Hueyman Posted December 9, 2013 Report Share Posted December 9, 2013 Thanks Pete ! Quote Link to comment Share on other sites More sharing options...
vsully Posted December 9, 2013 Report Share Posted December 9, 2013 YYEEEAAAH!! Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 15, 2013 Author Report Share Posted December 15, 2013 Sunday Beaver Update 2 Hi all, Here I am for another Sunday Beaver update. This week was mainly spent on the external aircraft model and textures and systems coding and prototyping. The external model high resolution color, spec and normal maps are finished and the Beaver is about to get the first livery. I should be able to show this very soon. Besides that, I made progress on the coding side, but had to do a few things again, as I was not happy with the initial overall result, but I am getting there. No worries! During the next days or maybe in a week, I want to talk a little bit about the Beaver release and my plans for this aircraft. I hope you will like what I am going to say. Especially the people who love this aircraft like I do. Not a lot of text today, but more will follow soon. I have the feeling though that you would enjoy a few new pictures. So here they are and I hope you like them... 9 Quote Link to comment Share on other sites More sharing options...
T50 Posted December 15, 2013 Report Share Posted December 15, 2013 Are you planning to advanced An-2 like systems (start-up, engine and electric failures, radios, gyroscope drift simulation ect.)? 2 Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 15, 2013 Author Report Share Posted December 15, 2013 Yes I do! 2 Quote Link to comment Share on other sites More sharing options...
canox Posted December 15, 2013 Report Share Posted December 15, 2013 SoulMade Simulations DHC-2 Beaver "The Best Bush Plane Ever Built" From an exhibit at local museum.. I love the paint on this one. (hint)http://wcam.mb.ca/940/de-havilland-dhc-2-beaver/ Updates look awesome! Quote Link to comment Share on other sites More sharing options...
Xflyboy Posted December 15, 2013 Report Share Posted December 15, 2013 Thanks Pete! Quote Link to comment Share on other sites More sharing options...
Zach Decou Posted December 16, 2013 Report Share Posted December 16, 2013 I like your use of ambient occlusion seen in these images. I prefer AO a little on the heavy side. You could almost feel the grime on your fingertips if you run your hand across the skin. Nice screenshots! Sunday Beaver Update 2 Hi all, Here I am for another Sunday Beaver update. This week was mainly spent on the external aircraft model and textures and systems coding and prototyping. The external model high resolution color, spec and normal maps are finished and the Beaver is about to get the first livery. I should be able to show this very soon. Besides that, I made progress on the coding side, but had to do a few things again, as I was not happy with the initial overall result, but I am getting there. No worries! During the next days or maybe in a week, I want to talk a little bit about the Beaver release and my plans for this aircraft. I hope you will like what I am going to say. Especially the people who love this aircraft like I do. Not a lot of text today, but more will follow soon. I have the feeling though that you would enjoy a few new pictures. So here they are and I hope you like them... Quote Link to comment Share on other sites More sharing options...
pryoski Posted December 17, 2013 Report Share Posted December 17, 2013 Things a looking great! Very interested in this one. Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 18, 2013 Author Report Share Posted December 18, 2013 Just wanted to share a mid week screenshot. It shows the view control of the Beaver, which is now in place and properly working. I implemented an IFR view. Just in case the sky is falling down and you really need to focus on your flight instruments. You can select this view by using the View Control or to get there fast, you just have to click on the tail number plate. By clicking on it again, you go back to the default pilot view. This view is also handy if you just want to practice you IFR flying skills. 3 Quote Link to comment Share on other sites More sharing options...
Tom Knudsen Posted December 18, 2013 Report Share Posted December 18, 2013 Nice<br /><br /><br />Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Xflyboy Posted December 18, 2013 Report Share Posted December 18, 2013 Nice indeed, Thanks Pete! Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 18, 2013 Author Report Share Posted December 18, 2013 Just to give you a better feeling of what the views look like, I compiled a few shots. Internal Views External Views 6 Quote Link to comment Share on other sites More sharing options...
ryancz Posted December 19, 2013 Report Share Posted December 19, 2013 Wow. That looks beautiful and very well done.I can't wait! Quote Link to comment Share on other sites More sharing options...
Cameron Posted December 19, 2013 Report Share Posted December 19, 2013 Nice work, Pete! This project has been a long time coming, and I remember you saying you had been building a framework for this, but looking at these screenshots it appears you have taken a different direction again and are perhaps using SASL now...is that correct? Just curious if you ran into some kind of stumbling blocks along the way that would provoke the change from binary to lua? Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 19, 2013 Author Report Share Posted December 19, 2013 Hi Cameron, Yes, it has been a long time coming, but life doesn't always go as planned and you have to keep in mind that I do all this beside a busy full time day job, family, baby and other constraints. So I am happy to have reached this stage so far, even by changing directions from time to time. It is my first aircraft and I guess this is natural, if you learn along the way. You are right, I built my own C++ framework for development, as I usually prefer to code in this language and it was working fine. However, I didn't like the pain to compile for three different platforms. I even bought a Mac Mini, just to be able to compile my code for the Mac, but I didn't like the idea to also install Linux as well, even I like to provide the Beaver to Linux users. So like I said, it was painful and the code turn around times, when I did a single code change became annoying. I know there are workarounds like having two folders of the same aircraft, where you just swap .xpl files etc., but also this was annoying. Another developer suggested SASL to me and gave me a short intro and after trying it, I was hooked. I could implement my code within minutes and now I can re-load my plugin on the fly, without stopping a running simulation. This allows rapid development, prototyping and testing. I know that SASL has its limitations with respect to OpenGL, but since I am not into developing airliners or heavy avionics cockpits, there is absolutely no need for me. SASL also makes it very easy for me to implement GUIs and I just love it that way. Code encryption, if required, is a piece of cake and I can do it myself and the support for all three platforms is important for me as well, because I don't want to close the door for anybody, even Linux users might be a minority. So no stumbling blocks. It was more a question of ease of use, a more rapid and streamlined development process, which is just fitting my specific needs and my own customer support. I still prefer C++ over Lua, but I can easily live with it. 6 Quote Link to comment Share on other sites More sharing options...
Cameron Posted December 19, 2013 Report Share Posted December 19, 2013 Good stuff! Thanks! Quote Link to comment Share on other sites More sharing options...
79carboy Posted December 21, 2013 Report Share Posted December 21, 2013 Great to see all these pictures. Keep up the amazing work. Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 22, 2013 Author Report Share Posted December 22, 2013 Sunday Beaver Update 3 Hello, It is Sunday and time for another update. As you know, I created the View Control System for the Beaver this week and I hope you enjoyed the screenshots so far. In addition, I continued with systems coding and the animations of the external model. The first livery is still WIP, but hopefully I can show something soon. Besides all the technical stuff, I would like to talk about the Beaver release today, and I can imagine that a few of you are interested in this. The full modernized Beaver package will include the regular tire version, the cargo version with bush tires and cargo door with the corresponding interior and the amphibious version. As I know a lot of you are really waiting for the release, I came up with a release strategy and it will be a two step release. The first release will be the regular tire version only, but of course it will have all the features and will have gone through the full test cycle. So don't expect a degraded version. It will be full payware quality! The second release will be the full package, with all the version mentioned above. I chose this approach, because I would like to get the Beaver into your hands as soon as possible and I don't want you to wait until the full package is finished. I know a lot of you are waiting for this aircraft and I want to give it to you. Again, it will be fully developed and tested and at the moment, I just concentrate on the regular tire version. The one you have seen in the recent screenshots. It will come with three liveries and a blank exterior texture, so you are able to create your own liveries. I hope that nobody is disappointed by "just" getting only one version at the beginning. Well, most payware aircraft just come with a single version. The full Beaver package will have 3 different versions in the end. Now, I would like to give a few more details on the pricing: ============================================================ Step 1The regular tire version for a price of $24.95 Step 2The full package, including all three versions mentioned above for a price of $34.95 ============================================================ As soon as the full package is available, the single version of Step 1 won't be available anymore. Customers can then only buy the full package. Launch customers who bought the Beaver of Step 1 will be able to upgrade to the full package of Step 2, for $5. So they pay $29.95 for a high quality aircraft which comes with three different versions, instead of $34.95. I really hope that you are happy with this approach and I think it is fair! Now we come to the release date: ============================================================Step 1The regular tire version will be available in Spring 2014 Step 2The full package, including all three versions mentioned above will be available 2-3 months after Step 1 ============================================================ So here you have all the details and in the coming weeks, we can purely focus on the technical updates again. You all have a great Sunday and of course a Merry Christmas! 11 Quote Link to comment Share on other sites More sharing options...
Xflyboy Posted December 22, 2013 Report Share Posted December 22, 2013 That a nice deal Pete! Thanks. Quote Link to comment Share on other sites More sharing options...
ointment Posted December 22, 2013 Report Share Posted December 22, 2013 Giddyup!!! Great plan, Pete! Quote Link to comment Share on other sites More sharing options...
pryoski Posted December 23, 2013 Report Share Posted December 23, 2013 Standing by Pete! Quote Link to comment Share on other sites More sharing options...
Hueyman Posted December 24, 2013 Report Share Posted December 24, 2013 I don't know why but I feel I'll fall in love with the Beaver, while I don't care about it for the moment Quote Link to comment Share on other sites More sharing options...
79carboy Posted December 25, 2013 Report Share Posted December 25, 2013 Sounds like a great release plan Quote Link to comment Share on other sites More sharing options...
Pete_SMS Posted December 29, 2013 Author Report Share Posted December 29, 2013 Sunday Beaver Update 4 Hi all, Well most of the week was spent with celebrating Christmas and spending time with family. However, the first high quality livery of the regular tire version was finished and you will see it in the screenshots below. Also more progress on external animations and some code. I decided to focus more on 3D and animations right now, and once everything is in place, I will continue with the more technical stuff like flight modeling and coding. Next, you should see some light texturing for the cockpit and interior. So stay tuned and I hope you enjoy the pictures below. 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.