Prefect99

That you didn’t set an N1 target. The checklist will tell you what to do.

Your OFP will give you fuel weight, so only need to divide by density to get volume. No need for a conversion. Even then, you should get a warning when doing PERF INIT before departure. And even then be aware of your current fuel burn in flight and time to destination - less than an hour spare and you should be asking questions. Divert to nearest suitable is always an option, don't press on to destination with low fuel. Maybe the most useful point for you to consider is, unlike a car, aircraft fuel should always be thought of in terms of time.

You’re going to have to learn almost from scratch. It’s a very different machine and the initial learning curve is steep. Dig into the included docs as an initial primer, for the first hour or two I simply did cockpit and systems famil on the ground. Using the study menus is really useful and will help you appreciate the detail that has gone into the aircraft. Then there are some good videos on YouTube from Graeme and Rob Hammer, Toto also makes an appearance from time to time. Honestly, start slow, treat it like a real type rating. There is also a discord channel too.

That must be a very short list of things

The checklist is built in. You even have an FO.

I am sure I got it working without power by just setting the park brake etc. BP doesn’t know there is no pressure in the system, just the “switch” setting.

You’d be surprised how many people think they are always filled to the top. Simbrief forecasts are usually very accurate, do you use ASXP too? Conversion errors are not unheard of in real incidents, having a rough idea of factors and only converting at the end can help. You have my sympathy; one aircraft I flew had the left tank in USG, the right in ImpG, weights all in LBS, fuel volumes in litres and an ASI primarily in MPH!

Aircraft are not like cars, you don’t just fill them to the top. Do you use simbrief?

I’ve also experienced FPS tanking with the van. Will grab the log next time.

Sounds sensible, far too sensible for a eurocontrol validated route airways are so last century!

@oisin650is setting final cruise and then putting intermediate hard alts in the legs also valid? I think I tried that on this flight but it didn’t work.

Appreciate it wasn’t really FL190 and the short lower airway leg wasn’t long enough to put in FL190 but that’s what I would always do when it comes to step climbs. OFP steps were LPFR/0190/NAPES/0380 and then I didn’t bother with the yo-yo by going direct.

Depends, if it’s a single owner you go where they want. Fractional ownership might be all over the place, proper charter could certainly be pretty random. Depends what you want, might be some suitable VAs online.

Crz alt FL190 TUPI1V TUPIX Y135 NAPES/N0464F380 UN747 AMOTA UT312 BAZAS/N0465F370 UM192 ROLAS/N0463F380 UN851 RUXET RUXE3N Had to manually update cruise to FL380, then did a self direct BAZAS TOSGA maintaining FL380. Entered the hold one lap at XEMDU then vectors.

File or just the route?

I was inbound to the fix with a last minute change to the ILS. I think the CTD came just after changing NAV SRC to the ILS and I was 1 dot high on the GS. CL650_Log.txt Log.txt

This is why it’s important to actually troubleshoot, so much variability. One aspect may also be scenery on storage that’s too fast, flooding the CPU. With ortho on my SSD there would be a noticeable dip when a tile loaded. Over LAN hardly any! Don't forget that Xplane is still significantly CPU bound, HT can also cause issues.

Try removing any ortho. My CPU times take a hammering at high zoom levels which seems to point to VRAM paging, even though the GPU is not working very hard. Using the <6GB option ortho over ZL17 isn’t an option for me with a 1070ti. You can’t really discount it without testing without ortho/TE.

Last flight for me was fine wrt cruise speed and fuel burn.

Why does it even matter? When are you ever going to pick an aircraft up with zero fuel, after maintenance. Fly the jet and worry about something else

Thanks, did seem that way with the DME freq not showing in the map. I wonder if it’s simply a question of the channel parings needing to be added, do you know if the frequency is included in the navdata or just the channel?

#ATCtroll