Cameron

Hello All, This will serve as a formal forum announcement that we have released the version 1.1.1 update for the TBM 900. All customers who have purchased the TBM 900 up till now have been sent an e-mail by X-Aviation with complete instructions on how to obtain your update. We have made this a very simple process! For those that purchase the TBM 900 from today forward, your purchased download will already be updated to version 1.1.1 for you. What if I didn't get the update e-mail? If you did not receive your update e-mail don't fret! X-Aviation has updated our system to allow all customers to update with ease, regardless of whether you received an e-mail for the update! Here's what to do: 1. Login to your X-Aviation account here: https://www.x-aviation.com/catalog/account_history.php 2. Find your original TBM 900 download and re-download the file. It will download as the latest version! The following is a list of additions/fixes included: What's New / Changed: Deleted prop stripes from 1 side of blades Re-added pens on glareshield Fixed multi-monitor issues with sidebar drawer positioning and screen flicker Flightlog was storing altitude as meters instead of feet Flight recovery with engine running was broken Implemented X-IvAp COM2 workaround. Added disabling of COM1/2 on initial load Landing lights were on with no power Reflection light source for standby instrument on the glareshield needs to be animated GASC cabin rate should be higher, seen up to 890 ft/min IRL Small VRAM memory leak fixes Implemented custom logging facility to capture crash dumps without overwriting them Flightlog units were incorrect for GPS alt and waypoint distance Position restore would incorrectly place aircraft into the air when ground lowered due to terrain flattening settings change or change in scenery Bad unit conversion would produce spurious terrain alerts on landing at high-altitude airports Increased RTC/ITI runway distance inhibit threshold to allow for approaches into runways with close-by terrain. Airportdb could leak open file descriptors Possible use-after-free of runway data in runway data update As always, thanks for being a customer with X-Aviation. We appreciate your feedback and support! Enjoy these latest updates, and stay tuned to the forum as we continually announce the latest happenings.

Hot Start has a discord. That is directly with Hot Start. Your comments are getting old here, Craig. Enough.

Yes he is.

Goran has been posting in this thread and is a developer of Hot Start. This is your one warning. Pull stupid stunts like this again and you're gone.

Whatever narrative makes you feel better I'm okay with.

Dang you're exhausting, Craig. You sure know how to make a simple thing complex. I've stated my points. You can try and argue them all you want, and dismiss the facts to please your theory. I'm done with the subject. What I have said stands. Now you know, and I'm pleased to see others don't seem to have the same issue you do interpreting and following those guidelines.

"If you have any questions, post them on the X-Pilot.com forums at the following web address." - Hot Start Documentation Word emphasized. It's a pretty purposeful word! I'm sorry if that wasn't clear to you. How ridiculous! I like how you conveniently skipped the comment "the fix is coming VERY soon." Sounds pretty re-assuring as if someone knows what's going on to me! The initial intent was to point something out. You got defensive after that.

Not sure why you keep going on about Garmin or the manufacturer of the aircraft. Hot Start includes documentation with the product. It points out these forums. You've already been told in this thread that the team is working on it.

The documentation explicitly states support is through these forums only on this product. Sales and activation support is through the support ticket channel.

Already being created by Torquesim.

Because other people adding they have the same problem when we acknowledge it no longer makes our acknowledgment the last post. We're aware, and that's what matters. This thread will be locked too. Please do not try to create a separate thread again. It'll be removed the next time for keeping things clean and clear. Thanks!

It's supposed to do that. If you have installed liveries, or have certain after install files they will remain intact. ALL files that are a part of the original install will be removed.

Don't go there, please.

You asked and offered a suggestion as a "thought" of what you figured made sense. I gave you an answer. No need to pad responses with fluff. If you read it defensive that's you putting the thought in your own mind. It's just matter of fact.

Each installer is compiled to checksum and verify the encryption of each downloaded component for the installation. There's a valid reason and it's not changing.

Not yet. Still working it out. Thank you for your patience. We've had numerous internal discussions on it and are troubleshooting. News will be updated here when we have it!

Turning it off doesn't mean much. You need to fully remove the plugin before starting X-Plane.

What happens when you don't use Ultra Weather? Pretty sure they're messing with shaders.

Adding more detail on the pilot is not going to happen. Likewise, removing the pilot will not happen either. We used to not include pilots years ago. We got far too many requests and complaints for it, using the same argument you just did, but saying that it's not realistic to NOT see a pilot. I can see us creating a removal of the pilot in maintenance mode. Maybe something else option wise in the future, but for right now we have bigger fish to fry.

Yes, but back to my original discussion...you need to eject the old DMG file! If you don't know how to do that, do a Google search to learn. Sometimes restarting your Mac will do the trick too.

Considering 1.0.9 was out on Friday and you mentioned uninstalling a previous version, I'd say you had it.

Sounds like you did not eject the old 1.0.9 DMG file. You need to eject the DMG before using a new one.

Are you on a Mac?

Hello All, This will serve as a formal forum announcement that we have released the version 1.1 update for the TBM 900. All customers who have purchased the TBM 900 up till now have been sent an e-mail by X-Aviation with complete instructions on how to obtain your update. We have made this a very simple process! For those that purchase the TBM 900 from today forward, your purchased download will already be updated to version 1.1 for you. What if I didn't get the update e-mail? If you did not receive your update e-mail don't fret! X-Aviation has updated our system to allow all customers to update with ease, regardless of whether you received an e-mail for the update! Here's what to do: 1. Login to your X-Aviation account here: https://www.x-aviation.com/catalog/account_history.php 2. Find your original TBM 900 download and re-download the file. It will download as the latest version! The following is a list of additions/fixes included: What's New / Changed: Starter body should cool even with engine ties on. Timer system change on Windows broke state files which had timer rollover issues. Removed HDEF condition from GPS->LOC switchover. Massive refactoring of random failure code and cut sudden failures due to them being too frequent. Don't reset aircraft to cold & dark on smartcopilot connection in the air. As always, thanks for being a customer with X-Aviation. We appreciate your feedback and support! Enjoy these latest updates, and stay tuned to the forum as we continually announce the latest happenings.

Try running the installer as administrator.