VasilisMaximos Posted April 29, 2018 Report Posted April 29, 2018 (edited) After PC format that i have made, i have install everything. including Windows 8.1 C++ librarys, x-plane 11, and of course IXEG. Every button and axes from my setup working except the throttle axes. I have calibrate my joystick with x-plane 11 and the actual throttle axes work with all my other aircraft ecxept zibo. I have trying to uninstall and reinstall the Aircraft with the same issue. In the log.txt there is an error that says W/ACF_CONFIG: ACF Config data file for Aircraft/X-Aviation/IXEG 737 Classic/B733_config.txt is not valid! i don't know if that the problem... i have also trying to re assign the throttle axes to other axes in other joystick but nothing happens. Again every other axes and button works except the throttles. I have also trying to move the throttles with F2 - F1 buttons .... nothing!! PLEASE help me!!!... . Log.txt Edited April 29, 2018 by Morten Quote
VasilisMaximos Posted April 29, 2018 Author Report Posted April 29, 2018 SOLVED!! i Have update my x-aviation licence via Gizmo and everything looks good now... 1 Quote
VasilisMaximos Posted May 2, 2018 Author Report Posted May 2, 2018 @Litjan ... I rushed to say that the problem was solved. Unfortunately after the Gizmo update (or reset) the throttle works for a couple of seconds and then stops. I have the latest x-plane 11.20r3 version. Quote
Litjan Posted May 2, 2018 Report Posted May 2, 2018 I looked at your log.txt and you are running more (possibly conflicting) plugins than I could count in an afternoon . I would ask you to remove them (temporarily) to find out which one is the culprit. My money would be on flywithlua or FSUIPC, possibly also the python interface. There is a boatload of warnings about "unassigend joystick axis" in your log as well, so I am not surprised that something isn´t working right... Cheers, Jan Quote
VasilisMaximos Posted May 2, 2018 Author Report Posted May 2, 2018 Just now, Litjan said: I looked at your log.txt and you are running more (possibly conflicting) plugins than I could count in an afternoon . I would ask you to remove them (temporarily) to find out which one is the culprit. My money would be on flywithlua or FSUIPC, possibly also the python interface. There is a boatload of warnings about "unassigend joystick axis" in your log as well, so I am not surprised that something isn´t working right... Cheers, Jan I have already thought of it and i have tried to remove all the Plugins but nothing happened. I have spoken and with some guys in Facebook who have the same problem ...we do not find a solution. Quote
VasilisMaximos Posted May 2, 2018 Author Report Posted May 2, 2018 (edited) On the other hand (just before the pc format) with same plugin in same machine + OS and with x-palne 11.11 version i had no problem. Also i need xpuic plugin in order to communicate with my VRinsight panel that i have. In FlywithLua i have only 3 basic scripts mainly for for visual reasons...... All other plugins is from scenery developers such Autogate and ground traffic. I Have also The Saab 340A that uses also Gizmo and works perfect! the only aircraft that have this problem is the IXEG. :-( Edited May 2, 2018 by VasilisMaximos Quote
djvagelis80 Posted May 2, 2018 Report Posted May 2, 2018 Problem solved! I had the latest xpuipc ... i replaced it with xpuipc v2.0.0 and everythinh is ok...you can try it and let me know... Quote
VasilisMaximos Posted May 2, 2018 Author Report Posted May 2, 2018 (edited) YEAP! thanks! the problem was the XPUIPC v.2.0.5.9 that I have download from this site. .https://german-xflight.de/forum/index.php?resources/xpuipc.4/history . I have reinstall the version 2.0.0 from this site .http://www.tosi-online.de/XPUIPC/XPUIPC.html . And the problem sorved for good this time. Thanks to @djvagelis80 Edited May 2, 2018 by VasilisMaximos 1 Quote
marpilot Posted November 5, 2018 Report Posted November 5, 2018 Thanks for the solution - I just updated to XPUIPC v.2.0.5.9 and the problem occured. Before I go back to previous (2.0.3.5) may I ask if you can make it compatible? Quote
marpilot Posted November 6, 2018 Report Posted November 6, 2018 Jan? Hello, would you consider including compatibility with XPUIPC2.0.5.9 in the next B733 update? It is for pilots flying in virtual airlines Cheers Quote
Litjan Posted November 7, 2018 Report Posted November 7, 2018 I am not even sure what the problem is or how we could fix it from our side. I think it would be up to XPUIPC to ensure compatibility. Cheers, Jan Quote
marpilot Posted November 7, 2018 Report Posted November 7, 2018 Hi, strange thing is only your plane has problem with throttle - can't move it even with mouse - when new XPUIPC in use. Bye Quote
mmerelles Posted November 7, 2018 Report Posted November 7, 2018 Hi @marpilot i am using XPUIPC for my motorized TQ, have no problem with the IXEG. Have you tried using latest XPUIPC version 2.0.5.16 just in case? Or do you require specifically 2.0.5.9? Quote
marpilot Posted November 7, 2018 Report Posted November 7, 2018 (edited) I didn't know there is a newer XPUIPC!? Do you have a link to the latest? Thanks PS.Just got it. Will try and report Edited November 7, 2018 by marpilot Quote
marpilot Posted November 7, 2018 Report Posted November 7, 2018 NOT SOLVED The problem persists also with this ver.XPUIPC 2.0.5.16. If I disable it then everything is OK (throttle). Hmmm.... Quote
marpilot Posted November 7, 2018 Report Posted November 7, 2018 Will reinstalling B733 help? Maybe should try. Quote
rossaire Posted November 22, 2019 Report Posted November 22, 2019 Hello Gentlemen, It appears that the only time that I experience this problem; that being, a. control movement, b. visual (and audible) depiction of throttle movement with misconfig warning buzzer, c. no physical spool/throttle-up response from engines...;is when I rename the "b738_4k.acf" file to "b738.acf". Go figure. Respectfully Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.