if my inclusion here breaks your fair-use clause). Original PNG Texture changed to use Compressed DDS DXT1 instead. __________________________________________________________ Various credits: Custom Objects & Airport construction: CDN 791M Various Landmark Buildings: Chris K (localobjects/ISDG) Lighting: Ropeless (ISDGLibrary) Forests: Andras Fabian (ISDGLibrary) Field Clutter: HenryT, Sethesus (ISDGLibrary) Q400 Static Aircraft: Riviere Porter, AC Express Paints: Patchett Toronto Skyline LIT Textures: ilmars If we've forgotten anyone here - Please contact us for either credit or removal __________________________________________________________ © 2012-2013 CDN791M and the International Scenery Development Group (ISDG) Note: This is an X-Plane 10 ONLY Scenery - Sorry Peter Click here to download this file

File Name: German traffic library File Submitter: uwespeed File Submitted: 19 May 2013 File Category: Misc Scenery Resources X-Plane Version(s): X-Plane 10 Installation: as usual, place the content of the downloaded zip file into your Custom Scenery folder before starting X-Plane. You will see the vehicles (only) on german roads and rails. Nevertheless, if you like them and want to have them worldwide, please read the included pdf. If you like to have more european (and thus german) traffic on your roads, download the Vehicle Library Extension, to which I contributed 15 european vehicles. Click here to download this file

File Name: YPPF Parafield Airport and Adelaide City Photoreal File Submitter: chris k File Submitted: 09 Mar 2013 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 YPPF Parafield Airport and Adelaide City Photoreal Version 1.1 Update Mar 09, 2013 The International Scenery Development Group (ISDG) __________________________________________________________ 1.1 Update: - Made city replacement terrain files "less green" by tightening the shrub overlay textures. - Added night _LIT textures to the city; hence nighttime flying now looks like XP9 rather than completely dark. - Fixed an over-sized DDS Texture - This scenery now loads in XP9 via the Compatibility Library. XP9 Users, you can download : http://forums.x-pilot.com/index.php/files/file/327-x-plane-10-compatibility-library-for-x-plane-9/ __________________________________________________________ Requirements: - X-Plane 10.20 or better - OpensceneryX 2.0 (http://opensceneryx.com/) - A Modern Video Card with minimum 512 Mb VRAM, 1 Gb is highly recommended - Ability to run at "Very High" texture resolutions (with compression enabled), else the effect is lost. - X-Plane 64-bit and a 2 Gb VRAM Video card is recommended for the Highest Texture resolutions. (No... We're not kidding... we will use every ounce of VRAM you have!) __________________________________________________________ Installation: Unzip and place folder "YPPF Parafield Airport and Adelaide City Photoreal" in your X-Plane/Custom Scenery/ folder. - If VOZ is installed, then "YPPF Parafield Airport and Adelaide City Photoreal" must come before VOZ in the "scenery_packs.ini" file. - If you are installing this for the first time, this scenery will automatically be placed first (which is correct, and will work immediately) Uninstall: Delete the "YPPF Parafield Airport and Adelaide City Photoreal" directory from your X-Plane/Custom Scenery/ folder. __________________________________________________________ Custom Features of this Scenery Package: - Photorealistic terrain at 15cm/pix resolution - Hi-Res Australian-Style Urban Texture Replacements - Complete Customized Adelaide City Downtown (CBD) buildings and parks - Current Airport Taxiways, Tarmac, Markings, and Signage - Custom 3D Control Towers and Field Support buildings - X-Plane 10 Compliant ATC/AI Taxi Flow System - Airport grounds modelled via XP10 Library and Customized 3D Objects - HDR Lighting Support with Custom HDR Lights - Windsocks - Australian Style coloured windsocks, with HDR lighting - Regional Hangars and Localized Signage - Field Obstacles, Gables, and Bollards - Forests, Trees, Vegetation, and Grass - Advertising and Billboard Signage - Full Downtown Adelaide (CBD) Buildings - "Gritty" Texture Support - Lumber and 6 Restaurants just a short drive away - This time there's a map of the grounds included.... see if you can find it! __________________________________________________________ Credits: Project Lead : Ropeless Lead 3D Modeller : Sethesus Misc 3D Models : Ropeless, Skyflyer, AndrooC, Chris K Placements : Ropelss, Skyflyer, Chris K Taxiways : Ropeless Taxi Signage : Ropeless, Chris K Tarmac Stencilling : Skyflyer Vegetation : Ropeless, Chris K City Textures : Chris K City Skyline : Skyflyer, Ropeless HDR Lighting : Ropeless, Chris K Moral Support : Everyone else! __________________________________________________________ Hang on, Who are these crazy scenery guys? Ropeless - Orthophoto Guru, WED & ATC Taxi Flow Master, HDR Lighting Overlord, and Photoshopping Machine. SkyFlyer - Photoshopping, 3D Signage and Modelling, Stenciller, and our Local "Man on the Ground" again! Sethesus - Lead 3D Modeller, Textures, and spits out Incredible objects faster than we can ask for them. Karingka - 3D Modeller, WED Manipulator, Textures, FS-Conversions, Encouragement. AndrooC - 3D Modeller, Textures, Sketchup Object Weaver, johnny-on-the-spot. Chris K - WED Addict, Taxiway Paver, Object Rotator, Scenery Assembler, X-Grinder, Gardener. __________________________________________________________ Derived Object and Scenery Credits: - Barry (Baz) Roberts: Original VOZ/AussiePak Objects - Retrofitted for XP10, re-textured, and HDR Enabled - Nearmap.com: Orthophotos under Free Derivative Creative Commons License (CC-SA) - Hypersonic Test Pilot: Guardrail objects and facades, used with permission. - Nickster: Radio Masts/Towers. Free derivation of any objects for use in scenery as per his note. See ISDGLibrary/objects/towers/radio/License - Original Author.txt If we have forgotten anyone for objects not credited, please contact for inclusion or removal. ISDGLibrary/Forests/tree_textures: Copyrights are owned by Andras Fabian, Albert Laubi, and Laminar Research. They are used unmodified with permission of Andras Fabian. See ISDGLibrary/Forests/tree_textures/README.txt ISDGLibrary/Objects/windsocks: Thecustom windsocks are modified X-Plane resources with copyrights owned by Laminar Research. These objects cannot be sold or used with any flight simulator apart from X-Plane. See ISDGLibrary/Objects/windsocks/README.txt ISDGLibrary/Forests/grass: Contains material produced by "Simon W.". Used under the license implied in: ISDGLibrary/Forests/grass/How to grow grass.pdf ISDGLibrary/Objects/vehicles: Car and truck objects sourced from "Vehicle Library Extension" Used with permission from Jeff M. (Joyfulsongsters) and Cami de Bellis. See ISDGLibrary/Objects/vehicles/README.txt __________________________________________________________ Synergies This scenery is designed to work best with: YPAD Adelaide Airport Photoreal - http://forums.x-pilot.com/index.php/files/file/432-ypad-adelaide-airport-photoreal-xp10/ Glenelg South Australia Photoreal - http://forums.x-pilot.com/index.php/files/file/345-glenelg-south-australia-near-ypad/ Vehicle Library Extension - http://forums.x-pilot.com/index.php/files/file/125-additional-vehicle-library-extension-xp9xp10-isdg/ FlyJSim Asphalt Textures - http://forums.x-plane.org/index.php?app=downloads&showfile=16270 Wide Taxiway Marking Replacements - http://forums.x-pilot.com/index.php/files/file/406-wide-taxiway-markings-library-replacement/ SkyMAXX sky colouring using "Vivid Skies" - http://forums.x-plane.org/index.php?app=downloads&showfile=15821 BeachMAXX Ocean Textures - http://forums.x-plane.org/index.php?app=downloads&showfile=17311 __________________________________________________________ Reference Materials Visual Pilot Guide for Parafield can be found on the CASA website: http://casa.gov.au/wcmswr/_assets/main/pilots/download/parafield.pdf ERSA entry for the airport at: http://www.airservicesaustralia.com/aip/current/ersa/FAC_YPPF_15-Nov-2012.pdf IFR Charts for the airport at: http://www.airservicesaustralia.com/aip/current/dap/AeroProcChartsTOC.htm#P Google maps for the area at: http://maps.google.com.au/maps?ll=-34.793788,138.632526&spn=0.042291,0.055017&z=14 Wikipedia entry for the airport is at: http://en.wikipedia.org/wiki/Parafield_Airport __________________________________________________________ Legal: Scenery and 3D Object work copyright © 2012-2013 by the ISDG (International Scenery Development Group) All other derived materials are Copyright their respective rights holders, used with permission. You do not have to pay for this scenery. This scenery is Postcard-Ware. Please send us a postcard if you like the work! We'd love to hear from you. ISDG Group PO Box 892 North Sydney, NSW 2059 Australia ....We still haven't received a single postcard for YPAD.... C'mon guys..! __________________________________________________________ Contact us @ x-plane.org chris k ropeless skyflyer sethesus karingka androoc __________________________________________________________ Other ISDG Group Member Sceneries: YSSY Sydney Australia - http://forums.x-pilot.com/index.php/files/file/78-yssy-sydney-australia-airport-photo-scenery-xp10/ YPAD Adelaide Australia - http://forums.x-pilot.com/index.php/files/file/432-ypad-adelaide-airport-photoreal-xp10/ YSCN Camden Australia - http://forums.x-plane.org/index.php?app=downloads&showfile=14867 NZCH Christchurch NZ - http://forums.x-pilot.com/index.php/files/file/122-nzch-christchurch-airport-photo-scenery-xp10-isdg/ KPDX Portland OR USA - http://forums.x-plane.org/index.php?app=downloads&showfile=11248 KRMN Stafford VA USA - http://forums.x-plane.org/index.php?app=downloads&showfile=15638 KSEA Seattle WA USA - http://forums.x-pilot.com/index.php/files/file/321-ksea-seattle-photoreal-underlay/ KBOS Boston MA USA - http://forums.x-plane.org/index.php?app=downloads&showfile=15851 CYTZ Toronto Island ON - http://forums.x-pilot.com/index.php/files/file/301-cytz-toronto-island-airport-and-downtown-toronto-xp10/ __________________________________________________________ Hope you Enjoy! - The ISDG Team Click here to download this file

File Name: YPAD Adelaide Airport Photoreal (XP10) File Submitter: chris k File Submitted: 04 Mar 2013 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 YPAD Adelaide Australia Airport Photoreal (XP10) Version 1.31 Release Mar 04, 2013 __________________________________________________________ Features: Photorealistic terrain at 15cm/pix resolution Accurately modelled Taxiways, Tarmac, Markings, and Signage Accurately modelled Control Towers and Field Support buildings Complete X-Plane 10 Compliant ATC/AI Taxi Flow System Accurately Modelled Airport grounds and 3D Object placement Customized HDR Lighting w/accurate light-stand models and positions Customized HDR Lit Windsocks for landing visibility Customized Terminal Entrance and Passenger drop-off zone Signage Customized Gate Number Lighting Customized Hangars and Localised Signage Customized Runway Hold-Short Lighting Animated Jetways and Autogate DGS System Animated Terminal Doppler Radar Animated Service Vehicles Accurate Field Obstacles, Gables, and Bollards Custom Forests, Trees, Vegetation, Grass, and Reeds Customized (Non-Autogen) Terminal Roadway Lighting Current Advertising and Billboard Signage Custom vehicles, parking lots, and associated vehicle HDR lighting Accurate Helipads, Lighting, Markings, and Training Areas Full "Gritty" Texture Support ....And most important... 4 Different Restaurants to Choose From! (See if you can find them all) __________________________________________________________ New in 1.1: Added Marginal's Amazing New Animated Glass Jetways (Autogate). Get The Plugin here: http://forums.x-plane.org/index.php?app=downloads&showfile=5038 Now with full x86_64 bit support Removed AWSS Tower and Field Grass due to FPS Issues with some users Added Some additional Exclusion zones on RWY 05 Approach Removed CBD Buildings (to make way for another ISDG scenery package which includes a much better CBD; coming soon...) __________________________________________________________ New in 1.2: Removed artifact on orthophoto (Tile 12-6 near terminal gate). Refactored ISDGLibrary __________________________________________________________ New in 1.31: New taxiway and runway edge grass; Gives a nice soft touch to the scenery. Replaced Windsocks with Australian Style Windsocks w/HDR Lighting. Added new Long Grass and Reed Areas via Facades; Little-to-no FPS Impact. Added Yellow Warning lighting in key ares (Incursion Hotspots as per AIP) Added guidance markers for main tarmac/ramp entrance/exit areas Updated ISDG Library Updated Autogate 1.40 (with LIT night textures) __________________________________________________________ Scenery and 3D Object work: Copyright © 2012-2013 by the ISDG (International Scenery Development Group) All other derived materials are Copyright their respective rights holders, used with permission. __________________________________________________________ Who Are We: Ropeless - Orthophoto Guru, ATC Taxi Flow Master, HDR Lighting Overlord, and Photoshopping Machine. SkyFlyer - Photoshopping, 3D Signage and Modelling, Stenciller, and our Local "Man on the Ground" who owns a nice camera. Sethesus - 3D Modeller, Animations, and Johnny-on-the-spot for most of the custom objects you see. Chris K - WED Addict, Taxiway paver, Object Rotator, Scenery Assembler, Gardener. __________________________________________________________ Derived Object and Scenery Credits: - Barry (Baz) Roberts: Original AussiePak1 Objects fixed for XP10 and re-textured - GaryBKK (Gary): Containers and Ships - Nearmap.com: Orthophotos under Free Derivative Creative Commons Licence ISDGLibrary/Forests/tree_textures: Copyrights are owned by Andras Fabian, Albert Laubi, and Laminar Research. They are used unmodified with permission of Andras Fabian. See ISDGLibrary/Forests/tree_textures/README.txt ISDGLibrary/Forests/grass: Contains material produced by "Simon W.". Used under the licence implied in: ISDGLibrary/Forests/grass/How to grow grass.pdf ISDGLibrary/Objects/vehicles: Car and truck objects sourced from "Vehicle Library Extension" http://forums.x-plane.org/index.php?app=downloads&showfile=16812. Also in "New auto traffic" http://forums.x-plane.org/index.php?app=downloads&showfile=15244. Used with permission from Jeff M. (Joyfulsongsters) and Cami de Bellis. See ISDGLibrary/Objects/vehicles/README.txt __________________________________________________________ Requirements: - X-Plane 10.20 or better We know the art library in the 10.20 beta runs may change, if it does, we'll issue a fix. - OpensceneryX 2.0 (http://opensceneryx.com/) - A Modern Video Card with MINIMUM 512Mb VRAM. This scenery (Plus X-Plane 10) use ~500 Mb of VRAM when loaded at "very high" with compression enabled. - You will want to run this scenery at "very high" or "extreme" Texture Resolution. - X-Plane 10.20 64-bit and 1 Gb VRAM Video card is recommended for the Higher Texture resolutions. - Charts for YPAD: http://www.airservicesaustralia.com/aip/aip.asp __________________________________________________________ This scenery is designed to work best with: Vehicle Library Extension (http://forums.x-pilot.com/index.php/files/file/125-additional-vehicle-library-extension-xp9xp10-isdg/) FlyJSim Asphalt Textures (http://forums.x-plane.org/index.php?app=downloads&showfile=16270) SkyMAXX sky colouring using "Vivid Skies" (http://forums.x-plane.org/index.php?app=downloads&showfile=15821) BeachMAXX Ocean Textures (http://forums.x-plane.org/index.php?app=downloads&showfile=17311) Autogate DGS System (http://forums.x-plane.org/index.php?app=downloads&showfile=5038) Wide Taxiway Markings (http://forums.x-plane.org/index.php?app=downloads&showfile=18490) __________________________________________________________ Still to fix: - Some buildings are still a little too "glow in the dark" at night. These are converts from AussiePak1 which were toned down, but could use some HDR lighting instead of _LIT. __________________________________________________________ License: This scenery is Postcard-Ware. Send us a postcard if you like the work! We'd love to hear from you. See the included README.RTF for our address. __________________________________________________________ Contact us anytime: chris k ropeless skyflyer sethesus karingka __________________________________________________________ Other ISDG Group Member's Sceneries: YSSY Sydney Australia - http://forums.x-plane.org/index.php?app=downloads&showfile=16986 YSCN Camden Australia - http://forums.x-plane.org/index.php?app=downloads&showfile=14867 NZCH Christchurch NZ - http://forums.x-plane.org/index.php?app=downloads&showfile=15673 KPDX Portland OR USA - http://forums.x-plane.org/index.php?app=downloads&showfile=11248 KRMN Stafford VA USA - http://forums.x-plane.org/index.php?app=downloads&showfile=15638 Glenelg, South Australia - http://forums.x-plane.org/index.php?app=downloads&showfile=18226 KSEA Seattle WA, USA - http://forums.x-plane.org/index.php?app=downloads&showfile=18147 KBOS Boston, MA, USA - http://forums.x-plane.org/index.php?app=downloads&showfile=15851 __________________________________________________________ Copyright © 2012-2013 by the ISDG (International Scenery Development Group) (Note: We seem to have lost the previous file page here at x-pilot; hence the re-upload as a new file) Click here to download this file

File Name: YPAD Adelaide Airport Photoreal (XP10) File Submitter: chris k File Submitted: 30 Nov 2012 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 YPAD Adelaide Airport Photoreal Scenery (XP10) Version 1.3 Release Mar 03, 2013 __________________________________________________________ Features: Photo-realistic terrain at 15cm/pix resolution Accurately modeled Taxiways, Tarmac, Markings, and Signage Accurately modeled Control Towers and Field Support buildings Complete X-Plane 10 Compliant ATC/AI Taxi Flow System Accurately Modeled Airport grounds and 3D Object placement Customized HDR Lighting w/accurate light-stand models and positions Customized HDR Lit Windsocks for landing visibility Customized Terminal Entrance and Passenger drop-off zone Signage Customized Gate Number Lighting Customized Hangars and Localized Signage Customized Runway Hold-Short Lighting Animated Jetways and Autogate DGS System (xp10_32bit only for now) Animated Terminal Doppler Radar Animated Service Vehicles Accurate Field Obstacles, Gables, and Bollards Custom Forests, Trees, Vegetation, Grass, and Reeds Customized (Non-Autogen) Terminal Roadway Lighting Current Advertising and Billboard Signage Downtown Adelaide (CBD) Buildings Custom vehicles, parking lots, and associated vehicle HDR lighting Accurate Helipads, Lighting, Markings, and Training Areas Full "Gritty" Texture Support And most important... 4 Different Restaurants to Choose From! (See if you can find them all) _________________________________________________________ New in 1.2: Removed artifact on orthophoto (Tile 12-6 near terminal gate). Refactored ISDGLibrary __________________________________________________________ New in 1.3: New taxiway and runway edge grass; Gives a nice soft touch to the scenery. Replaced Windsocks with Australian Style Windsocks w/HDR Lighting. Added new Long Grass and Reed Areas via Facades; Little-to-no FPS Impact. Added Yellow Warning lighting in key ares (Incursion Hotspots as per AIP) Added guidance markers for main tarmac/ramp entrance/exit areas Updated ISDG Library Updated Autogate 1.40 (with LIT night textures) __________________________________________________________ Scenery and 3D Object work: Copyright © 2012-2013 by the ISDG (International Scenery Development Group) All other derived materials are Copyright their respective rights holders, used with permission. __________________________________________________________ Who Are We: Ropeless - Orthophoto Guru, ATC Taxi Flow Master, HDR Lighting Overlord, and Photoshopping Machine. SkyFlyer - Photoshopping, 3D Signage and Modelling, Stenciller, and our Local "Man on the Ground" who owns a nice camera. Sethesus - 3D Modeller, Animations, and Johnny-on-the-spot for most of the custom objects you see. Chris K - WED Addict, Taxiway paver, Object Rotator, Scenery Assembler, Gardener. __________________________________________________________ Derived Object and Scenery Credits: - Barry (Baz) Roberts: Original AussiePak1 Objects fixed for XP10 and re-textured - GaryBKK (Gary): Containers and Ships - Walterblenny (Al): AWSS Tower - Nearmap.com: Orthophotos under Free Derivative Creative Commons Licence ISDGLibrary/Forests/tree_textures: Copyrights are owned by Andras Fabian, Albert Laubi, and Laminar Research. They are used unmodified with permission of Andras Fabian. See ISDGLibrary/Forests/tree_textures/README.txt ISDGLibrary/Forests/grass: Contains material produced by "Simon W.". Used under the licence implied in: ISDGLibrary/Forests/grass/How to grow grass.pdf ISDGLibrary/Objects/vehicles: Car and truck objects sourced from "Vehicle Library Extension" http://forums.x-plan...showfile=16812. Also in "New auto traffic" http://forums.x-plan...showfile=15244. Used with permission from Jeff M. (Joyfulsongsters) and Cami de Bellis. See ISDGLibrary/Objects/vehicles/README.txt __________________________________________________________ Requirements: - X-Plane 10.20 or better (http://wiki.x-plane.com/beta) We know the art library in the 10.20 beta runs may change, if it does, we'll issue a fix. - OpensceneryX 2.0 (http://opensceneryx.com/) - A Modern Video Card with MINIMUM 512Mb VRAM. This scenery (Plus X-Plane 10) use ~500 Mb of VRAM when loaded at "very high" with compression enabled. - You will want to run this scenery at "very high" or "extreme" Texture Resolution. - X-Plane 10.20 64-bit and 1 Gb VRAM Video card is recommended for the Higher Texture resolutions. - Charts for YPAD: http://www.airservic...com/aip/aip.asp __________________________________________________________ This scenery is designed to work best with: Vehicle Library Extension (http://forums.x-pilo...n-xp9xp10-isdg/) FlyJSim Asphalt Textures (http://forums.x-plan...&showfile=16270) SkyMAXX sky colouring using "Vivid Skies" (http://forums.x-plan...&showfile=15821) BeachMAXX Ocean Textures (http://forums.x-plan...&showfile=17311) Autogate DGS System (http://forums.x-plan...s&showfile=5038) Wide Taxiway Line Markings (http://forums.x-pilot.com/index.php/files/file/406-wide-taxiway-markings-library-replacement/) __________________________________________________________ Still to fix: - Some buildings are still a little too "glow in the dark" at night. These are converts from AussiePak1 which were toned down, but could use some better lighting. - Lost the edge grass facade functionality in the 10.20 betas. Bug report submitted. __________________________________________________________ License: This scenery is Postcard-Ware. Send us a postcard if you like the work! We'd love to hear from you. See the included README.RTF for our address. __________________________________________________________ Contact us @ X-Pilot.com: chris k ropeless skyflyer sethesus karingka __________________________________________________________ Other ISDG Group Member's Sceneries: YSSY Sydney Australia - http://forums.x-pilot.com/index.php/files/file/78-yssy-sydney-australia-airport-photo-scenery-xp10/ YSCN Camden Australia - http://forums.x-plan...&showfile=14867 NZCH Christchurch NZ - http://forums.x-pilot.com/index.php/files/file/122-nzch-christchurch-airport-photo-scenery-xp10-isdg/ KPDX Portland OR USA - http://forums.x-plan...&showfile=11248 KRMN Stafford VA USA - http://forums.x-plan...&showfile=15638 Glenelg, South Australia - http://forums.x-pilot.com/index.php/files/file/345-glenelg-south-australia-near-ypad-xp10/ KSEA Seattle WA, USA - http://forums.x-pilot.com/index.php/files/file/321-ksea-seattle-photoreal-underlay/ KBOS Boston, MA, USA - http://forums.x-plan...&showfile=15851 __________________________________________________________ Copyright © 2012-2013 by the ISDG (International Scenery Development Group) Click here to download this file

File Name: KSEA Seattle Photoreal Underlay File Submitter: chris k File Submitted: 26 Dec 2012 File Category: DSF Scenery Packages X-Plane Version(s): X-Plane 10 KSEA Seattle Photoreal Underlay Version 0.1 Dec 27, 2012 Chris K and the ISDG Group __________________________________________________________ Tired of Flying around the plain textured KSEA Demo Airport? Feel Like filling your VRAM and Tanking your FPS at the same time? Hate having trees in-line with your approaches? You're downloading the right file! Note: This is for XP10 as it uses 4096 x 4096 Textures for fast rendering __________________________________________________________ Orthophotos courtesy of the United States Geological Survey (USGS) The dataset is the 30cm/pixel USGS HiRes Orthoimagery This Imagery is in the Public Domain as per: http://cumulus.cr.usgs.gov/listofortho.php Copyrights and Credits USGS-authored or produced data and information are considered to be in the U.S. public domain. When using information from USGS information products (chrisk - which we are), publications, or Web sites, we ask that proper credit be given. Credit is provided by including the following citation: Credit: U.S. Geological Survey Department of the Interior/USGS The USGS home page is http://www.usgs.gov. __________________________________________________________ Click here to download this file

Hello All, Since we're nearing completion of the YSSY Airport Photo Scenery Project, I'd like to get all of your inputs for the next project we should take on. The Airports listed above I have short-listed, since they all have 10-15cm royalty-free orthophoto tiles available for them. They also have existing X-Plane objects made for them: - YPAD and YMML we can derive permission from the AussiePak's/VOZ for inclusion. - CYYZ There is an excellent FSX conversion from 2007 which we could also derive rights to. - NZAA was done by the XPJets team back in the v7 run, and I have shown that they can be converted to XP8-OBJ spec for use in XP10; and would just need Robin/Dhruv's blessing to use. So, that being said, cast your vote. i would also suggest that if you vote for them, that you can also contribute somehow to the project (i.e. donation of objects, willingness to help Photoshop things, help beta test and give precise feedback (i.e. this line needs fixing w/coordinates and screenshots), and perhaps use WED1.2 to fix up taxiway markings or provide XP10 ATC/AI Airport "Flow" design for taxi routes, etc..) If you have another one not on this lease, use the "Write in"; but please ensure that (1) 10-15cm orthophotos already exist for it, and know where we can download them, and (2) ensure that there are existing objects somewhere (either in a free FSX conversion we could use, or an earlier X-Plane build), which we could attempt to derive rights from. I don't want to re-invent the wheel here. =) Thanks for the feedback! You can choose Multiple Responses in the poll above. - CK and all the helpers.