Leaderboard

Landing Monitor XP12 – Version 1.0.3 Landing Monitor XP12 is a complete landing-analysis tool for X-Plane 12, designed to provide detailed touchdown, flare and rollout feedback after every flight. The plugin records the final approach from approximately 50 ft radio altitude, analyses the pilot’s longitudinal control input, detects the pre-flare and flare phases, identifies the landing runway, measures centerline performance and calculates a detailed Landing Score. It is intended for flight-simulation analysis and training. Main Features Real-Time Flight Data A configurable compact HUD displays: Total, longitudinal, lateral and vertical acceleration Maximum total acceleration IAS, TAS and groundspeed Pitch, roll, angle of attack and crab angle Thrust, drag, lift and aircraft weight Lift-to-weight and thrust-to-drag ratios Landing Monitor status Current script version Every item can be enabled or disabled independently. Detailed Touchdown Analysis After landing, the plugin records and displays: Landing rate Peak G Vertical impact energy Touchdown IAS and groundspeed Pitch, roll and angle of attack Crab angle Heading and track error Headwind and crosswind components Bounce count Runway and airport identification Distance from the runway threshold Signed centerline deviation in metres and feet Landing Score and Landing Quality Peak G is captured during the first 0.75 seconds following initial contact. Relative Flare and Pre-Flare Detection Version 1.0.3 introduces a fully relative flare-detection system based only on the filtered longitudinal joystick-deflection curve. The algorithm does not require a fixed joystick percentage and does not use pitch, vertical speed or angle of attack to validate the flare. FLARE is selected from the first ascending control-input phase reaching more than 80% of the maximum filtered joystick deflection recorded during that landing. PRE-FLARE is selected from the last earlier ascending phase reaching more than 50% of the same maximum. A relative slope check refines the effective beginning of the flare and prevents a long, nearly flat control-input section from placing the marker too early. This relative method allows the detector to adapt to aircraft requiring very different control-input amplitudes. Flare & Rollout Analysis Graphs The analysis window provides synchronized graphs for: Vertical speed to touchdown Filtered longitudinal joystick deflection Aircraft pitch Radio altitude Lateral deviation during rollout The graphs include clearly identified: PRE-FLARE marker FLARE marker TOUCHDOWN marker Airport and runway Detection thresholds and phase information Vertical speed and joystick data stop at touchdown, while pitch and radio-altimeter data continue for two additional seconds. Rollout deviation continues until 30 kt or until a runway exit is detected. Accurate Runway Selection The runway database respects the priority order defined in scenery_packs.ini. For each airport, the first enabled scenery providing physical runway data is retained, while lower-priority duplicate definitions are ignored. At touchdown, the plugin uses a geographic runway index and performs exact geometry calculations on no more than 24 nearby candidates. This avoids scanning the complete global runway database during landing and helps ensure that custom-airport geometry is used correctly. Revised Landing Score The Version 1.0.3 Landing Score is based on four categories: Centerline deviation: 30 points Flare or pre-flare score distance: 25 points Wind-aware crab angle: 20 points Peak G: 25 points Full centerline credit is awarded inside ±1 metre. The accepted crab-angle range changes according to the crosswind component: Crosswind below 5 kt: ±1° Crosswind from 5 to 15 kt: ±2° Crosswind above 15 kt: ±3° Landing Quality is based on Peak G rather than vertical speed. Landing rate remains displayed and logged but does not affect the score. Automatic Post-Landing Display When enabled, applying at least 50% parking brake after a finalized landing automatically opens: Landing Monitor Flare & Rollout Analysis The trigger reads two parking-brake DataRefs, stores the detected state and retries the deferred window-opening request until both windows are confirmed. The automatic display can be disabled in Settings without disabling monitoring, scoring, graph recording or CSV export. Independent Windows and Persistent Settings Three windows are controlled independently: Compact Real-Time HUD Landing Monitor Flare & Rollout Analysis All windows remain closed when X-Plane or FlyWithLua starts. Monitoring continues in the background. Display choices, HUD position, custom coordinates, CSV separator and the automatic parking-brake option are saved between sessions. Automatic CSV Logging Each completed landing is automatically saved to a per-aircraft CSV file. Version 1.0.3 uses: LandingLog_v9_<separator>_<aircraft>.csv The log includes touchdown data, runway and wind information, flare and pre-flare measurements, score-distance information, Peak-G-based Landing Quality and the final Landing Score. Requirements X-Plane 12 FlyWithLua NG A supported 64-bit operating system Write permission in the FlyWithLua Scripts folder Installation Close X-Plane 12. Copy: LandingMonitorFlareAnalysis_XP12_v1.0.3.lua into: X-Plane 12/Resources/plugins/FlyWithLua/Scripts/ Remove or archive previous Landing Monitor Lua versions. Start X-Plane. Open the FlyWithLua menu to access the Landing Monitor windows, settings and commands. When updating from an older version, the runway cache may be rebuilt automatically. Rebuild the runway database manually after changing scenery_packs.ini or installing a new airport scenery. What Is New in Version 1.0.3 New relative FLARE and PRE-FLARE detection Filtered joystick-deflection analysis Complete approach history retained below approximately 50 ft Effective flare-onset refinement using relative slope PRE-FLARE measurements and score-distance calculation Scenery-priority runway selection Version 2 runway cache Geographic runway index and limited local candidate search Peak-G-based Landing Quality Revised Landing Score Wind-aware crab-angle tolerance Full centerline credit inside ±1 metre Simplified filtered-joystick graph Script-version labels in all main windows Improved parking-brake automatic window opening Updated LandingLog_v9 CSV format Important Notice Landing Monitor XP12 is a flight-simulation analysis tool. It is not certified avionics and must not be used for real-world flight operations, aircraft maintenance or regulatory compliance.

VATSIM Real Data v1.0 is a compact X-Plane 12 plugin that displays live VATSIM and xPilot information directly inside the simulator, including radio status, nearby frequencies and the 10 closest aircraft. Full description VATSIM Real Data v1.0 adds a compact, customizable VATSIM information window to X-Plane 12. The plugin integrates with xPilot and displays your current connection status, callsign, nearby traffic, COM frequencies, microphone activity, SELCAL information and live VATSIM feed status. It also shows the five nearest VATSIM ATC frequencies and the ten closest aircraft, with useful flight and proximity information presented in a single readable table. Main features xPilot connection status and callsign TX and RX indicators COM1 and COM2 frequencies Active station callsigns Microphone level meter SELCAL status Five nearest VATSIM ATC frequencies Ten nearest VATSIM aircraft Aircraft callsign and type Departure and destination airports Bearing and horizontal distance Relative altitude Ground speed and altitude Reported COM1 frequency Automatic window resizing Fully configurable display from the X-Plane plugin menu Automatic settings saving Compact opaque interface designed for cockpit use Traffic proximity colors Nearby aircraft are color-coded using horizontal and vertical separation: Red: less than 3 NM and less than 1,000 ft vertical separation Amber: less than 6 NM and less than 2,000 ft vertical separation Green: all other traffic This feature is intended as a situational-awareness aid only. It is not a certified TCAS system. Customization Display options can be changed directly from: Plugins > VATSIM Real Data Sections, aircraft columns, aircraft count and frequency count can be enabled or disabled without restarting X-Plane. The window automatically adjusts its size and saves the selected settings. Installation Copy the complete folder: VatsimDataWindow into: X-Plane 12\Resources\plugins\ The final structure should be: X-Plane 12\Resources\plugins\VatsimDataWindow\64\win.xpl Restart X-Plane after installation. Requirements X-Plane 12 Windows 64-bit xPilot Internet connection for live VATSIM data Disclaimer VATSIM Real Data is an independent community plugin. It is not affiliated with, endorsed by or officially supported by VATSIM, xPilot or Laminar Research.