Key Assignments for SR22T

[Swarren529]

Does anyone know what the keyboard assignments are for - oxygen on, oxygen off and fuel boost prime?  Thanks in advance for any help you could provide!

[Coop]

Oxygen switches:

afm/sr/cmd/switches/o2_On
afm/sr/cmd/switches/o2_Off

Fuel Boost/Prime switch:

afm/sr/cmd/switches/fpumpUp
afm/sr/cmd/switches/fpumpDn

Note, the fuel pump switch will just reposition the switch up and down, going from Prime -> Off -> On and vice versa.

[Swarren529]

Thank you very much.  This plane is fantastic!

[memcbride]

A follow-up request.

I'm setting up a Stream Deck to handle some actions.  For example I found the toggle for the CAPS cover, pin, etc. and the toggle for the headset.

What I'm not finding is the keyboard assignment for moving the ignition key into/out of the ignition switch.  Any help would be appreciated.

As an aside, I just moved to three 43" tv/monitors and it has jumped my enjoyment of flying this plane to another level.

[Coop]

13 hours ago, memcbride said:

I'm setting up a Stream Deck to handle some actions.  For example I found the toggle for the CAPS cover, pin, etc. and the toggle for the headset.

What I'm not finding is the keyboard assignment for moving the ignition key into/out of the ignition switch.  Any help would be appreciated.

Putting key in ignition switch:

afm/sr/cmd/panel/keyPositionIn

And removing key:

afm/sr/cmd/panel/keyPositionOut

 

[memcbride]

Thanks Coop!!

[AntonovimGarten]

Hi, i am very new here. How can i add a "toggle" Button command for such switches?

Oxygen switches:

afm/sr/cmd/switches/o2_On
afm/sr/cmd/switches/o2_Off

Fuel Boost/Prime switch:

afm/sr/cmd/switches/fpumpUp
afm/sr/cmd/switches/fpumpDn

Note, the fuel pump switch will just reposition the switch up and down, going from Prime -> Off -> On and vice versa.

[Coop]

11 hours ago, AntonovimGarten said:

Hi, i am very new here. How can i add a "toggle" Button command for such switches?

For the oxygen switch, afm/sr/cmd/switches/o2_Toggle can be used.

The fuel pump is a three-position switch, so there is no simple toggling for that available.

[AntonovimGarten]

OK, nice. But whats about something like that?

SW_PITOT.SW.ON=afm/sr/switches/pitotHeat|1
SW_PITOT.SW.OFF=afm/sr/switches/pitotHeat|0

SW_AVIONICS.SW.ON=afm/sr/switches/avionics|1
SW_AVIONICS.SW.OFF=afm/sr/switches/avionics|0

…

Can i add a "toggle" Button command for this?

 

[Coop]

14 hours ago, AntonovimGarten said:

OK, nice. But whats about something like that?

SW_PITOT.SW.ON=afm/sr/switches/pitotHeat|1
SW_PITOT.SW.OFF=afm/sr/switches/pitotHeat|0

SW_AVIONICS.SW.ON=afm/sr/switches/avionics|1
SW_AVIONICS.SW.OFF=afm/sr/switches/avionics|0

…

Can i add a "toggle" Button command for this?

 

Yes, all two way switches have toggle commands. If you scroll through the X-Plane command dialog with the SR22 loaded, you can see all of the commands there.

[Kiwiflyer71]

Is there one for Parking Brake? Can’t find it in list

[Coop]

The standard X-Plane command is used for that. “Toggle Brakes Max Effort”

[RobW05]

Hi, new user of your fantastic SR22 here.

On 6/11/2021 at 8:33 AM, Coop said:

The standard X-Plane command is used for that. “Toggle Brakes Max Effort”

I was wondering if you could provide a custom command for the parking brake.

I know the default "Toggle brakes max effort" works, but isn't that technically wrong? The parking brake handle in the SR22 just 'conserves' the brake pressure you are putting in with the toe brakes, so you always have to step on the toe brakes before you pull the brake handle. Otherwise you'll be up for a nasty surprise at startup.

Now, when using the xplane "toggle brakes max effort" command it will provide brake pressure magically without stepping on the toe brakes first. Isn't that cheating?

EDIT: I just found out there's a dataref I can manipulate to produce the result i was looking for - > afm/sr/f/misc/parking_brake

That works for me, all is fine.

 

 

 

Edited September 19, 2021 by RobW05
Added information

[Corey Scott]

Hi where is full command list for sr22 g1000 i need dataref for building a sim around this add on but can’t find a manual or listing available to program with arudino or simvim hcsci 

[Corey Scott]

Example of panel mentioned above need help with commands i have also bought an actual sr22 yoke i need commands for trim to/ga flaps etc

[Coop]

Hi Corey,

All of the datarefs are exposed to DataRef Editor, they can be found by searching afm/sr/

All of our commands are exposed to the X-Plane command binding interface, under afm/sr/cmd

[sace]

I don't see the "cmd" subfolder after "afm/sr/... when I use the dataref editor with the Cirrus SR22 G1000 (1.2.2). Was that folder eliminated?

Specifically I'm looking for the starter switch. I can set sim/cockpit/engine/ignition_on = 4 to engage the starter, but the start sequence is not right: the switch indicates in the start position, and the prop even turns, but the starter time does not increase and there is no starter sound. I must need to set another dataref somewhere...

Thanks in advance!

[sace]

Nevermind! I found it: afm/sr/misc/rsg_ignition 

Cool cow, though!