Jim Kallinen Posted July 19, 2016 Report Posted July 19, 2016 9 hours ago, Colin S said: What is your Gamma setting, Jim? I just realized that it's not supposed to be that bright green. Since I'm doing an overhaul on the existing sceneries, I can address that. Turned it up ages ago for some of my G2XPL scenery to look better. Have no idea at this time. Been a few weeks since opening up X-Plane. Work schedule has me running right now. Will check when time allows and report back. 1 Quote
Jim Kallinen Posted July 19, 2016 Report Posted July 19, 2016 Here ya go, looks like Gamma is set at 3. 1 Quote
Colin S Posted July 20, 2016 Report Posted July 20, 2016 I suppose one should say that I took the old SkyMaxx out for a drive. Stick in some default clouds and wham I've never seen anything like this before. In any sim or game. 2 Quote
Colin S Posted July 20, 2016 Report Posted July 20, 2016 5 hours ago, Jim Kallinen said: Here ya go, looks like Gamma is set at 3. Try it at somewhere between 1.8 and 2.2, as that's closer to default and it's also what I designed it for. Gives a bit richer and crisper imagery. Quote
Dionsol Posted July 28, 2016 Report Posted July 28, 2016 (edited) Hello everyone, just thought I would share a few photos of the E175 that I've recently purchased. Going through the learning process in how to use the FMC for the E175. Some of you may ask why did you choose the E175 when the new E170 has just came out, it's the new shiny. Regrettably the E170 in my opinion is slightly overpriced. I'm sure it's a fine aircraft would even after the $10.00 discount that I have, the aircraft was still cost $39.00 out the door. As some of you may know, with the track record of aircraft developers, a lot of them do not evolve their aircraft over time and add features and enhancements. Some do and some don't. I can give you tons of examples of this behavior but it is what it is. So for me $34.95 is about the extreme that I will pay. But that's just me and my opinion. The E175 appears to be shaping up a fine aircraft and looking forward to the latest update version 1.2 once version 1.50 of X-Plane has dropped. The developer said they have enhancements to the aircraft and are just waiting for fuel calculation engine component of X-Plane to be finished. I have noticed no flights I've done, that the aircraft does not burn fuel as much as it should. That is a good thing but it does need to mimic the real thing if possible. So enjoy the pictures more will be on the way over time. As a selfless plug, if if you have a desire to fly your flights withe an economy program for X-Plane, me and Mr. Mcbride are currently doing flights to generate income for my VA Allied Air Carrier on XPflier.net economy module network. We're very small time right now and only have one aircraft available to fly which is the PC 12. But if you like the aircraft enjoy flying the aircraft, you are always welcome to check it out. Make no mistake the network is rough around the edges but that's OK at least it gives you a purpose of your flights. Also to piggyback a thought, we signed up for sim buddy the free version to add another layer component to our flight simulation experience by auto log book entries and going up the ranks of your pilots career. Thanks again for reading and enjoy the pictures Dion Markgraf AKA: Dionsol Flight Simulation (X-Plane 10 pilot) & Aviation Enthusiast Voice Com's channel: https://discord.gg/aH7x774 Youtuber: https://youtube.com/user/dionm01 Edited July 29, 2016 by Dionsol 5 Quote
Mr_McBride Posted July 30, 2016 Report Posted July 30, 2016 Just took off from Portland headed to Dallas. Mt Hood. 3 Quote
Dionsol Posted August 11, 2016 Report Posted August 11, 2016 Sorry just had to post more cloud pictures. SkyMaxx Pro and RWC are just awesome. Fly over KPHX again heading to KGEG Dion 4 Quote
ltbatower Posted August 11, 2016 Report Posted August 11, 2016 6 hours ago, Dionsol said: lookiin' very sweet cheers Dion thanks 1 Quote
Dionsol Posted August 13, 2016 Report Posted August 13, 2016 Good morning, leaving Spokane KGEG to Juneau Alaska PAJN Carrying 78 Passengers and there gear. Expected bumpy flight in spots but over all a good flight. Our Cuz Alt. today is expected at FL320 for most of the flight. Enjoy your flight and thank you for choosing ALLied Air Carrier 3 Quote
Dionsol Posted August 16, 2016 Report Posted August 16, 2016 In my Fave flying over Reno/Sparks Nevana area Dion MarkgrafAKA: DionsolFlight Simulation (X-Plane 10 pilot) & Aviation EnthusiastVoice Com's channel: https://discord.gg/aH7x774Youtuber: https://youtube.com/user/dionm01 4 Quote
Dionsol Posted August 17, 2016 Report Posted August 17, 2016 Now here's something in X-Plane that I've never seen before. Was was checking out airports to add to my VA destinations, I found this "BUSTED!!!!!!! " 4 Quote
Defiance_co Posted August 19, 2016 Report Posted August 19, 2016 Hiya's, Few nights ago i got to fly, storm came in fast, was the best i've seen so far lol Managed to get a few shots at the right time, and i chucked in a 747 snap for good measure lol Have Fun Tony 1 Quote
Mr_McBride Posted August 20, 2016 Report Posted August 20, 2016 Departing Atlanta heading to the Bahamas. 2 Quote
Mr_McBride Posted August 20, 2016 Report Posted August 20, 2016 Pilatus PC-12 departing Nassau. 5 Quote
niebieski Posted August 25, 2016 Report Posted August 25, 2016 Refreshing my helicopter flying skills and exploring the new Bucharest airport scenery by DAI-Media at the same time! 5 Quote
Dionsol Posted August 26, 2016 Report Posted August 26, 2016 (edited) That is one thing that is not for me, Helis. I've flown those things and crashed them so much and said no thanks and walked away. But I will say nice pictures. Dion Edited August 26, 2016 by Dionsol Quote
Dionsol Posted August 26, 2016 Report Posted August 26, 2016 (edited) Just a little Float plane action enjoy Juneau, Alaska Edited August 26, 2016 by Dionsol 5 Quote
Defiance_co Posted August 26, 2016 Report Posted August 26, 2016 Lookin good there Dion (burned my reps so hangtight) Getting to grips with this old gal Around the area of 'that old gal' Tony 5 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.