ilias.tselios

There 2 knobs that controlled via 2 custom datarefs, for left and right wipers respectively. les/dc3/iceRain/mnp/wiper_switch_L les/dc3/iceRain/mnp/wiper_switch_R Also the landings lights are controlled via those datarefs: les/dc3/elecSys/lighting/L_ldgLit les/dc3/elecSys/lighting/R_ldgLit May be, some time in the future, change the controls to be custom commands, but because many systems has been customized, might not be possible to use default commands.

The OpenGPWS plugin is needed to run the G500 plugin. Won't function without this.

Yes that the old version.

I don't for what reason, but in your Log.txt file, does not show to load the G5 plugin. Please check that the plugin exists in the Sundowner's/plugins folder. Must be a G5 folder. If exists, inside there is a version.txt file. What version of the G5 plugin says?

I'll check what going on. Not hard to miss things with 4 sets of manipulators!

Click the inner knob to go to nav freq mode, and turn on the volume. Then the NAV radio is powered. If that does not working, try to plug in the headset. Might not be quite the right way, but because we support 3 different units, plus the audio simulation with the headset, it is a small trade off, to have everything working. Btw, I've asked the author to add a couple datarefs, so I can know the state of various functions on the unit, but he was not willing to help. For example, when you go into nav freq mode, the volume knob controls the nav 1 volume, but after a few seconds returns to com mode. I have to track your clicks and run timers every time you click this knob to figure out what the volume knob is doing.

Noted to be fixed. Might be a peculiarity of the Autopilot. You have to be below the glideslope and in ALT mode. Then press the APPR button and you should get both ALT and GS indications. When the glideslope needle is about 1/3 above the center, you must press the ALT button. The ALT indication will go away and only the GS will be visible (regarding the vertical navigation). Then the aircraft will follow the GS to the ground.

Yes. Wiper operation is fully custom. I'll have a look for the custom controls and get back to you.

Known bug, and will be addressed in the next update.

Should be out very soon.

https://www.thresholdx.net/news/rwdc93

Yes.

You are doing nothing wrong. There are some dataref changes regarding GPU, that make it not to work. We will fix this with the 2.0.4 update, in the next weeks.

When will be released, you will download the new version installer, and that one will take care of everything.

I have fixed the issue I had, and already tested in 12.1.0b2. Needs a bit of clean up, testing for any unforeseen bugs, and then getting into release procedure. Here some late captures.

Currently, we are at the final stage before releasing the XP12 full compatible version. We will make sure that will be VR compatible, when will be released.

Show tablet, and go into Avanti menu and make sure that the Condition Lever Mode is set to HW AXES and not VR/MOUSE.

I don't have any good solution to offer, but I'll try myself to find what's possible to be done with that kind of setup. If nothing good turns out, I'll see if I can add some kind of option, in the next update, to help you.

See

We are planning, for a future update, to add support for controlling the mixture levers via axis. For pitch trim you must assign the mechanical commands. https://airfightergr.github.io/les_dc3_docs/commands/#pitch-trim. If flaps does not operate after take off, most probable cause is that you have exceeded flaps speed limits, and they have failed. Pay attention to the placarded limits on the panel. DC3 has fat, high lift wings, and if you're taking off without any passengers or cargo, and you are light on fuel, takes off very easily.

Wait... I was able to reproduce it and looking into this.

If you hide the Gizmo tool tray, does other plugins menus still flashing? I don't have to reproduce, so I have to ask you to do a few things to understand what's wrong.

Please try also the Modern aircraft to check if this happens to that one as well.

Is this happening only with DC-3? You can disable Gizmo tool tray if you want by the Plugins menu -> Gizmo.

I assume that you in windows right?