Nano Posted August 11, 2014 Report Share Posted August 11, 2014 I've loaded and reloaded both versions of SMP with all other plugins removed. I also completely removed my custom scenery folder which I believe has a couple of airport specific plugins. Unfortunately, my XP 10.30b8 installation still only runs V1. V2 will run if there are no clouds, but as soon as the clouds start to show it slows to a complete standstill; fps rate of 0.225 I'm fairly certain it is not a ram issue as I have 8GB and iStat says only about half is being used. I do notice that when the frame drop way down, one of my 8 cores is locked up at 100%. I'm beginning to think this may have to do with the Gizmo64 plugin that V2 installs during installation. Is Gizmo only specific to V2? Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 11, 2014 Report Share Posted August 11, 2014 Well lets see a log.txt before we make anymore suggestions..... Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 11, 2014 Report Share Posted August 11, 2014 Skycolors set to emty, i had this in SM 1 before. Resources bitmaps sky colors Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 11, 2014 Report Share Posted August 11, 2014 I have no idea what your asking for Saynay.... And next time upload your log.txt please..... Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 11, 2014 Report Share Posted August 11, 2014 What is it, what i uploaded, think it's not my Fuel bill.My Question was in the first line, why the skyolors always are set to empty Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 11, 2014 Report Share Posted August 11, 2014 Skycolors could not be opened because it's empty.I had this Problem with SM 1.0 and reported this to Cameron, 1.2 the Problem was solved.Now it's again. Low Framerate, Skycolors loaded and anything as low as possible if You understand what i mean. Only "Flags" "Discreet FPS" is loaded,Frames 2Its a fresh copy of XP, no custom Scenerie loaded.Normaly XP runs between 18FPS or 120FPS.And John, i am not stupid, i know that the ram goes up and down, because of what plane is loaded,for instance SSGs 748 is a killer or KJFK from Aerosoft.Alpilots Scenerie never was drastic, real weather with Thunderstorms is a killer too.Man i work 25 Years with Computers, i'm the admin for the Computers in an Gymnasium and i tried anything up and down the row.Fakt is My iMac is not fast enough for Your SM 2.0 Plug.Maybe You make 1.3.3 Downloadable again, would be good enough for me.Last one was a good running XP with cool SkymaxxiBut this Plug is for a very high end sort of Computers.It makes no sense to have only clouds with a low framerate and no rays and no distance, i am not criticizing You it,s a real good tool.I deleted what i bought but cannot use this, anyway it's ok for me.Sometimes You win sometimes You loose. HochachtungsvollGerhard Schulz Quote Link to comment Share on other sites More sharing options...
Nano Posted August 11, 2014 Report Share Posted August 11, 2014 (edited) Interesting that I have the same computer and OS as Saynday and experiencing the same problem. My next step is the remove all aircraft and custom scenery, then install SMP V2 and see how that goes. Will report back. Nano Edited August 11, 2014 by Nano Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 11, 2014 Report Share Posted August 11, 2014 Skycolors could not be opened because it's empty.I had this Problem with SM 1.0 and reported this to Cameron, 1.2 the Problem was solved.Now it's again. Low Framerate, Skycolors loaded and anything as low as possible if You understand what i mean. Only "Flags" "Discreet FPS" is loaded,Frames 2Its a fresh copy of XP, no custom Scenerie loaded.Normaly XP runs between 18FPS or 120FPS.And John, i am not stupid, i know that the ram goes up and down, because of what plane is loaded,for instance SSGs 748 is a killer or KJFK from Aerosoft.Alpilots Scenerie never was drastic, real weather with Thunderstorms is a killer too.Man i work 25 Years with Computers, i'm the admin for the Computers in an Gymnasium and i tried anything up and down the row.Fakt is My iMac is not fast enough for Your SM 2.0 Plug.Maybe You make 1.3.3 Downloadable again, would be good enough for me.Last one was a good running XP with cool SkymaxxiBut this Plug is for a very high end sort of Computers.It makes no sense to have only clouds with a low framerate and no rays and no distance, i am not criticizing You it,s a real good tool.I deleted what i bought but cannot use this, anyway it's ok for me.Sometimes You win sometimes You loose. HochachtungsvollGerhard Schulz You have made a lot of inaccurate claims and have been very rude so sorry if you are going to have to wait until we can address Nano's problem. I didnt ask for your log file but was trying to address your issue also now yhis ridiculous reply.... Quote Link to comment Share on other sites More sharing options...
sundog Posted August 11, 2014 Report Share Posted August 11, 2014 (edited) Well one bit of interesting information in this case is that his graphics card only has 512MB of VRAM. That probably doesn't leave a lot of wiggle room for SMP2. However, it's a similar setup to my own iMac that I've been developing and testing the Mac version of SMP2 on, and it runs fine on it. However again, my iMac is running X-Plane 10.25 (not the beta 10.30) and Mavericks, which is different from this configuration. My iMac also has no other plugins or custom scenery, other than Maxx-FX of course Nano - it's not clear to me if you already tried my earlier suggestion of configuring SkyMaxx Pro 2.0 to have a similar memory footprint to SkyMaxx Pro 1.3. If you disable the cloud shadows, lens flare, and hi-res cloud puffs options in SkyMaxx Pro 2.0 - then exit and restart X-Plane - does it run better? Edited August 11, 2014 by sundog Quote Link to comment Share on other sites More sharing options...
Nano Posted August 11, 2014 Report Share Posted August 11, 2014 Interesting that I have the same computer and OS as Saynday and experiencing the same problem. My next step is the remove all aircraft and custom scenery, then install SMP V2 and see how that goes. Will report back. Nano Well I did that and got the same results. At times I would get 40+ fps and then it would drop down to .025 and drag on. I was using the Falcon 7X which does use the SASL plugin. I guess that would be the next logical step to see if that is the issue. Quote Link to comment Share on other sites More sharing options...
Nano Posted August 12, 2014 Report Share Posted August 12, 2014 (edited) Update. Don't exactly know what I did except move all my custom scenery and aircraft back into the XPlane folder and now getting good frame rate with SMP V2. Currently flying Carenado BE58 to Nice and getting 26 fps with broken clouds below. Now that I have it working, I can see that V2 is much more visually appealing to V1. Thanks for the great work John. Nano Good luck to Saynday. Hope you get it running well. Edited August 12, 2014 by Nano 2 Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 12, 2014 Report Share Posted August 12, 2014 Thank you for the update Nano..... Something odd is going on with a few users, most systems will probably have a slight increase over v1..... Sorry if I come off acute but we are trying to help figure out whats going on.... Quote Link to comment Share on other sites More sharing options...
Nano Posted August 12, 2014 Report Share Posted August 12, 2014 I believe I've found the guilty party: XSquawkbox. Remove this plugin from your plugin folder and see if it fixes the issue. It did for me. Nano Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 12, 2014 Report Share Posted August 12, 2014 What for is the Squawk box? Anyway Thank You Nano! GreetingsG. Quote Link to comment Share on other sites More sharing options...
Nano Posted August 12, 2014 Report Share Posted August 12, 2014 XSquawkBox is a plugin used to log in to the VATSIM network. http://www.xsquawkbox.net/xsb/about/ Hope I'm not violating any rules here. Quote Link to comment Share on other sites More sharing options...
SkyCaptainA320 Posted August 13, 2014 Report Share Posted August 13, 2014 (edited) So there's a problem with SMP 2.0 and xsquawkbox? smhWas xsquawkbox tested with SMP 2.0 during is beta phase?Does anyone seem to have issues with FF 757 professional autoflight and SMP 2.0? Edited August 13, 2014 by SkyCaptainA320 Quote Link to comment Share on other sites More sharing options...
sundog Posted August 13, 2014 Report Share Posted August 13, 2014 There was a bug in an older version of XSquawkBox that could be triggered by any other plugin. Do a Google search for "XSquawkBox crash" and you'll see what I mean. You need to make sure you're running the latest version of XSB - it's not a Skymaxx Pro issue. Several of our beta testers flew regularly with the FF 757. Quote Link to comment Share on other sites More sharing options...
SkyCaptainA320 Posted August 13, 2014 Report Share Posted August 13, 2014 (edited) Great! that sounds good. I have done a few flights with the 757 and Skymaxx Pro 2.0. The only issue so far I have with xsquawkbox right now is the crash to desktop on start up of x-plane, not a fault of skymaxx pro. I think its a problem with xsquawkbox itself. I don't know if you are familiar with this issue Sundog, but every time I want to use X-plane, I have to start ''X-plane 10 32 bit'' first then I start the ''64 bit version'' and It doesn't crash on start up. I do see some other issue with Skymaxx Pro 2.0 with the general change/weather update but think i will start a new topic regarding that. Edited August 13, 2014 by SkyCaptainA320 Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 18, 2014 Report Share Posted August 18, 2014 Hi Quote Link to comment Share on other sites More sharing options...
Saynday Posted August 18, 2014 Report Share Posted August 18, 2014 I am tired! Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 18, 2014 Report Share Posted August 18, 2014 Im confused what caused that error? A complete rundown would be nice.... The sky color sets are complete in smp this looks as if you modified or tried adding your own.... Quote Link to comment Share on other sites More sharing options...
SkyCaptainA320 Posted August 19, 2014 Report Share Posted August 19, 2014 Hey devs, any chance the clouds will be much darker at nights in the next update? Quote Link to comment Share on other sites More sharing options...
Cameron Posted August 19, 2014 Report Share Posted August 19, 2014 Hey devs, any chance the clouds will be much darker at nights in the next update? No. We're quite happy with how they've turned out now. Sorry if this is disappointing to you, but we have already received MANY comments on how much people like the new way of clouds transition during evening and the colors they are. Quote Link to comment Share on other sites More sharing options...
JohnMAXX Posted August 19, 2014 Report Share Posted August 19, 2014 Another thing to keep in mind the clouds will be brighter at certain locations on earth depending on the angle of the sun and time of year. Quote Link to comment Share on other sites More sharing options...
AnonymousUser68 Posted August 19, 2014 Report Share Posted August 19, 2014 No. We're quite happy with how they've turned out now. Sorry if this is disappointing to you, but we have already received MANY comments on how much people like the new way of clouds transition during evening and the colors they are. I am personally very happy with the cloud visibility at night. Big improvement over v1. I don't want to be taking a performance hit for clouds at night if I can't even see them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.