T / O: "Config" alarm despite everything

[Prosco]

Hello,

Hello, I am following the checklist and I am thinking of doing the entire T / O procedure and despite everything when I start taxiing I have the "Config" alarm which sounds but I do not know why.

I recorded this phase by video ((watch in 1080), it lasts 1 minutes : https://drive.google.com/file/d/1vrrVf54BuAyCFPJY_AOEzi2dw_saxwgM/view?usp=sharing

If anyone could help me that would be really nice. Thanks in advance.

Edited March 30, 2021 by Prosco

[mgchrist5]

Just a quick guess on my part, but it looks like you have flaps 7 selected.  I believe flaps 7 takeoffs are not approved for Saabs....they can either be flaps 0 or 15.  That might be triggering your CONFIG alarm.

 

EDIT:  Sorry, please disregard.  I tried a quick test on my end and flaps 7 did not trigger the config alarm.  Must be something else that I'm missing.  Hopefully someone else will be able to assist you.

Edited March 30, 2021 by mgchrist5

[JGregory]

Your condition levers are less than 83˚.  Set them to MAX.

[SupraJari]

Also make sure your trim is set correctly. I've had this when doing touch and go's when trim has been out of green area.

Edited March 31, 2021 by SupraJari

[Prosco]

@JGregory - Thank you, I will test.

@SupraJari -  Thank you but Watch the video at 00:57 - trim is set correctly.

[mjrhealth]

25 minutes ago, Prosco said:

@JGregory - Thank you, I will test.

@SupraJari -  Thank you but Watch the video at 00:57 - trim is set correctly.

For one thing you still have the ground OP button selected but the TO inhibit button above just silences unneccesary alarms, still looking

[JGregory]

Guys... you can see in the video that the Condition Levers are set @ 82˚... that WILL set off the alarm.

[Prosco]

1 hour ago, JGregory said:

the Condition Levers are set @ 82˚... that WILL set off the alarm.

That was it. A big thank-you  @JGregory . And thank you to others for your help.