crisk73 Posted May 19, 2016 Report Posted May 19, 2016 Yes its a problem of ivai not recognising the secondary connection. Blame on the devs who don't care solving the issue (I've already asked for support in the IVAO forums but no response at all..). The same for ivai with ivap + ivac for the tower view.. No luck as well. We personally use to connect both to the network putting in RMK "crew of 2, pilot flying callsignX, pilot monitoring callsign Y", so we are both synced with the comms. TS2 for ATC comms, TS3 for internal comms. Only one transponder set to on to avoid tcas alert and confusion for the controllers. Quote
sparkie66 Posted May 19, 2016 Report Posted May 19, 2016 3 minutes ago, crisk73 said: Yes its a problem of ivai not recognising the secondary connection. Blame on the devs who don't care solving the issue (I've already asked for support in the IVAO forums but no response at all..). The same for ivai with ivap + ivac for the tower view.. No luck as well. We personally use to connect both to the network putting in RMK "crew of 2, pilot flying callsignX, pilot monitoring callsign Y", so we are both synced with the comms. TS2 for ATC comms, TS3 for internal comms. Only one transponder on to avoid tcas alert. yeah we want to do the same, but don't you see eachothers planes inside one another, if you do it like that? 1 Quote
crisk73 Posted May 19, 2016 Report Posted May 19, 2016 yeah we want to do the same, but don't you see eachothers planes inside one another, if you do it like that? No we don't, occasionally you can see the label of the other plane but only sometimes, it doesn't bother.. 1 Quote
sparkie66 Posted May 19, 2016 Report Posted May 19, 2016 1 hour ago, crisk73 said: No we don't, occasionally you can see the label of the other plane but only sometimes, it doesn't bother.. hmm, ok. We'll try that then, thanks. this beats fiddling with TS2 on approach. 1 Quote
birdy.dma Posted May 19, 2016 Report Posted May 19, 2016 3 hours ago, crisk73 said: No we don't, occasionally you can see the label of the other plane but only sometimes, it doesn't bother.. 1 hour ago, sparkie66 said: hmm, ok. We'll try that then, thanks. this beats fiddling with TS2 on approach. How to disable the CSL of you partner (both pilots connected). Open X-Ivap.conf with your favorite text editor. [SOUND] VOICE=1 [PREFERENCES] TAGGING=0 COUPLING=0 WEATHER=0 FIXEDWINDLAYER=1 MAXVISIBILITY=80000 TURBULANCE=15 [PLANE] RESOLUTION=8 [ACCOUNT] FOLLOWME=0 REMEMBER=1 HIDEADM=0 PORT=6809 SERVER=eu2.ivan.ivao.aero BASE=LFHO REALNAME=Claude ROULLIER PASSWORD=XXXXXX VID=XXXXXX CALLSIGN=VPI007 [CSL] PILOT1=VPI07 Add the last 2 lines. Type here the call sign of the other pilot, and vice versa. PS: For the controlers, only one pilot must set the transponder to ON (The knob is not synchronized in my file). Claude. 1 Quote
jsnapp Posted May 19, 2016 Author Report Posted May 19, 2016 I thought someone mentioned on their twitch stream that they had compiled the X-IVAP client for smart copilot. This isn't a solved problem yet? Quote
sparkie66 Posted May 19, 2016 Report Posted May 19, 2016 Known issues in version x-IvAp 0.3.4Pay attention that no issues will be taken from a beta version of X-plane. X-ivap cannot connect on Ivai as a secondary connection (like tower view).Accented characters (é à ù ê ö etc) can't be used and will cause text typed after the character to not appear.Supervisor info command doesn't work. Quote
sparkie66 Posted May 19, 2016 Report Posted May 19, 2016 (edited) 3 hours ago, birdy.dma said: How to disable the CSL of you partner (both pilots connected). Open X-Ivap.conf with your favorite text editor. [SOUND] VOICE=1 [PREFERENCES] TAGGING=0 COUPLING=0 WEATHER=0 FIXEDWINDLAYER=1 MAXVISIBILITY=80000 TURBULANCE=15 [PLANE] RESOLUTION=8 [ACCOUNT] FOLLOWME=0 REMEMBER=1 HIDEADM=0 PORT=6809 SERVER=eu2.ivan.ivao.aero BASE=LFHO REALNAME=Claude ROULLIER PASSWORD=XXXXXX VID=XXXXXX CALLSIGN=VPI007 [CSL] PILOT1=VPI07 Add the last 2 lines. Type here the call sign of the other pilot, and vice versa. PS: For the controlers, only one pilot must set the transponder to ON (The knob is not synchronized in my file). Claude. for some reason my conf file gets rewritten ech launch of xivap and the csl line gets removed. SIGH! edit: I put the file on read only and will see how that goes. Edited May 19, 2016 by sparkie66 Quote
Em69 Posted May 19, 2016 Report Posted May 19, 2016 Hello, i'm open for cockpit Sharing ... ( ixeg 737 ) and IVAO or no. Quote
birdy.dma Posted May 20, 2016 Report Posted May 20, 2016 17 hours ago, sparkie66 said: for some reason my conf file gets rewritten ech launch of xivap and the csl line gets removed. SIGH! edit: I put the file on read only and will see how that goes. I am may be faulty. No blank lines: [SOUND] VOICE=1 [PREFERENCES] TAGGING=0 COUPLING=0 WEATHER=0 FIXEDWINDLAYER=1 MAXVISIBILITY=80000 TURBULANCE=15 [PLANE] RESOLUTION=8 [ACCOUNT] FOLLOWME=0 REMEMBER=1 HIDEADM=0 PORT=6809 SERVER=eu2.ivan.ivao.aero BASE=LFHO REALNAME=Claude ROULLIER PASSWORD=xxxxxxxx VID=xxxxxxxx CALLSIGN=VPI007 [CSL] PILOT1=VPI07 Quote
K4bel123 Posted June 12, 2016 Report Posted June 12, 2016 Is there anybody who wants to fly today with shared cockpit? CET for me and English, German and Spanish possible Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.