SHaines Posted April 24, 2020 Report Posted April 24, 2020 I have successfully mapped my CH Eclipse yoke to operate the throttle through Flight Idle, advance, retard and Rev/Taxi modes. Works great. What I would like to be able to do is switch the lever over from Flight Idle to High Idle (or back) then by using an unused yoke lever, move it down to Low Idle and Fuel Cutoff and back up to High Idle. Does anyone know if and how this might be done? Quote
okidokki Posted April 25, 2020 Report Posted April 25, 2020 You might want to take a look at Cheers Quote
jfjoubert Posted April 25, 2020 Report Posted April 25, 2020 8 hours ago, SHaines said: Does anyone know if and how this might be done? Yes... you can use a FlyWithLua script. Take a look at this post and the Mixture.lua script from @Ch.Cole. Quote
SHaines Posted April 25, 2020 Author Report Posted April 25, 2020 To all of the good folks who replied to my post and to others asking this same basic question... thank you. Here's what I discovered... I have my CH Eclipse yoke/blue lever mapped to the throttle. It works very well. I also have a button mapped to activate REV. When I do that and move the throttle it moves into Taxi Range and ultimately Rev Mode. All good. I have read a dozen posts trying to explain how to map a switch to move the throttle from Flight Idle to High Idle and back. Nothing seemed to work for me including the LUA script graciously offered by @/Ch.Cole. I read further and one post seemed to say that assigning MIXTURE RICH A BIT to a yoke switch would cause the lever to move left if you move the switch up and right if you move the switch down. Well, not only does it do that, if you switch down (right) and then switch down again it moves the lever to low idle, do it again and it moves it to Cutoff. WOW! The holy grail of throttle automation! So thanks to all for steering me in the right direction so i could "discover" what you were all trying to tell me Quote
HCarter Posted June 10, 2020 Report Posted June 10, 2020 Does anyone know where I can get a copy of FlyWithLua? The X-Plained website is closed for new registrations due to COVID-19, so it's currently unavailable for download if you weren't previously a member. I've never had a need for it until now with the TPM900. Thanks Quote
Marius_B Posted June 10, 2020 Report Posted June 10, 2020 Hi, https://forums.x-plane.org/index.php?/files/file/38445-flywithlua-ng-next-generation-edition-for-x-plane-11-win-lin-mac/ 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.