safeflight_

Thank you very much for the continious improvement and your support. Excellent aircraft !

Sounds like a noisy joystick, try to setup deadzones in the xplane settings menu

It works as intended but some VATSIM controller seems not to respond, even when showing their CPDLC adress. Maybe related to workload or their interest talking to the pilot.

I had the apu battery failure message during flight too but landed safely. With connected AC power I could start the apu again, the CAS apu battery message went white but it looked like it was not loaded. A failure was not triggered and I did not find an option to reset the apu battery. How can I resovle the ap battery failure ? Should I reset the airframe ?

What is the procedure landing at winds with more than 10 kts and flaps 3 or 4 ?

Ok, I understand - it just engages the reverser function of the engines. I thought about the Reverser implemented in the Rollon CRJ200.

Hi, I am struggling with the auto thrust reverse system. I armed the trust reverser - display shows L and R REV ARMED While landing with manual throttle, I move throttle to idle and engage speedbrakes. Should the thrust reverse starts automatically ? Or do I miss something ? Thanks.

Deleted

Hi, I have problems operating the stairs in the Cargo and AEW version. It seems the ground plate is not moving or just the stair moves and cannot be handled using the red manipulator. The PAX version is doing fine.

The hiss sound is the right pack sound which is enabled by default in turnaround mode since v1.3. It seems that the IXEG sound engine loads sometimes one file louder than standard. Prior v1.3 the apu sound was louder than standard. You can easily cure this by switiching off/ on the right pack.

Thanks for your first hand information. Will operate the APU then like in real :) Cheers, Cord

I saw some B733 CBT to get more detailed in the aircaft operation. The APU can feed the packs of each side in AUTO or HIGH. In which situations are the packs running in HIGH ? The underpowered APU of the B732 could only feed the starting engine. Is it allowed to start the engines of the B733 with one pack on AUTO ? The IXEG can perform it with reduced pressure, but this does not mean it is allowed.

Try the following, check when APU is running in the overhead panel status of right pack. If it is on AUTO you will hear the pack sound from outside. If you switch off you will just hear the hydraulic and the APU sound. I think the right pack is now on by default (1.31) if you start in turnaround Status.

I can confirm the missing side menu with the latest Gizmo beta out of the known bugs and workaround thread. I reverted to the previous Gizmo beta without removing any other plugin and everything worked as intended, only the gpu bug come up. XP11.41 Mac install

Hi Jan, flew around in severe icing conditions and found out that it is ice_simulator.lua related. With lua file entering clouds the flashing starts after switching off the window heater. With lua file disabled I did not noticed the flashing. Did not have this before using the ice_simulator.lua file. Btw. eycandy rain and ice simulation and everything working frameless on my Mac ! Sorry for the report. Thanks for the great update ! Cord

Does anyone noticed a flashing ice buildup when switching off the window heater in icing conditions ? I flew in cloudly weather at FL120 and had icing conditions. I switched off all switches of the window heater system and go the large ice segment flashing. Could reproduce it switching the heating system on and off. Without icing conditions no ice and no flashing effect.

Great ! Thanks for your efforts

Is it possible that I can give instructions how to amend the cabin file in order to get easy cabin lights ?

IXEG 737 Hamburg International livery View File Hamburg International livery for the excellent IXEG 737 Used best with winglets checked Submitter safeflight_ Submitted 07/05/2016 Category IXEG 737 Classic Livery For Click Here For Aircraft X-Plane Version(s)

It is on the way

That happens to all aircrafts using small objects for HD textures areas, starting at the point the LIT textures are beeing loaded. You can find it on the JAR aircrafts too. No bug at all.

Ready for download http://forums.x-pilot.com/files/file/929-ixeg-737-sas-livery/

You are welcome, just for your needs