deimos256 Posted August 15, 2017 Report Posted August 15, 2017 I believe I have isolated where the stutters are coming from, I went through the whole process starting from cold and dark and got the IRS's aligned, route entered and checked, everything except starting the engines. At this point no pauses, as soon as I started the first engine the pauses began. This behavior is isolated to this addon specifically, and quite frankly I have to shelf it until the issue is addressed, which is a shame because this has been my favorite addon since the release. 1 Quote
crisk73 Posted August 15, 2017 Report Posted August 15, 2017 I believe the plane is flyable with the microstutters, just during on ground taxiing it is a little bit more noticeable. Devs are working on the issue and I'm sure they will find the way to sort it out. Quote
deimos256 Posted August 19, 2017 Report Posted August 19, 2017 Well if I set my Vsync to Adaptive, Half Refresh rate in Nvidia control panel it externally locks the frame rate to 30 and the pauses go away. Not a fan of flying at 30 fps when I typically get 60 but at least I can use the 733 again. Quote
Jens W. Posted August 29, 2017 Report Posted August 29, 2017 Hi all, I get micro stutters too, especially on ground while taxing they are noticeable. X-Plane 10 is running on an i7-4790K CPU @ 4.00GHz with a GTX 970. No stutters with other planes. Today I have installed X-Plane on Linux (same machine) to test if the stutters are related to Windows 10. First I DID NOT apply the workaround (copy NavData to Navdata) to fix this error: error: 55.532: Run(timer): fmc_delayed_reset: [string "ixeg.733.fmc.gui.lua.ra1"]:1217: attempt to index local 'file' (a nil value) error: 58.464: Run(timer): fmc_periodic: [string "ixeg.733.fmc.gui.lua.ra1"]:1217: attempt to index local 'file' (a nil value) Yep, and I was very happy: No stutters! I could taxing and flying very smoothly. After fixing this issue: I've got the same stutters as on Windows :-( Question is: Can this FMC script be the source of the stutters? Best Jens P.S: If you need further help (testing patches), let me know! Quote
Ben Russell Posted August 29, 2017 Report Posted August 29, 2017 1 hour ago, Jens W. said: Hi all, I get micro stutters too, especially on ground while taxing they are noticeable. X-Plane 10 is running on an i7-4790K CPU @ 4.00GHz with a GTX 970. No stutters with other planes. Today I have installed X-Plane on Linux (same machine) to test if the stutters are related to Windows 10. First I DID NOT apply the workaround (copy NavData to Navdata) to fix this error: error: 55.532: Run(timer): fmc_delayed_reset: [string "ixeg.733.fmc.gui.lua.ra1"]:1217: attempt to index local 'file' (a nil value) error: 58.464: Run(timer): fmc_periodic: [string "ixeg.733.fmc.gui.lua.ra1"]:1217: attempt to index local 'file' (a nil value) Yep, and I was very happy: No stutters! I could taxing and flying very smoothly. After fixing this issue: I've got the same stutters as on Windows :-( Question is: Can this FMC script be the source of the stutters? Best Jens P.S: If you need further help (testing patches), let me know! If you see any error you have no idea what the internal state of the systems are. It may be much more than those two files that failed to load, init and create workload. Sorry to say but these results are not much use at all. The problem is well understood already. If it was a simple one line fix it'd be done already. Quote
Jens W. Posted August 30, 2017 Report Posted August 30, 2017 Sure, I thought the causing part of the systems may be clearer (FMS) so you could step depper and debug to optimize the code. It would be so nice to have these stutters removed. Jens Quote
Ben Russell Posted August 30, 2017 Report Posted August 30, 2017 2 hours ago, Jens W. said: Sure, I thought the causing part of the systems may be clearer (FMS) so you could step depper and debug to optimize the code. It would be so nice to have these stutters removed. Jens It would be nice to have the systems stable too. There is little point optimizing things that Tom may re-write entirely. I have advised them on what I believe to be the cause, it's a "death by thousand cuts" thing. The Garbage Collector cycle adds up to a jittery amount of work. Quote
Jens W. Posted August 30, 2017 Report Posted August 30, 2017 Sounds good that you may have found the cause already Thanks to the whole team for the great user support! Best Jens Quote
Art Vandalay Posted September 1, 2017 Report Posted September 1, 2017 I know you might be bugged by this topic, but I have to second that the micro-stutters are a showstopper for me. I really LOVE! the IXGE, but this is something pulling down the overall experience. I did everything to get a smooth as possible experience with X-Plane, investing money and much time to spend on the "perfect" setup. Until now it has been worth the effort but the IXGE is the only aircraft which is able to stand up to these efforts. For me it´s a perfectly athmospheric and flyable aircraft in the current state if only the micro-stutters will be gone, so I would love to see this issue being worked on as high priority. Thanks and warm regards Art Quote
jack-daniels Posted September 10, 2017 Report Posted September 10, 2017 I was just going crazy, because of the sim freezes. I deactivated win defender weeks ago, but it did re-activate itself, so that the freezes drove me crazy. I know exlcude the XP folder, however, why can't you completely shutdown win defender ? Quote
mmerelles Posted September 10, 2017 Report Posted September 10, 2017 4 minutes ago, jack-daniels said: I was just going crazy, because of the sim freezes. I deactivated win defender weeks ago, but it did re-activate itself, so that the freezes drove me crazy. I know exlcude the XP folder, however, why can't you completely shutdown win defender ? Due to microsoft policy, they will keep enabling it during updates, etc. If you want to forget about the thing, simply put the folder exemption for the entire /xplane 11/ folder. 2 Quote
jack-daniels Posted September 10, 2017 Report Posted September 10, 2017 Ok thanks you - not microsoft ;-) - I've now excluded the entire XP folder! 1 Quote
marvinlbjr Posted September 14, 2017 Report Posted September 14, 2017 Thank you very much for this post Sir, We all needed this issue solved, thank you once again. Love the aircraft, one question before I sign off. When is there going to be an update to the aircraft so that the doors can open using the pop up window in the 733? Quote
Litjan Posted September 15, 2017 Report Posted September 15, 2017 8 hours ago, marvinlbjr said: Thank you very much for this post Sir, We all needed this issue solved, thank you once again. Love the aircraft, one question before I sign off. When is there going to be an update to the aircraft so that the doors can open using the pop up window in the 733? Hard to say - it depends on the rest of the interior to be updated in 3D. My hope is for 1.3 (there should be a sooner interim bugfix-patch 1.21, though). Cheers, Jan Quote
GusRodrigues Posted November 27, 2017 Report Posted November 27, 2017 On 8/31/2017 at 5:36 PM, Art Vandalay said: I know you might be bugged by this topic, but I have to second that the micro-stutters are a showstopper for me. I really LOVE! the IXGE, but this is something pulling down the overall experience. I did everything to get a smooth as possible experience with X-Plane, investing money and much time to spend on the "perfect" setup. Until now it has been worth the effort but the IXGE is the only aircraft which is able to stand up to these efforts. For me it´s a perfectly athmospheric and flyable aircraft in the current state if only the micro-stutters will be gone, so I would love to see this issue being worked on as high priority. Thanks and warm regards Art Dear Architect, try this solution: Quote
AlphaIndiaRomeo Posted February 10, 2018 Report Posted February 10, 2018 Hi everyone, Sorry to bring back this issue! I just purchased the IXEG 737 and have the same issue as mentioned above. However, I don't use an external hard drive. I have X-Plane 11 installed on a Western Digital WD10 Blue 7200RPM so the external hard drive isn't an issue. Moreover, I don't have any anti-virus or Windows Defender active. I've been trying this flight for the past two nights where I take off from KBOS and fly into KPHL and mid-flight, when I go and select my STAR as well as approach, the sim starts freezing every other second. The more I use the FMS, the more the freeze. I don't have this problem otherwise, that is, if I don't go in the FMS and play with it mid-flight. Routing: SSOXS5 SSOXS BUZRD SEY J121 BRIGS VCN9 Quote
AlphaIndiaRomeo Posted February 11, 2018 Report Posted February 11, 2018 Hi all! Just tested that flight again and it is as soon as I select the STAR that it starts to freeze... It's quite annoying! Quote
mmerelles Posted February 11, 2018 Report Posted February 11, 2018 19 minutes ago, AlphaIndiaRomeo said: Hi all! Just tested that flight again and it is as soon as I select the STAR that it starts to freeze... It's quite annoying! It really sounds like you are still running windows defender or something. be adviced when you reload the computer or update it reactivates if you turned it off. Microsoft is very strict on this. Are you windows? Can you try setting a folder exemption for entire /xplane 11/ folder? When the problem occurs, if you open task manager, is the CPU overloaded? and what process? 1 Quote
rileyr00 Posted February 20, 2018 Report Posted February 20, 2018 Hi can anyone help? I downloaded new verison and have never experienced this before in previous releases? fps are around 60 taxi to runway the minute I lift off the ground the sim pauses and the it goes down to 1fps? Quote
Litjan Posted February 20, 2018 Report Posted February 20, 2018 Never heard of this so far - lets see if other reports crop up. Do you have a modified route on the FMS (not executed)? Cheers, Jan Quote
rileyr00 Posted February 21, 2018 Report Posted February 21, 2018 17 hours ago, Litjan said: Never heard of this so far - lets see if other reports crop up. Do you have a modified route on the FMS (not executed)? Cheers, Jan Cheers yeah odd. i have never had this problem before. I found this thread Im gonna try and update gizmo Quote
Litjan Posted February 21, 2018 Report Posted February 21, 2018 Yeah, and it may be worth checking if you have antivirus software running that could interfere with the FMS computations. There is some of that going on starting at lift-off, and you may have modified the routing/performance calculation unknowingly (like entering a new weight) and not executing it. So the FMS is constantly recalculating the modified routing. If antivirus checking interferes with this, the slowdown happens. I know many people are VERY worried about disabling live antivirus checking, and they frown upon excluding a folder from checking, but it may be worth just trying to test if that is the cause. We are still looking at options to remove this adverse effect of database accessing. Cheers, Jan Quote
Syl20 Posted February 22, 2018 Report Posted February 22, 2018 (edited) Hello, I have made some tests tonight and can see that, when using IXEG plane, the framerate has a kind of "heart beat" of 1 second. Each second the framerate drops about 20fps (50fps ->30fps) for a short time and go back to normal again. I have also tested with standard xplane airplane, with same configuration, and cannot see any "heart beat". The first picture is for a standard cessna and the second is the IXEG. I still use IXEG v1.2. My computer is far from having 100% utilization (both CPU & GPU), so I do not believe that this is the root cause. Has anyone else seen this behaviour, and maybe found a solution to improve this? Cheers Sylvain Edited February 22, 2018 by Syl20 Quote
crisk73 Posted February 23, 2018 Report Posted February 23, 2018 Hi, that's a known issue since the very first release. See a dedicated thread in the FAQ section. It seems like it depends on the way Gizmo manages the Lua garbage collector. More or less noticeable depending on specific rig configurations. The developers are aware of it and said that there is room for improvement over the next releases. FYI - take it as a workaround - using v-sync adaptive mode half refresh rate seems to mitigate or even eliminate the effect. 1 Quote
Ben Russell Posted February 23, 2018 Report Posted February 23, 2018 31 minutes ago, crisk73 said: Hi, that's a known issue since the very first release. See a dedicated thread in the FAQ section. It seems like it depends on the way Gizmo manages the Lua garbage collector. More or less noticeable depending on specific rig configurations. The developers are aware of it and said that there is room for improvement over the next releases. FYI - take it as a workaround - using v-sync adaptive mode half refresh rate seems to mitigate or even eliminate the effect. For the sake of clarity, it's not how Gizmo manages the GC. It's how the IXEG systems scripts choose to use memory and/or CPU resources. For example, this has no such effect on the Saab systems. Cheers... 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.