jatar Posted June 3, 2016 Report Posted June 3, 2016 (edited) Yesterday after a while I could finally make my first flight and found some curiosities and mistakes. With v1.4.2 and weatherIf the PNF sets the FMC, in both PF and PNF dep, star and route appear correctly.PNF can not activate APPF can not adjust flaps.Yokes moved auto to the right by 3 degrees You could put in the first thread identified problems and whether or not they are solved for the new we can learn and not repeat reports of known bugs.Thank you for the effort and say this that you are done should be an obligation on any aircraft developed, enriches the simulation of a fully.Thank you very much. Edited June 3, 2016 by jatar Quote
birdy.dma Posted June 3, 2016 Author Report Posted June 3, 2016 1 hour ago, cmbaviator said: Did another flight yesterday with the " with weather cfg file " from 1.4.2, and it worked pretty well, the wind data was perfect but it seems that the slave didn't have the same cloud position, we both have NOAA, SMP V3 and RWC. Probably better with FSRGW, and depend of the settings of SMP, as they are probably différents. Quote
birdy.dma Posted June 3, 2016 Author Report Posted June 3, 2016 1 hour ago, jatar said: Yesterday after a while I could finally make my first flight and found some curiosities and mistakes. With v1.4.2 and weatherIf the PNF sets the FMC, in both PF and PNF dep, star and route appear correctly.PNF can not activate APPF can not adjust flaps.Yokes moved auto to the right by 3 degrees You could put in the first thread identified problems and whether or not they are solved for the new we can learn and not repeat reports of known bugs.Thank you for the effort and say this that you are done should be an obligation on any aircraft developed, enriches the simulation of a fully.Thank you very much. Good idéa.. I can also join a read_me in the .zip. I just need a help, as my English is sometimes unclear. cmbaviator are you with me for o proper translation? 1 Quote
jatar Posted June 3, 2016 Report Posted June 3, 2016 (edited) Thanks birdy.dma, the injection of weather was good, without problems. We are using fsgrw in both. My english is worse than your jejejeje. Sorry for all people. Regards Edited June 3, 2016 by jatar Quote
cmbaviator Posted June 3, 2016 Report Posted June 3, 2016 1 hour ago, birdy.dma said: Good idéa.. I can also join a read_me in the .zip. I just need a help, as my English is sometimes unclear. cmbaviator are you with me for o proper translation? I can translate if you want Quote
birdy.dma Posted June 3, 2016 Author Report Posted June 3, 2016 5 hours ago, cmbaviator said: I can translate if you want Thank you. Just send you an email. Quote
Solex Posted June 4, 2016 Report Posted June 4, 2016 1.4.2 is not working for us. when we connect we get: Update failed: Different datarefs. Check aircraft version. 1.0.5 does connect, but with alot of problems. no power on electricals on the slave side and two minutes of clicking sounds. We do get it to work with FlyJsims aircraft. Any suggestions to get it to work? 2.05 version of Smartcopilot. Quote
speckfire Posted June 4, 2016 Report Posted June 4, 2016 (edited) Hi Birdie, like Solex version 1.0.5 connected fine for me but 1.4.2 is giving me an error " Update failed: Different datarefs. Check aircraft version. " and checking the smartpilot2.log I found the following "2016-04-06 17:22:31.209 WARN Can't find DataRef: ixeg/733/altimeter/baro_inhg_copilot_0001_ind" I am running Smartpilot v.2.05 Edited June 4, 2016 by speckfire Quote
birdy.dma Posted June 5, 2016 Author Report Posted June 5, 2016 6 hours ago, Solex said: 1.4.2 is not working for us. when we connect we get: Update failed: Different datarefs. Check aircraft version. 1.0.5 does connect, but with alot of problems. no power on electricals on the slave side and two minutes of clicking sounds. We do get it to work with FlyJsims aircraft. Any suggestions to get it to work? 2.05 version of Smartcopilot. 6 hours ago, speckfire said: Hi Birdie, like Solex version 1.0.5 connected fine for me but 1.4.2 is giving me an error " Update failed: Different datarefs. Check aircraft version. " and checking the smartpilot2.log I found the following "2016-04-06 17:22:31.209 WARN Can't find DataRef: ixeg/733/altimeter/baro_inhg_copilot_0001_ind" I am running Smartpilot v.2.05 Update failed: there is something different between your sims : 1.0.4 vs 1.0.5, X Plane 10.36 vs X Plane 10.45, xjoymap.ini vs no xjoymap.ini, lua script, or something else creating commands or datarefs. Can't find DataRef: this is only a warning in the log file Waiting for a readme included in the .zip, here is a checklist: Before the connection Same state of the plane. fuel, payload, CG, Cold and dark, Turn Around, Ready to fly. After the connection If cold and dark, don't use the carts, APU only. Elevator trim with joystick button only (no mouse). Airbrakes with mouse, joystick button, keyboard (no axis). Guards and gear door are not synchronized. Each pilot have to open/close them. smartco 1.4.3.zip 1 Quote
nstdeveloper Posted June 5, 2016 Report Posted June 5, 2016 1.0.5 not working synchronization CDU Perf page. Quote
cmbaviator Posted June 5, 2016 Report Posted June 5, 2016 1.4.2 is working like a charm for us CMB Sent from Tapatalk Quote
speckfire Posted June 5, 2016 Report Posted June 5, 2016 Thanks Birdie, we did try the same aircraft state, same airport and time. We will check again. Quote
AoA_22 Posted June 6, 2016 Report Posted June 6, 2016 Just wanted to share that I had a successful flight with another guy last night using the latest versions of the plane and SmartCopilot (1.4.2 and 2.05 respectively, I believe). Had some issues, but went mostly okay. Sorry, can't remember the details. Quote
Solex Posted June 8, 2016 Report Posted June 8, 2016 (edited) We (speckfire) both reinstalled X-plane and smartcopilot. - Using smartcopilot 2.05B, version 1.4.3 of birdy's .cfg. and IXEG-737 1.0.5. - I have X camera, Skymaxx 3.2 and Real Weather Connector. (all disabled) No plugins installed, same fuel state, 2992 barometer, cold and dark, weather, location on the map and livery. But we still get Update failed: Different datarefs. Check aircraft version. What are we doing wrong? 2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal 2016-08-06 15:49:59.588 INFO Configuration file loaded 2016-08-06 15:49:59.588 INFO Found: 1 CONTINUED integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 CONTINUED integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 30 CONTINUED float DataRef's 2016-08-06 15:49:59.588 INFO Found: 15 CONTINUED float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 CONTINUED string DataRef's 2016-08-06 15:49:59.588 INFO Found: 1 SEND_BACK integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SEND_BACK integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 9 SEND_BACK float DataRef's 2016-08-06 15:49:59.588 INFO Found: 6 SEND_BACK float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SEND_BACK string DataRef's 2016-08-06 15:49:59.588 INFO Found: 2 SLOW integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 4 SLOW float DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW string DataRef's 2016-08-06 15:49:59.590 INFO Found: 554 TRIGGER integer DataRef's 2016-08-06 15:49:59.590 INFO Found: 10 TRIGGER integer array DataRef's 2016-08-06 15:49:59.590 INFO Found: 551 TRIGGER float DataRef's 2016-08-06 15:49:59.590 INFO Found: 40 TRIGGER float array DataRef's 2016-08-06 15:49:59.590 INFO Found: 0 TRIGGER string DataRef's 2016-08-06 15:49:59.590 INFO Found: 0 CLICK DataRef's 2016-08-06 15:49:59.591 INFO Found: 66 COMMANDS 2016-08-06 15:49:59.591 INFO Found autopilot datarefs 2016-08-06 15:49:59.591 INFO Found: 6 OVERRIDE DataRef's 2016-08-06 15:49:59.591 INFO Connecting to - xx.xxx.160.243|56897 Edited June 8, 2016 by Solex Quote
speckfire Posted June 8, 2016 Report Posted June 8, 2016 The funny thing is when we select and share the default Baron via smartcopilot (which works fine) and then change planes to the IXEG737, we can connect ; but the cockpit is not 100% ie one pilot cannot see the flight director needles, auto throttle switches moving, or any autopilot selected lights. We even disabled the firewalls, anti virus programs and opened the ports for smartcopilot. Are there any other ports that need to be considered? Quote
birdy.dma Posted June 8, 2016 Author Report Posted June 8, 2016 3 hours ago, Solex said: We (speckfire) both reinstalled X-plane and smartcopilot. - Using smartcopilot 2.05B, version 1.4.3 of birdy's .cfg. and IXEG-737 1.0.5. - I have X camera, Skymaxx 3.2 and Real Weather Connector. (all disabled) No plugins installed, same fuel state, 2992 barometer, cold and dark, weather, location on the map and livery. But we still get Update failed: Different datarefs. Check aircraft version. What are we doing wrong? 2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal 2016-08-06 15:49:59.588 INFO Configuration file loaded 2016-08-06 15:49:59.588 INFO Found: 1 CONTINUED integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 CONTINUED integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 30 CONTINUED float DataRef's 2016-08-06 15:49:59.588 INFO Found: 15 CONTINUED float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 CONTINUED string DataRef's 2016-08-06 15:49:59.588 INFO Found: 1 SEND_BACK integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SEND_BACK integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 9 SEND_BACK float DataRef's 2016-08-06 15:49:59.588 INFO Found: 6 SEND_BACK float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SEND_BACK string DataRef's 2016-08-06 15:49:59.588 INFO Found: 2 SLOW integer DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW integer array DataRef's 2016-08-06 15:49:59.588 INFO Found: 4 SLOW float DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW float array DataRef's 2016-08-06 15:49:59.588 INFO Found: 0 SLOW string DataRef's 2016-08-06 15:49:59.590 INFO Found: 554 TRIGGER integer DataRef's 2016-08-06 15:49:59.590 INFO Found: 10 TRIGGER integer array DataRef's 2016-08-06 15:49:59.590 INFO Found: 551 TRIGGER float DataRef's 2016-08-06 15:49:59.590 INFO Found: 40 TRIGGER float array DataRef's 2016-08-06 15:49:59.590 INFO Found: 0 TRIGGER string DataRef's 2016-08-06 15:49:59.590 INFO Found: 0 CLICK DataRef's 2016-08-06 15:49:59.591 INFO Found: 66 COMMANDS 2016-08-06 15:49:59.591 INFO Found autopilot datarefs 2016-08-06 15:49:59.591 INFO Found: 6 OVERRIDE DataRef's 2016-08-06 15:49:59.591 INFO Connecting to - xx.xxx.160.243|56897 3 hours ago, speckfire said: The funny thing is when we select and share the default Baron via smartcopilot (which works fine) and then change planes to the IXEG737, we can connect ; but the cockpit is not 100% ie one pilot cannot see the flight director needles, auto throttle switches moving, or any autopilot selected lights. We even disabled the firewalls, anti virus programs and opened the ports for smartcopilot. Are there any other ports that need to be considered? Here is the problem: 2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal I am out of ideas. Check your version of the plane, and of course the smartcopilot file. You must have the exact same file. Smartco read the DataRefs.txt and the Commands.txt (In Ressources / Plugins). They should not be different, but, in case, delete them (back up), and launch the updater. It will recreate them with a fresh copy from Laminar. But, as the Baron is OK,, and nobody modify those files, there will be probably no difference. Quote
speckfire Posted June 8, 2016 Report Posted June 8, 2016 Thanks for your input Birdie, the only thing I forgot to mention is that our version of X-plane runs from Steam if that makes a difference. Quote
birdy.dma Posted June 8, 2016 Author Report Posted June 8, 2016 37 minutes ago, speckfire said: Thanks for your input Birdie, the only thing I forgot to mention is that our version of X-plane runs from Steam if that makes a difference. I don't know. We could may be find something in your logs.txt. Post both. Quote
birdy.dma Posted June 9, 2016 Author Report Posted June 9, 2016 New files available in the first post. 1 Quote
speckfire Posted June 10, 2016 Report Posted June 10, 2016 Hi Birdie, I'll post the txt files as soon as I can. Also I am going to test with V 1.3 of simcopilot to see if it makes a diff. My test buddy will be away for a week so I'll have to wait. Quote
jatar Posted June 10, 2016 Report Posted June 10, 2016 Hi Birdi.dma I have tried today v 1.4.4 and all ok but: - Emegency lights don´t sync -PFD and SFD of PF don´t sync in view of PNF - PNF can´t activate AP Thanks for your work. Quote
jatar Posted June 12, 2016 Report Posted June 12, 2016 With second flight, I did pause and I lost sync with my partner. If any change to LVL change, he changes but the other do not. If I go back to VNAV the other continues in LVL CHANGE. Thanks Quote
birdy.dma Posted June 12, 2016 Author Report Posted June 12, 2016 2 hours ago, jatar said: With second flight, I did pause and I lost sync with my partner. If any change to LVL change, he changes but the other do not. If I go back to VNAV the other continues in LVL CHANGE. Thanks Hi jatar, If connection is lost (a quirk of internet), quickly pause both sims. Try to reorder you pits (fms, mcp etc), connect and leave the pause. If you are lucky, you will land. If not, it will be a disaster movie. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.