Jump to content

SmartPilot (Shared Cockpit) Partners


jsnapp

Recommended Posts

Yes its a problem of ivai not recognising the secondary connection. Blame on the devs who don't care solving the issue (I've already asked for support in the IVAO forums but no response at all..). The same for ivai with ivap + ivac for the tower view.. No luck as well.

We personally use to connect both to the network putting in RMK "crew of 2, pilot flying callsignX, pilot monitoring callsign Y", so we are both synced with the comms. TS2 for ATC comms, TS3 for internal comms. Only one transponder set to on to avoid tcas alert and confusion for the controllers.

Link to comment
Share on other sites

3 minutes ago, crisk73 said:

Yes its a problem of ivai not recognising the secondary connection. Blame on the devs who don't care solving the issue (I've already asked for support in the IVAO forums but no response at all..). The same for ivai with ivap + ivac for the tower view.. No luck as well.

We personally use to connect both to the network putting in RMK "crew of 2, pilot flying callsignX, pilot monitoring callsign Y", so we are both synced with the comms. TS2 for ATC comms, TS3 for internal comms. Only one transponder on to avoid tcas alert.

yeah we want to do the same, but don't you see eachothers planes inside one another, if you do it like that?

  • Upvote 1
Link to comment
Share on other sites

yeah we want to do the same, but don't you see eachothers planes inside one another, if you do it like that?

No we don't, occasionally you can see the label of the other plane but only sometimes, it doesn't bother..

  • Upvote 1
Link to comment
Share on other sites

3 hours ago, crisk73 said:

No we don't, occasionally you can see the label of the other plane but only sometimes, it doesn't bother..

 

1 hour ago, sparkie66 said:

hmm, ok. We'll try that then, thanks. this beats fiddling with TS2 on approach.

How to disable the CSL of you partner  (both pilots connected).

 

Open X-Ivap.conf with your favorite text editor.

 

[SOUND]

VOICE=1

[PREFERENCES]

TAGGING=0

COUPLING=0

WEATHER=0

FIXEDWINDLAYER=1

MAXVISIBILITY=80000

TURBULANCE=15

[PLANE]

RESOLUTION=8

[ACCOUNT]

FOLLOWME=0

REMEMBER=1

HIDEADM=0

PORT=6809

SERVER=eu2.ivan.ivao.aero

BASE=LFHO

REALNAME=Claude ROULLIER

PASSWORD=XXXXXX

VID=XXXXXX

CALLSIGN=VPI007

[CSL]

PILOT1=VPI07

 

Add the last 2 lines. Type here the call sign of the other pilot, and vice versa.

PS: For the controlers, only one pilot must set the transponder to ON (The knob is not synchronized in my file).

 

Claude.

  • Upvote 1
Link to comment
Share on other sites

Known issues in version x-IvAp 0.3.4

Pay attention that no issues will be taken from a beta version of X-plane.



X-ivap cannot connect on Ivai as a secondary connection (like tower view).

Accented characters (é à ù ê ö etc) can't be used and will cause text typed after the character to not appear.

Supervisor info command doesn't work.

Link to comment
Share on other sites

3 hours ago, birdy.dma said:

 

How to disable the CSL of you partner  (both pilots connected).

 

Open X-Ivap.conf with your favorite text editor.

 

[SOUND]

VOICE=1

[PREFERENCES]

TAGGING=0

COUPLING=0

WEATHER=0

FIXEDWINDLAYER=1

MAXVISIBILITY=80000

TURBULANCE=15

[PLANE]

RESOLUTION=8

[ACCOUNT]

FOLLOWME=0

REMEMBER=1

HIDEADM=0

PORT=6809

SERVER=eu2.ivan.ivao.aero

BASE=LFHO

REALNAME=Claude ROULLIER

PASSWORD=XXXXXX

VID=XXXXXX

CALLSIGN=VPI007

[CSL]

PILOT1=VPI07

 

Add the last 2 lines. Type here the call sign of the other pilot, and vice versa.

PS: For the controlers, only one pilot must set the transponder to ON (The knob is not synchronized in my file).

 

Claude.

for some reason my conf file gets rewritten ech launch of xivap and the csl line gets removed. SIGH! 

edit: I put the file on read only and will see how that goes.

Edited by sparkie66
Link to comment
Share on other sites

17 hours ago, sparkie66 said:

for some reason my conf file gets rewritten ech launch of xivap and the csl line gets removed. SIGH! 

edit: I put the file on read only and will see how that goes.

I am may be faulty.

No blank lines:

[SOUND]
VOICE=1
[PREFERENCES]
TAGGING=0
COUPLING=0
WEATHER=0
FIXEDWINDLAYER=1
MAXVISIBILITY=80000
TURBULANCE=15
[PLANE]
RESOLUTION=8
[ACCOUNT]
FOLLOWME=0
REMEMBER=1
HIDEADM=0
PORT=6809
SERVER=eu2.ivan.ivao.aero
BASE=LFHO
REALNAME=Claude ROULLIER
PASSWORD=xxxxxxxx
VID=xxxxxxxx
CALLSIGN=VPI007
[CSL]
PILOT1=VPI07

 

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...