0321sjoerd Posted March 18, 2018 Report Posted March 18, 2018 Hello guys! First of all, thanks for releasing the XP11 compatibillity upgrade! With the X-Plane 11 version I run into a problem however... My navigation and radio's don't display correctly. I've included some screenshots and the log file. - I've tried changing some display settings in the graphic section of XP11, but no luck resolving this issue. (I've moved all the sliders to all available positions, but that didn't help...) - A full reinstall also didn't solve the problem... - I have no CTD's and the airplane itself is flyable, it's just not displayed in the way it is supposed to be... The strange thing is that I've had this airplane for quite some time and never had any problems using it. I've also flown the previous version in XP11, although it wasn't officially compatible, without any problems. I think there must be something wrong with the installation, but I can't figure it out. Any help is much appreciated! Regards, Sjoerd Log.txt Quote
Omarza Posted March 18, 2018 Report Posted March 18, 2018 I just thought I would mention that I have the same problem. Quote
JGregory Posted March 18, 2018 Report Posted March 18, 2018 Something has definitely gone wrong with your installation. Quote
SavageNachine Posted March 18, 2018 Report Posted March 18, 2018 (edited) The GPS won't power on. Log.txt Edited March 18, 2018 by SavageNachine Quote
birdy.dma Posted March 18, 2018 Report Posted March 18, 2018 16 minutes ago, SavageNachine said: The GPS won't power on. Log.txt Switch it ON! 1 Quote
JGregory Posted March 18, 2018 Report Posted March 18, 2018 @SavageNachine Please start a new thread if you are posting about a different problem than the one this thread is referring to. Quote
SavageNachine Posted March 18, 2018 Report Posted March 18, 2018 I'm sorry. I will in the future. Thank you birdy, it's been a while since I flew this aircraft. Quote
Airbusso Posted March 18, 2018 Report Posted March 18, 2018 (edited) Also on my plane the radios and the transponder on the pedestal of the passenger version is not displayed correctly. Within the cargo version the instruments are right. Repeated installation does not solve the problem. Nvidia 1080 / X-Plane 11.10 Airbusso Edited March 19, 2018 by Airbusso Quote
jerra Posted March 18, 2018 Report Posted March 18, 2018 (edited) I have the same issue with the graphics on the gps and radios. Works fine on the cargo version but the passenger variant is not working properly. Tried uninstalling and reinstall and it worked ok for the first couple of times I loaded the aircraft up so I thought it had fixed itself but when I loaded it a third time and every time after that it was messed up, same issue as reported above. I have an Nvidia 1080 and running the steam version beta which is 11.20. Edited March 18, 2018 by jerra Quote
0321sjoerd Posted March 19, 2018 Author Report Posted March 19, 2018 For what it's worth: I also have an Nvidia 1080. Quote
cavmaj Posted March 19, 2018 Report Posted March 19, 2018 My COM 1 radio on the pedestal and dash are both dark regardless of switch setting and the GPS goes dark after it completes the boot up sequence and I press enter. Issue occurs in all the variants of the aircraft. All other navigation and communication systems are working fine. Stephen Quote
Hardy Posted March 19, 2018 Report Posted March 19, 2018 Same problem here. In PAX version radios and gps is not showing correct, cargo version is ok. Another thing is, that I can't control prop levers with my throttle and the nosewheel steering does not work. Rudder works fine. Long story short: Can't get this bird off the ground without prop lever and without nosewheel steering. Please advice. Quote
JGregory Posted March 19, 2018 Report Posted March 19, 2018 4 minutes ago, hardy@no-parachute.one said: Another thing is, that I can't control prop levers with my throttle Please explain this. You should not be assigning your condition levers to an engine throttle axis! Quote
Hardy Posted March 19, 2018 Report Posted March 19, 2018 Ahm sry... was writing misleading bs. I have the throttle and prop assigned to two different axis on my stick. While the throttle is working fine, the prop lever does not move. Quote
JGregory Posted March 19, 2018 Report Posted March 19, 2018 You need to assign the left condition lever to Prop1 and the right condition lever to Prop2. Quote
Hardy Posted March 19, 2018 Report Posted March 19, 2018 (edited) Ok, that means I can move both power levers with one stick axis (default throttle one) but for the props I need two different axis although they are mostly used together. Let me say that this is weird. But I got it. However: what is about the nosewheel steering and the textures on radios and gps? [EDIT] Nosewheel steering solved. Damn, that knob is a bid fiddly to handle but finally i managed it. Edited March 20, 2018 by hardy@no-parachute.one Quote
JGregory Posted March 20, 2018 Report Posted March 20, 2018 (edited) 45 minutes ago, hardy@no-parachute.one said: Ok, that means I can move both power levers with one stick axis (default throttle one) but for the props I need two different axis although they are mostly used together. Let me say that this is weird. But I got it. It's not weird, its just that the condition lever logic is much more complex than the throttles. With the next update you will be able to assign both condition levers to one axis. 45 minutes ago, hardy@no-parachute.one said: However: what is about the nosewheel steering and the textures on radios and gps? The nose wheel steering has been fixed and will be in the next update. We are still looking into the issue with the textures. There are other aircraft that have this problem as well, so it may be an X-Plane bug. What version of X-Plane are you running? Edited March 20, 2018 by JGregory Quote
Hardy Posted March 20, 2018 Report Posted March 20, 2018 11.11r2 First time ever I experienced such a strange behaviour with textures. And as I said - it's only with the PAX version, CARGO version is fine. So I'll take the cargo version as long as this issue exists. I appreciate the update for the condition levers - thanks for that one. Quote
Cameron Posted March 20, 2018 Report Posted March 20, 2018 20 minutes ago, hardy@no-parachute.one said: First time ever I experienced such a strange behaviour with textures. And as I said - it's only with the PAX version, CARGO version is fine. So I'll take the cargo version as long as this issue exists. Turn ON texture compression in your X-Plane rendering settings and restart X-Plane. Leaving texture compression off is a waste of resources, for what it's worth. Quote
Hardy Posted March 21, 2018 Report Posted March 21, 2018 On 20.3.2018 at 2:02 AM, Cameron said: Turn ON texture compression in your X-Plane rendering settings and restart X-Plane. Leaving texture compression off is a waste of resources, for what it's worth. If you mean that the Texture Quality in Graphis settings is set to Maximum but not to Maximum (without compression) this is exactly my setting. Nevertheless it should work even with Texture Quality set to Maximum (without compression), shouldn't it? Quote
0321sjoerd Posted March 24, 2018 Author Report Posted March 24, 2018 (edited) On 20-3-2018 at 2:02 AM, Cameron said: Turn ON texture compression in your X-Plane rendering settings and restart X-Plane. Leaving texture compression off is a waste of resources, for what it's worth. Sorry for the late reply, but I had a busy week at work. Did some testing this morning with the following results: - With texture compression ON I have no problems with the display and the problem in my opening post is solved. - With texture compression OFF I have the problem mentioned in the opening post in the passenger version, but not in the cargo version. So thanks for the help, but it still puzzled me why it gives problems in one version and not in the other... Therefore I did some deeper searching and I've noticed that in the passenger version there is a difference in the folders when compared to the Airborne and Cargo variants... In the Objects folder of the Passenger version there is a subfolder called 'Garmin and Radios'. That folder doesn't exist in the other variants. Also, in the passenger version there is a file called 'G530 2' that doesn't exist in the other versions. Could this have anything to do with the problem? Edited March 24, 2018 by 0321sjoerd added extra information Quote
Cameron Posted March 24, 2018 Report Posted March 24, 2018 We know how to solve the problem and have for the next update. For now just follow as suggested 1 Quote
0321sjoerd Posted March 26, 2018 Author Report Posted March 26, 2018 On 23-3-2018 at 6:18 PM, Cameron said: We know how to solve the problem and have for the next update. For now just follow as suggested Roger, wilco! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.