FloB Posted October 4, 2013 Report Posted October 4, 2013 (edited) http://developer.x-plane.com/ Go nag him... Edited October 4, 2013 by FloB Quote
BWolf7 Posted October 4, 2013 Report Posted October 4, 2013 Guess that means the 757... too bad I was banned just in time Videos from ramzzess also. Its confirmed! Quote
Goran_M Posted October 5, 2013 Report Posted October 5, 2013 Guess that means the 757... too bad I was banned just in time Videos from ramzzess also. Its confirmed! So you were "dolanfish"? Quote
BWolf7 Posted October 5, 2013 Report Posted October 5, 2013 (edited) So you were "dolanfish"?No. I am BWolf7 there... Edit- Well I am technically not banned... just perm mod queue. I have no rights, I cannot post anything, all content is censored. But at least I am a member! Edited October 5, 2013 by Ben Wolf Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 I will only take care of 10.30It depends ... if you are interested in DSF re-cuts, especially my upcoming HD Mesh Scenery v2 (in about 4-6 weeks), then you might be interested in 10.25 (as its a prerequisite) ... 1 Quote
Cameron Posted October 5, 2013 Report Posted October 5, 2013 It depends ... if you are interested in DSF re-cuts, especially my upcoming HD Mesh Scenery v2 (in about 4-6 weeks), then you might be interested in 10.25 (as its a prerequisite) ... Hey, Andras, Forgive my ignorance here...but how much coverage will be in this V2 cut in 4-6 weeks? Quote
Hueyman Posted October 5, 2013 Report Posted October 5, 2013 It depends ... if you are interested in DSF re-cuts, especially my upcoming HD Mesh Scenery v2 (in about 4-6 weeks), then you might be interested in 10.25 (as its a prerequisite) ... No, I'm interested in new features regarding some engine parameters we talked about with Austin, as well as other things ... not really ground textures Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 (edited) Hey, Andras, Forgive my ignorance here...but how much coverage will be in this V2 cut in 4-6 weeks?Hi Cameron, I have listed it some time ago here http://forums.x-pilot.com/topic/5341-x-plane-10-hd-mesh-v2-preview/ Effectively (to bring it up to date), I expect to cover this:USA (complete)Canada (I think everything south of 60N ... the rest I will decide on case-by-case basis)AlaskaEurope (complete)And this will bring us already somewhere around 60-80 GBytes I think .... Edited October 5, 2013 by alpilotx 1 Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 No, I'm interested in new features regarding some engine parameters we talked about with Austin, as well as other things ... not really ground texturesThen you are correct in saying, 10.25 is not so much for you (but neither would it hurt). Quote
Cameron Posted October 5, 2013 Report Posted October 5, 2013 I have listed it some time ago here Hi, Andras, I do remember this post, but to confirm, you plan to have all listed coverage complete by the date specified, or is this going to be rolling out in phases? Really looking forward to it! Quote
Hueyman Posted October 5, 2013 Report Posted October 5, 2013 (edited) Then you are correct in saying, 10.25 is not so much for you (but neither would it hurt).Probably, but will give it a try for sure ;-) Edited October 5, 2013 by Hueyman Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 I am planning to release it all at once (more or less ... I hope more) .... at least thats my current plan.But neither is this a small/easy thing - as you can imagine - which includes many hundred hours of computation time and also managing the roll out itself is not simple (bringing 60-80 Gbytes on the net is still not a trivial task). 1 Quote
Carlos Garcia Posted October 5, 2013 Report Posted October 5, 2013 Effectively (to bring it up to date), I expect to cover this:USA (complete)Canada (I think everything south of 60N ... the rest I will decide on case-by-case basis)AlaskaEurope (complete)And this will bring us already somewhere around 60-80 GBytes I think .... Can I ask for South America ? Gracias Carlos 1 Quote
marty2756 Posted October 5, 2013 Report Posted October 5, 2013 Can I ask for South America ? Gracias Carlos Alpilotx: I know it won't be in the next update South America... but would it be possible to do in the future ? is it a matter of work or you don't have the 'source' data to do it? Thanks for your big contribtion to x-pane Quote
frankbyte Posted October 5, 2013 Report Posted October 5, 2013 Hi Cameron, I have listed it some time ago here http://forums.x-pilot.com/topic/5341-x-plane-10-hd-mesh-v2-preview/ Effectively (to bring it up to date), I expect to cover this:USA (complete)Canada (I think everything south of 60N ... the rest I will decide on case-by-case basis)AlaskaEurope (complete)And this will bring us already somewhere around 60-80 GBytes I think ....Hi altpilotx Since you know a lot about scenery and textures, do you think it would be possible in future to have a complete world-coverage of "scenerys", that means also for areas north of N60 and around the Northpol? It hasn't to be necessary high-resolution, but it would be very cool having scenerys when flying there (for example for flights beetween Anchorage and Europe). Thanks and cheersF. Quote
JohnMAXX Posted October 5, 2013 Report Posted October 5, 2013 Im really excited to see what has been done with the urban textures.... Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 (edited) About South America: well, there are two important aspects here.First, it adds to the already extreme amount of scenery I try to distribute here (remember, that the announced coverage will already wigh in around 60-80 Gbytes!) ... South America would for sure add another 20-40 Gbytes.Second, yes, there is a data "problem" with South America : I do not have higher resolution, good quality landclass data for that region (until now) ... only the - for now - standard 300m res data I use worldwide (where I have no better data). Whereas Europe/USA/Alaska/(and from now on) Canada do all have good, highres landclass data. Now, of course its possible to do the HD mesh with low res landclass data too, its just that it makes much much less nice difference (and improvements) there ... also the OSM data - until now - is not at a level like in the above regions (again, much, better, etc. OSM data also helps to improve things).For this reason, I would NOT promise anything about South America. BUT, this doesn't mean that - like always - I don't continue to look for possible improvements! And when I find something which is worth the efforts, I will let you know (but at least until now, there is nothing to "talk" about) ... Edited October 5, 2013 by alpilotx Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 Hi altpilotx Since you know a lot about scenery and textures, do you think it would be possible in future to have a complete world-coverage of "scenerys", that means also for areas north of N60 and around the Northpol? It hasn't to be necessary high-resolution, but it would be very cool having scenerys when flying there (for example for flights beetween Anchorage and Europe). Thanks and cheersF.We do already go up to over 70N (Norway is completely covered and Alsaka too). This will be the case with my HD Mesh Scenery v2 too ... only in Canada I might be a bit selective, as there is a wast, extensive area north of 60N, which has not so much details and wouldn't profit much from HD Mesh. And about polar regions, no, I don#t have to extend up there ... and also the scenery engine - using a classic "WGS84 Geographic Lat/Lon" - would have quite some trouble the closer you come to the poles (which you can easily imagine, if you know a little bit about projection systems ) Quote
AtomicFrawg Posted October 5, 2013 Report Posted October 5, 2013 I have always been a fan of alpilotx's work. @alpioltx - will I need to delete the your old mesh's? 1 Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 I have always been a fan of alpilotx's work. @alpioltx - will I need to delete the your old mesh's?Yes, this will be a complete replacement .... (and after it, you will - I think - not want to go back ) 1 Quote
AtomicFrawg Posted October 5, 2013 Report Posted October 5, 2013 Yes, this will be a complete replacement .... (and after it, you will - I think - not want to go back )Oh no sure would not.... But that being said. Its already amazing. I can't wait to see what this will look like. Quote
frankbyte Posted October 5, 2013 Report Posted October 5, 2013 (edited) We do already go up to over 70N (Norway is completely covered and Alsaka too). This will be the case with my HD Mesh Scenery v2 too ... only in Canada I might be a bit selective, as there is a wast, extensive area north of 60N, which has not so much details and wouldn't profit much from HD Mesh. And about polar regions, no, I don#t have to extend up there ... and also the scenery engine - using a classic "WGS84 Geographic Lat/Lon" - would have quite some trouble the closer you come to the poles (which you can easily imagine, if you know a little bit about projection systems )Sorry i meant north of N70 and not 60 of course. Ok so it has to do with the projection systems, yes, this is understandable now... In fact X-Plane should be able to deal with the polar-projection-grid to show it at the right place, perhaps this will be once possible, would be nice ;-) Edited October 5, 2013 by frankbyte Quote
JohnMAXX Posted October 5, 2013 Report Posted October 5, 2013 Oh yeah I had nothing to do with textures guys.......Im just excited to see the new approach to urban stuff..... Quote
alpilotx Posted October 5, 2013 Report Posted October 5, 2013 Hi John ... here I have a first teaser for you from Seattle (disclaimer: it might look like this later or not) ... the magic with the new urban textures is especially tweaked for the "distant view" which now looks much better than before. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.