JGregory

Just to clarify... you mean the "degrees" of roll, not the "rate", right? Most likely you are flying too fast. Being looked into. I have asked for log files from you (and others). Again, most likely from flying too fast. What was your airspeed? As in the real aircraft, this option is available on the copilot altimeter. Please clarify. You can use the dial on the center pedestal to adjust the heading. This could be X-Enviro's issue and have nothing to do with Gizmo or the Saab. Works fine for me.

@flydav @Steve Simpson @nicotum I need your log files !!!!

Yes, you are loading a Saab v1.3, and that is why you're CRS dial is not working. You need v1.5. If you feel the installation did not run properly you should contact Cameron at X-Aviation support.

Your log files indicate the they are not from a v1.5 install of the Saab. Please run the installer again and then verify that the aircraft has installed correctly. You can select the user preferences from the Gizmo side bar and the installed version will be shown at the bottom of the window.

What you're screenshots are showing is that you have moved the manipulator to the ON position, "LES/saab/emg_lights_toggle" = 2, but the guard is in place so the switch will not move. Note the value of the animation DataRef..."LES/saab/emg_lights_toggle_pos" is = 0. The movement is very small, so brute force won't work :). Try moving the switch slowly and only a very small amount. You want to see the manipulator and animation DataRefs = 1.

I need to see your log files, please post them here.

Always post your log files when you are reporting an issue. I just tested the manipulator and it is working as expected.

This is a bug and has been fixed. We will advise on how to get an update.

Different airports?

I just tested it and it is working fine here.

It could be that the window is "off screen". Go to Plugins > Gizmo64 > Gather Windows, and see if that corrects the problem. Glad to hear the other issue is resolved.

Please try other airports and report back.

So you are saying this happens on EVERY landing ????

This (sound) bug was fixed in v1.4.1. Please make sure you have the correct version installed. The GizmoLog.txt file should be showing this.... LES: Load Saab 340A Scripts - v1.5 LES: Load Saab 340A Hot Fix - (None) Your log file does NOT show that.

You have a lot of plugins and there is most likely a conflict. My guess is the culprit is XSB. To test, remove all your plugins (except Gizmo) and then test fly. Put the plugins back one-by-one and test to determine which one is causing the problem.

Does this occur on every approach/landing? Or, is it intermittent?

Actually the tiller should be pushed "in" to activate steering. However, I think we have discovered a bug in the manipulator... stay tuned.

Just to be clear... Version 1.5 will be "universal" for XP v10 and v11. You will be able to choose the version when you install the aircraft.

Your picture does not show anything that helps to diagnose your problem. The user pref window shows that you have scroll wheel manip selected. Turn that off and the try using the standard manip ti change the altitude. In addition, you seem to be running several plugins, one of which may be interfering... remove them and test again.

My guess is you have the scroll wheel option turned on in the user preferences. If so, the manipulator is custom and will not be "highlighted".

This is a known bug, which has been fixed and will be part of the 1.5 update.

Spooky, As you can see in your screenshot, if you hover the mouse over the area you can see the command appear. This problem comes from the way I coded the commands before the new XP v11 UI was available. We won't be changing this for the current version of the Saab, but it will get fixed in v2. Use the mouse hover technique until v2 is available,

SilentV, Are you sure you have version 1.4.1 of the Saab? Your log files show that you have an older version.

in Gizmo, "OnDraw_gauges_3D" tells X-Plane what phase you want to draw in. So, in C/C++, an equivalent would be XPLMDrawingPhase = xplm_Phase_Gauges as Ben described above. Phases in the SDK are defined here.