Erny_Module Posted August 5, 2023 Report Posted August 5, 2023 ...one small thing... does anyone know where the power switch for Avitab is? (Right in front of you will probably be the answer!) Quote
meierzwo Posted August 5, 2023 Report Posted August 5, 2023 6 hours ago, Erny_Module said: ...one small thing... does anyone know where the power switch for Avitab is? (Right in front of you will probably be the answer!) There is a small Switch on the upper right side of the Frame. I did a quick and dirty Video. 1 Quote
Erny_Module Posted August 5, 2023 Report Posted August 5, 2023 3 hours ago, meierzwo said: There is a small Switch on the upper right side of the Frame. I did a quick and dirty Video. Wow - thank you! Above and beyond the call and all that! Quote
Cyber Copter Posted August 15, 2023 Report Posted August 15, 2023 On 5/18/2023 at 7:41 PM, AZSimPilot said: I uploaded the new V2.1 update and first thing I notice was no more Comm/Nav Audio functions anymore (on the instrument). Were all the push buttons/functions/lights discontinued? All I see is High/Low Sens and the test button work... when test is pushed only the High/Low Sens light indicate. I've been having some issues too. I also cannot see any illuminated indicators for the audio monitoring channels. I can monitor Com radios, but don't hear any morse identifiers on the Nav monitor channels. I haven't verified if I can transmit. The RXP GPS was pretty grumpy to get initialized for the first time but has settled down after I forced the use of the default Laminar GPS, and then tried the RXP again. This is probably is probably not a high priority issue, but I observed that when I use my Plane Command voice triggered copilot software some of the commands associated with the avionics were ineffective. I installed the aircraft from a fresh download today. The MU is a brilliant flier, I like her a lot! Quote
Josh M Posted August 15, 2023 Report Posted August 15, 2023 The lights are broken on my end in 2.1 in XP12 as well. BUT it's still working for me with xPilot for VATSIM. Just have to use the client to now the status of the tx/rx of the audio panel. Quote
meierzwo Posted August 23, 2023 Report Posted August 23, 2023 XPlane 12.06b6 The MU-2 or the old Gizmo Plugin is flooding the Log with this Error: E/GFX/Bridge: Encountered OpenGL error GL_INVALID_OPERATION Only the MU-2 does this, no Errors with Stock Laminar or other Third Party Planes. Here is a answer from the Laminar Forum: https://forums.x-plane.org/index.php?/forums/topic/292842-1206b6-is-available/&do=findComment&comment=2596327 Looks like there is some work to do. Log.txt Quote
tkyler Posted August 23, 2023 Report Posted August 23, 2023 (edited) 4 hours ago, meierzwo said: Only the MU-2 does this, no Errors with Stock Laminar or other Third Party Planes. Do you have the G500 plugin in the MU2 plugins folder? Have you tried moving that out of the folder temporarily for debugging? What does the log.txt look like if that's the case etc? -tk Edited August 23, 2023 by tkyler Quote
meierzwo Posted August 24, 2023 Report Posted August 24, 2023 (edited) 12 hours ago, tkyler said: Do you have the G500 plugin in the MU2 plugins folder? Have you tried moving that out of the folder temporarily for debugging? What does the log.txt look like if that's the case etc? -tk I removed the Plugin but there is no difference. I also tried the Stock Laminar 172 with the G500 Plugin for a crosscheck if the Plugin causes that Error. But no Error with the 172 and the Plugin. It's only the MU2, with or without the G500 Plugin. The Plane is still functional. Log.txt Edited August 24, 2023 by meierzwo Quote
tkyler Posted August 24, 2023 Report Posted August 24, 2023 I'll ping Laminar on this, I think that error is coming from them and is Windows related, I'm not seeing this from the few Mac users I've ping'd. Flooding the log with a message like that, presumably from some flight loop is bad practice. Thx for reporting. -tk Quote
Ben Russell Posted August 25, 2023 Report Posted August 25, 2023 12 hours ago, tkyler said: I'll ping Laminar on this, I think that error is coming from them and is Windows related, I'm not seeing this from the few Mac users I've ping'd. Flooding the log with a message like that, presumably from some flight loop is bad practice. Thx for reporting. -tk Sid @ Laminar has added additional diagnostics code and the "error being raised" is by design. Different behaviour between Windows and Mac graphics driver stacks is normal and further compounded by Vulkan(+Zink) for Windows / Metal for Mac. User with a problem is running Windows. Quote
alexcunille Posted October 19, 2023 Report Posted October 19, 2023 Hi, I purchased the Mitsubishi MU-2 Marquise on November 2018, I have read there is an update for the airplane, I already downloaded the plane again but it still version 1.9, do I have to purchase a newer version or are there 2 different versions? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.