Jump to content

LPNils

Members
  • Posts

    54
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by LPNils

  1. EHOW Oostwold View File Oostwold, Groningen, Netherlands Oostwold Oldambt airport is a relatively small airfield in the northeastern corner of the Netherlands. This field was a private agricultural airfield for many years. More recently the airfield became public, welcoming visitors. The runway is long and wide, with grass/concrete slabs in the first two thirds of runway 25. Once every two years Oostwold is home to an airshow, hosting many vintage and modern visitors. An airport mainly occupied by general aviation company Tom van der Meulen, operating C172s (PH-LFB, LFA, KAD, JBB, TOL), C182 (PH-JSA), C206 (PH-TOO), Piper Cubs (PH-TOM & PH-TOP, many more in storage), Boeing Stearman (N60839), Harvard (PH-KLU), and the P-51D Mustang "D*mn Yankee" (PH-PSI). Charts & Procedures can be found on the airport's official website or at AIS Netherlands. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library R2_Library 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click). Submitter LPNils Submitted 02/13/2016 Category DSF Scenery Packages X-Plane Version(s)
  2. EHST Stadskanaal View File Stadskanaal, Groningen, Netherlands. Stadskanaal is a small airstrip in the rural region of Stadskanaal, northeastern Netherlands. This field, with its very short runway, is open to Ultra Light General Aviation (experimentals). The field posesses quite a few hangars and a modern looking restaurant/station building with 'tower' on top. A tiny campsite is even available for your overnight stay or fly-in. Make sure you make yourself aware of the airfield and circuit procedures as the tight circuit makes it a challenge to approach the grass strip. This airfield is 12NM south of Oostwold Airport and 8,5NM southeast of glider field Veendam. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library R2_Library 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click). Submitter LPNils Submitted 02/13/2016 Category DSF Scenery Packages X-Plane Version(s)
  3. That's exactly what happened and what it 'felt' like. REALLY easy to induce oscillation n stuff.
  4. Be gentle with controls, flies more like a laggy 747 than a 737. Good luck!
  5. Just shut off both systems during a circuit. Dang. Landing is really scary without hydraulics. And it's a proper fight for control while reaching out for the alternate gear levers & altn flap switch. For a 733 rookie that is. Really interesting. But, a lot of fun! Thanks for the reminder Morten. BTW: At the age of approx 13 I was a passenger on a full motion F70/100 sim. The capt requested an En-2 on departure from LOWI. Saw the guy fight the controls without hydraulics. Was really impressive. More impressive: he landed it quite nicely (180+ turn from 5000ft amsl, halfway down the runway). Even the instructor was amazed.
  6. I have to say that if I remember correctly this was also the case in a full motion level-D 733 sim I was in some time ago. I can't provide proof or anything now. Just basing this on vague memory, but I think it is supposed to be quite loud. Then again, could be wrong. This static like wind noise is inducing tiredness when loud. Same or even more so with inverter noise (but that is not really relevant now, but that high pitch noise is VERY tiring when working on a powered a/c for a while. Our college F-16A is the worst in the hangar I think). I do encounter the same tiring effect on other a/c. It's just that kind of radio static sound that makes you tired.
  7. Yeah, Next to the pedestal. Grab it when it's still hot & fresh. If the lighting is just right you can see it happen when the a/c is moving about a bit. Great for spotting turbulence when not looking towards the instruments. Cheers! (* thx Laminar Research for releasing XP10 in a metal case, so I can use a magnet to hang my paper x-list.)
  8. I have had no issues. A couple of tech failures, but I haven't checked to see if random failures is on. Was a nice challenge anyways. I want to thank the IXEG team as well. The attention to detail is fenominal. Great to see the coffee bouncing about in the cup! I love coffee. The master caution annunciator looking kind of loose is great as well. Very dynamic. Plus, the controls finally move along with the A/P (other a/c look so static). The engines take a lovely long time to spool down. The sound is fenominal! Really immersive. I was parked, with the cockpit windows open, messing about with the CDU, and noticed something about the sound changing. Turned out that something indeed changed in my right bleed air system. Can't remember exactly what it was but the air was going right overboard (isln valve closed). So yeah. That's what I heard. oooh and and the CFMs look great as well! I was quite amazed to see through the spinning fan. The click n drag is nicely tuned, the pop up menu works great, checklist is in the right place for me to quickly grab. Flight dynamics are awesome. I could go on for thousands more words trying to describe how nicely immersive this 733 is. Even though I noticed some people are reporting issues. Some of them, IMO, unreasonable, taking the complexity of this product into account. I think you guys did a brilliant job. Thanks! I'm a total fan.
  9. Waiting for release with a cup of coffee here. No hurry at all Wish I had these here at home, though.. But because of college recess I won't get to check 'em out for two weeks. Had to keep my eyes off these manuals and focus on work. Was kind of excited for today.
  10. Or we could enjoy the fact this team is not trying to be everyone else. Doing their own thing and working according to their own values. Last time I checked the world was still spinning and I also noticed my other aircraft in X-Plane still worked. So "tired of waiting"... Go to sleep. And stop demanding things you have no right to demand. IXEG! Good job guys! And thank you guys for being patient and developing this wonderful product up to the standards you guys desire. I believe the X-Plane payware world is in need of more dedicated and passionate guys like you! It was in 1998 that the virus of aviation infected me big time. As a human lvl 8 I was invited to the cockpit of PH-OZA of Air Holland and was blown away by the cockpit of this 733 and the distant view of mountain tops on the horizon, sticking out from the clouds. Ever since I wanted to be in aviation. Took a weird detour in health care a couple of years ago and I am glad I stepped away from that and went back to aviation. Now, maybe more than ever, I know what I want to do in aviation. So... before I write an autobiography here.... I have always had a special place in my heart for the 733 and this IXEG tribute is therefore something I very much look forward to enjoying for many years to come. Happy landings y'all!
  11. Those domes really add character to those old pistonpounders. But I'm not sure if it would suit the 737 that well Img from flickr
  12. My guess is that there are more evident parts of an aircraft that attract a bird's undevided attention a bit more than that beautifully decorative spinner whirl. I would consider a taxi or landing light and the aircraft noise quite annoying. But hey, it turns out I'm not a bird. So what do I know. This is what Rolls Royce said about the whirls: I think their main reason is for ground crews to see easily if an engine is running. On a related note: props have the stripes on the tips to make them more visible while spinning.
  13. Well.. this thread isn't really on topic anyways. Just passing time until I can get my hands on the 733 So, ehr. What's next?
  14. Let's put it this way. I do respect Airbus aircraft. But I love to feed on the discussion and put some fuel on the fire. But! I am that purist kind of guy. The more analogue, the better. (not only in aviation ) I have flown an A320 full motion sim, and it was fun for a while. Just don't like the way the throttle works, the point and shoot controls (auto trim) and the sidestick. Aerobatics are blocked by the flight computers. But yeah this is trying to do stuff you shouldn't do in an airliner On the bright side: they do come with amazingly useful dinnertables where in Boeings the control column would be in the way. And the tech behind it is still fascinating I think. Flew on a couple Busses as a passenger, they got me to where I needed to be very comfortably Another Airbus concept I love it the E-Fan. Brand new technology at work. All a matter of opinion. Cheers!
  15. Exactly What fun is there in flying a computer on your computer
  16. According to F70 AOM, 7.03.01: Flight Techniques - Take-Off (v5 issue 1): "Flaps 0, 8 and 15 are available for take-off" Performance pages include graphs with t/o performance for those 3 settings. My F100 AFM confirms. So yeah. No flap take-offs are definitely possible. But they don't have slats at all
  17. Hmm. Another airliner I've missed since switching over to XP is either a Fokker 70/100 or Fokker 50/60.
  18. Congrats on finishing the code. I hop testing goes well, without too many unexpected issues! Cheers
  19. Of course. They deserve to do whatever they want and need. Indeed, I think this topic is just a little bit of fun. Indeed dreaming about what they could turn their abilities to. Neither of us is in a position to demand anything
  20. EHTX Texel International Airport View File Texel, North-Holland, the Netherlands Texel International Airport is a small grass airport on the island of Texel (Tessel) in the Netherlands. Although the airport itself isn't particularly big, runway 04/22 is allegedly one of the largest grass runways in western Europe (1115x40m). Usually the airfield permits only aircraft of to 6000kg MTOW, however with special permission (depending on weather conditions) heavier aircraft can land here. Some special visitors with an MTOW obviously larger than 6 tonnes are a Fokker 60 Utility (23t kg) and touch & go's from Fokker 100 aircraft fresh from the Fokker plant (44,5t kg). Fokkers were a regular sight at this fun airport. Runway 13/31 is quite a bit shorter but in strong N/W S/E winds it is very useful. (630x40m) Happy Landings! For more detailed navigation charts see AIS Netherlands or the Texel Airport website . Please take a look for realism, just like most Dutch airfields Texel has quite strict approach and departure procedures, even special weekend and weekday procedures. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library RUScenery 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click). Submitter LPNils Submitted 02/13/2016 Category DSF Scenery Packages X-Plane Version(s)
  21. Version 1.21

    87 downloads

    Texel, North-Holland, the Netherlands Texel International Airport is a small grass airport on the island of Texel (Tessel) in the Netherlands. Although the airport itself isn't particularly big, runway 04/22 is allegedly one of the largest grass runways in western Europe (1115x40m). Usually the airfield permits only aircraft of to 6000kg MTOW, however with special permission (depending on weather conditions) heavier aircraft can land here. Some special visitors with an MTOW obviously larger than 6 tonnes are a Fokker 60 Utility (23t kg) and touch & go's from Fokker 100 aircraft fresh from the Fokker plant (44,5t kg). Fokkers were a regular sight at this fun airport. Runway 13/31 is quite a bit shorter but in strong N/W S/E winds it is very useful. (630x40m) Happy Landings! For more detailed navigation charts see AIS Netherlands or the Texel Airport website . Please take a look for realism, just like most Dutch airfields Texel has quite strict approach and departure procedures, even special weekend and weekday procedures. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library RUScenery 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click).
  22. Woah that Hansa livery looks sharp! Makes me kind of have to post this one.. The still flying brother of the one in the cockpit picture.
  23. Version 1.2

    25 downloads

    Stadskanaal, Groningen, Netherlands. Stadskanaal is a small airstrip in the rural region of Stadskanaal, northeastern Netherlands. This field, with its very short runway, is open to Ultra Light General Aviation (experimentals). The field posesses quite a few hangars and a modern looking restaurant/station building with 'tower' on top. A tiny campsite is even available for your overnight stay or fly-in. Make sure you make yourself aware of the airfield and circuit procedures as the tight circuit makes it a challenge to approach the grass strip. This airfield is 12NM south of Oostwold Airport and 8,5NM southeast of glider field Veendam. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library R2_Library 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click).
  24. Version 1.45

    25 downloads

    Oostwold, Groningen, Netherlands Oostwold Oldambt airport is a relatively small airfield in the northeastern corner of the Netherlands. This field was a private agricultural airfield for many years. More recently the airfield became public, welcoming visitors. The runway is long and wide, with grass/concrete slabs in the first two thirds of runway 25. Once every two years Oostwold is home to an airshow, hosting many vintage and modern visitors. An airport mainly occupied by general aviation company Tom van der Meulen, operating C172s (PH-LFB, LFA, KAD, JBB, TOL), C182 (PH-JSA), C206 (PH-TOO), Piper Cubs (PH-TOM & PH-TOP, many more in storage), Boeing Stearman (N60839), Harvard (PH-KLU), and the P-51D Mustang "D*mn Yankee" (PH-PSI). Charts & Procedures can be found on the airport's official website or at AIS Netherlands. Requires: OpenSceneryX RD_Library RE_Library Handy Objects Library R2_Library 3D People Library If you do not have these libraries installed, or if they have not been updated in a while, take a look here (click).
×
×
  • Create New...