SirJohn62 Posted October 26, 2018 Report Share Posted October 26, 2018 Hello everybody, is there anyone among you who has used the VNAV before? I have tried it several times, but descent does not start, although everything is displayed correctly. I took some screenshots. What am I doing wrong? Did I forget to press any key? I love this plane, it's absolutely fantastic. Greetings SirJohn62 Quote Link to comment Share on other sites More sharing options...
DNick89 Posted October 26, 2018 Report Share Posted October 26, 2018 I'm curious too. I'm new to the g1000, and just have assumed I'm doing something wrong. Quote Link to comment Share on other sites More sharing options...
danhenri Posted October 26, 2018 Report Share Posted October 26, 2018 Hello, perhaps this could help you (Garmin manual) : Prior to descent path interception, the Selected Altitude must be set below the current aircraft altitude by at least 75 feet. For the flight director to transition from Altitude Hold to Vertical Path Tracking Mode, acknowledgment is required within five minutes of descent path interception by: • Pressing the VNV Key • Adjusting the Selected Altitude If you have set your new altitude more than 5 minutes before the TOD, nothing occurs. You have to turn the ALT button a bit to initiate your descent. 2 Quote Link to comment Share on other sites More sharing options...
SirJohn62 Posted October 26, 2018 Author Report Share Posted October 26, 2018 Hello danhenri, I think that was my mistake. I have everything set in time and more than 5 minutes before descent. I'll try it later. Do you have a link for that manual? Thanks for the info. Quote Link to comment Share on other sites More sharing options...
danhenri Posted October 26, 2018 Report Share Posted October 26, 2018 You'll find the link at the end of the Quick Start manual. Quote Link to comment Share on other sites More sharing options...
NeoPyro Posted October 26, 2018 Report Share Posted October 26, 2018 This tutorial may prove useful to you. 2 Quote Link to comment Share on other sites More sharing options...
SirJohn62 Posted October 27, 2018 Author Report Share Posted October 27, 2018 Hi Guys, thanks for your tips and help. I have not quite solved my problem yet. I'm still testing and will report again. Many thanks. Greetings SirJohn62 Quote Link to comment Share on other sites More sharing options...
oldflyguy Posted October 27, 2018 Report Share Posted October 27, 2018 Hi SirJohn62, I've also had issues with VNAV. However, after watching the supplied youtube tutorial and some others I've found the VNAV works perfectly. Almost identical to the real thing - close enough for government work for sure...LOL! It is a bit more of a hassle to work in the sim than in real life (as is the simple 430 - I have extensive RW experience with this one) but you just have to configure "shortcuts" and views that work for you. The TBM900 is a hands on thing to fly - and here I thought turboprop aircraft engine management was just a set it and forget it thing...NOT!!! Quote Link to comment Share on other sites More sharing options...
pcartier1960 Posted October 28, 2018 Report Share Posted October 28, 2018 This video solved my lack of VNAV knowledge. Quote Link to comment Share on other sites More sharing options...
cmbaviator Posted October 28, 2018 Report Share Posted October 28, 2018 in orddr to have vnav, you have to enter aircraft weight before getting airbone right, how to enter those weights ? Quote Link to comment Share on other sites More sharing options...
danhenri Posted October 28, 2018 Report Share Posted October 28, 2018 The Weight is entered in "payload": but What does it have to do With VNAV ? 1 Quote Link to comment Share on other sites More sharing options...
SirJohn62 Posted October 29, 2018 Author Report Share Posted October 29, 2018 hi guys, after some reading and some videos I have the VNAV on the route get to run. But you have to stay within 5 minutes before the ToD to automatically descend. If the time is longer, turning the Altitude select button or pressing the VNav button again does not help to initiate descent in my case. Unfortunately, I have no experience with a real G1000 and I can not say whether it is up to me or if it is a bug in the simulation. However, in all cases, it does not match the documentation. I also tried to use VNAV after activating the approach. This results are completely incomprehensible results for me. I have to test that even further. Greeting SirJohn62 Quote Link to comment Share on other sites More sharing options...
danhenri Posted October 29, 2018 Report Share Posted October 29, 2018 On approach, you have to press the APP button, not VNV. You have to be strictly at the altitude required at the IAF. In APP mode too, no need to set a new altitude (you may then set the MA altitude). There is one useful feature that is missing in the Laminar Garmin 1000 : in the real thing, if Vnav mode must be activated once again, the annunciation VPATH flashes in white on the PFD as a reminder. Quote Link to comment Share on other sites More sharing options...
SirJohn62 Posted October 29, 2018 Author Report Share Posted October 29, 2018 Thx. Yes, I also read it in the documentation and did not find it in the Sim. It was not displayed in the G1000. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.