PX-NZ Posted April 24, 2016 Report Posted April 24, 2016 Hi PROBLEM: From my very first flight attempt yesterday everytime the IXEG 737 got its rear wheels off the ground, a black cmd.exe window would appear advising to press any key to continue. The simulator would pause until you cleared the command window. Clearing the first cmd.exe would simply open another, then another, and another with no end in site. You are forced to crash/kill X-Plane to break the cycle. Tried the trick of removing my preferences from output, disabling LUA, and even uninstalling and re-installing the 737. None of my other aircraft have this problem, and it happens for the 737 no matter what airport I am at. End result is that none of my 737 flights until just now had ever got more than 10ft off the ground at the end of Wellington Airport's runway! SOLUTION: Found a thread in the Saab forum where someone had found it was the JAR TugMaster plugin causing the problem for that aircraft, disabling it when using the Saab from X-Aviation removed the issue. I attempted the same fix with the IXEG 737Cl and hey presto -- problem resolved. I've not tested it yet, but I suspect if I turn the plugin back on again after resetting the plane, I would have the same cmd.exe pop-up problems. I do believe I saw a wee note in log.txt right at the end around TugMaster when having the problem - so will look to re-create, confirm, and lift the relevant part of the log out to paste into here should it be of use to the developers. Hopefully the above helps anyone else battling the same problem as me. Happy flying PX Quote
Litjan Posted April 24, 2016 Report Posted April 24, 2016 Hi PX, excellent finding, thank you very much! I invite everyone else with the same issue to try this and chime in on this thread, we need to get these showstoppers sorted out, rather yesterday than today! Jan Quote
vonmarty Posted May 24, 2016 Report Posted May 24, 2016 I just purchased Tugmaster a few months ago .. working ok with other aircraft. Is this a problem (IXEG + Tugmaster) that cannot be fixed? Quote
jimbim Posted May 24, 2016 Report Posted May 24, 2016 I was using this plugin as well without any problems with the CRJ2, B757 and B777. Only the combination with the IXEG is causing problems... And a really weird one :-) A CMD window... How the hell can that happen? :-) In general I do not care too much... The IXEG has it's own push back solution... On the other hand it would be nice to have it back again... it is simply more advanced and you can influence where you get pushed to... Jar does not really react on his forum... Someone started a topic there... Greetings, Sebastian Quote
mpedroni Posted May 27, 2016 Report Posted May 27, 2016 When press P for Pause open CMD and no way to come to fly. Nothing on log.txt and gizmoLog.txt Quote
Ben Russell Posted May 27, 2016 Report Posted May 27, 2016 14 minutes ago, mpedroni said: When press P for Pause open CMD and no way to come to fly. Nothing on log.txt and gizmoLog.txt Your log files tell us what other plugins you have installed. This lets us identify patterns. Although it looks empty to you please attach them anyway. Quote
Ben Russell Posted May 27, 2016 Report Posted May 27, 2016 3 hours ago, mpedroni said: Here the log Log.txt GizmoLog.txt Move this folder somewhere else to disable the iTow plugin; F:\X-Plane 10/Resources/plugins/iTow/ Quote
mpedroni Posted May 28, 2016 Report Posted May 28, 2016 the problem no longer occurs removing Itow. Shame because it is a handy plugin for pushback Quote
Litjan Posted June 13, 2016 Report Posted June 13, 2016 I am not sure, but I think there was an update to some of the JarDesign plugins that caused a clash with ours... Jan Quote
helios123 Posted August 25, 2016 Report Posted August 25, 2016 i seem to have this same problem, is there any solution"? Quote
Litjan Posted August 25, 2016 Report Posted August 25, 2016 23 minutes ago, helios123 said: i seem to have this same problem, is there any solution"? Yes. Jan Quote
helios123 Posted August 25, 2016 Report Posted August 25, 2016 34 minutes ago, Litjan said: Yes. Jan Sorry i should say, is there a way to leave tow plugin on and pause using IXEG? will this actual problem be fixeD? Quote
vonmarty Posted August 25, 2016 Report Posted August 25, 2016 1 hour ago, Litjan said: Yes. Jan Has this problem been confirmed to be a problem with itow plugin or the 737? Quote
Litjan Posted August 25, 2016 Report Posted August 25, 2016 (edited) 30 minutes ago, helios123 said: Sorry i should say, is there a way to leave tow plugin on and pause using IXEG? will this actual problem be fixeD? I think there is an updated version for the jar design tow plugin available, at least that is what I remembered. Maybe it was in another thread, have to search a bit for it... Jan Edited August 25, 2016 by Litjan Quote
Litjan Posted August 25, 2016 Report Posted August 25, 2016 Ok, I checked and I think the update was for the ground handling plugin, not the towmaster. So there seem to be no solution so far. Sorry, Jan Quote
helios123 Posted August 26, 2016 Report Posted August 26, 2016 (edited) 20 hours ago, Litjan said: Ok, I checked and I think the update was for the ground handling plugin, not the towmaster. So there seem to be no solution so far. Sorry, Jan i updated the towmaster from the org store to version 1.3 " TugMasterDeluxev1.3.zip " I pressed pause in the sim with it loaded and the problem didn't come up. Hopefully its been fixed, i will do a proper flight and pause a few times soon to test. if anyone else has had this problem please tell me if the latest tugmaster has fixed it. Edited August 26, 2016 by helios123 Quote
Litjan Posted August 27, 2016 Report Posted August 27, 2016 Thanks for reporting back on this, helios123! I hope that this update fixed it for you, let us know if you find out anything else, please! Thanks, Jan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.