ghw Posted November 15, 2015 Report Posted November 15, 2015 (edited) I just had a clean install of X-plane and SMP v3. After installing SMP v3, X-plane crashes on start-up. By the way, I've used SMP v2 on X-Plane previously and it worked fine. Here's the last few lines of the log.txt in my X-plane folder: 0:01:03.018 D/ATC: p2(N02XP): Maintain 2998ft0:01:03.018 I/FLT: Init dat_p3 type:loc_ram apt:WMKK rwy:14L0:01:03.018 I/ATC: p3(N03XP) FP filed - WMKK to USTL at 10000 via VIH VAS TRN SMU CPN HHN KPS DWI MST CMA MHS TGO MIA LSO LSO97 IIM JHT TEZ DUKUM PRO LXA PIMIN MANKA PUTAN JAL SSB CHG AAR SNG LEH HTN SCH KHG MNS DINVO BLH KRG AST AMOLA BEDMU LETIK OMANA , type=2Gizmo64: OpenGL<->Physics Offset Default Init: 19781.521, -83.378, 29052.416Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!--=={This application has crashed because of the plugin: SilverLining}==-- Has anyone else successfully run SMP v3 on X-plane Steam version? Edited November 15, 2015 by ghw Quote
Cameron Posted November 15, 2015 Report Posted November 15, 2015 What was the last aircraft you had loaded in your last flight before SMP 3 was installed? Quote
ghw Posted November 15, 2015 Author Report Posted November 15, 2015 What was the last aircraft you had loaded in your last flight before SMP 3 was installed? I had this aircraft loaded right before SMP3 was installed --> A320Neo by Jardesign (v2.5) - latest version I tried the following: 1. Removed A320neo from my aircrafts folder2. Start X-plane (success)3. In quick flight, select Cessna 172SP (stock aircraft)4. Real date and time set5. Real-weather and winds set6. Click "fly with these options" With the above steps, at least I can load X-plane all the way to the Quick flight menu. However, I'm still not able to start the actual flight. Here's the latest log:log.txt for X-Plane 10.41r3 (64-bit build 104102) compiled on Oct 9 2015 14:14:39X-Plane started on Sun Nov 15 09:28:30 2015This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.Windows 6.1 (build 7601/2) Service Pack 1.0This is a 64-bit version of Windows.CPU type: 8664Physical Memory (total for computer): 8379678720Maximum Virtual Memory (for X-Plane only): 8796092891136CPU 0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz Speed (mhz): 3199CPU 0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz Speed (mhz): 3199CPU 0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz Speed (mhz): 3200CPU 0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz Speed (mhz): 3200X-System folder:'C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/', case sensitive=0WGL_ARB_extensions_string WGL_ARB_pixel_format WGL_ATI_pixel_format_float WGL_ARB_pixel_format_float WGL_ARB_multisample WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_ARB_pbuffer WGL_ARB_render_texture WGL_ARB_make_current_read WGL_EXT_extensions_string WGL_ARB_buffer_region WGL_EXT_framebuffer_sRGB WGL_ATI_render_texture_rectangle WGL_EXT_pixel_format_packed_float WGL_I3D_genlock WGL_NV_swap_group WGL_ARB_create_context WGL_AMD_gpu_association WGL_AMDX_gpu_association WGL_ARB_create_context_profile WGL_ARB_context_flush_control WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_float_bufferOpenGL Vendor : ATI Technologies Inc.OpenGL Render : AMD Radeon R7 200 SeriesOpenGL Version : 4.5.13399 Compatibility Profile Context 15.200.1062.1004 (450/13399)OpenGL Extensions: GL_AMDX_debug_output GL_AMD_blend_minmax_factor GL_AMD_conservative_depth GL_AMD_debug_output GL_AMD_depth_clamp_separate GL_AMD_draw_buffers_blend GL_AMD_framebuffer_sample_positions GL_AMD_gcn_shader GL_AMD_gpu_shader_int64 GL_AMD_interleaved_elements GL_AMD_multi_draw_indirect GL_AMD_name_gen_delete GL_AMD_occlusion_query_event GL_AMD_performance_monitor GL_AMD_pinned_memory GL_AMD_query_buffer_object GL_AMD_sample_positions GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_atomic_counter_ops GL_AMD_shader_stencil_export GL_AMD_shader_stencil_value_export GL_AMD_shader_trace GL_AMD_shader_trinary_minmax GL_AMD_sparse_texture GL_AMD_sparse_texture_pool GL_AMD_stencil_operation_extended GL_AMD_texture_cube_map_array GL_AMD_texture_texture4 GL_AMD_transform_feedback3_lines_triangles GL_AMD_transform_feedback4 GL_AMD_vertex_shader_layer GL_AMD_vertex_shader_viewport_index GL_ARB_ES2_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_compute_shader GL_ARB_conditional_render_inverted GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_indirect GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counters GL_ARB_shader_bit_encoding GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_stencil_export GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_shadow_ambient GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_snorm GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_envmap_bumpmap GL_ATI_fragment_shader GL_ATI_separate_stencil GL_ATI_texture_compression_3dc GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_ATI_texture_mirror_once GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_buffer GL_EXT_copy_texture GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texgen_reflection GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_bptc GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_IBM_texture_mirrored_repeat GL_INTEL_fragment_shader_ordering GL_KHR_context_flush_control GL_KHR_debug GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_explicit_multisample GL_NV_float_buffer GL_NV_half_float GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_OES_EGL_image GL_SGIS_generate_mipmap GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays GL_WIN_swap_hint WGL_EXT_swap_controlthreaded_avail : 1 aniso_avail : 1 timer_avail : 1 sync/fence : 1pbo_avail : 1 frameblit_avail : 1gpu_shad4_avail : 1 shad_lod_avail : 1 array_tex_avail : 1 texture_rg : 1tex_float_avail : 1 seamless_avail : 1 drawbuf2_avail : 1 packed_stencil : 1framebuffer_srgb : 1 copy_buf_avail : 1 ubo_avail : 1 gshader_avail : 1instance_avail : 1 dis_fog_avail : 0 pinned_avail : 1 debug_avail : 1max tex units : 32 (32/16)max iso filtering: 16.000000max texture size : 16384 (hardware limit)max point size : 63.000000idx in vram : 1GLSL Version :4.40/440first-gen shaders: 0(29/16384/128/192/32/16384/16384)This video card is: DX10 or 11 - With instancingCPU count : 4OpenAL loaded: Resources/dlls/64/openal32.dllOpenAL devices: OpenAL SoftOpen AL default device:OpenAL SoftOpenAL vendor : OpenAL CommunityOpenAL renderer : OpenAL SoftOpenAL version : 1.1OpenAL hardware : OpenAL SoftOpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFTX_device_clock ALC_SOFTX_HRTF ALC_SOFT_loopback ALC_SOFTX_midi_interface ALC_SOFT_pause_device AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_block_alignment AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFT_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points AL_SOFT_MSADPCM AL_SOFT_source_latency AL_SOFT_source_lengthFetching plugins for C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/pluginsLoaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).Gizmo64: v14.12.31.0101 Windows Starting up... built: Jun 12 2015, 02:51:49Gizmo64: X-Plane Folder: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/)Gizmo64: Loading..Gizmo64: Graphics Init..Gizmo64: Finding Common DataRefs..Gizmo64: Creating menus..Gizmo64: XPluginStart() complete.Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl (gizmo.x-plugins.com).No SkyMAXX configuration file found; using default settings.Loaded: C:\Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/SilverLining/64/win.xpl (SilverLiningV3.Clouds).Gizmo64: Plugin Enable..Gizmo64: Init http thread..Gizmo64: Init Mapping..Gizmo64: Init cURL.Gizmo64: Calling gizmo_Start().Gizmo64: OpenAL: Using shared OpenAL context..Gizmo64: Machine ID:(d2db39138bacfd365186688b7cb34f90)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (plugins/EZ-DRM/Icon.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (CRJ200_icon.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)Gizmo64: LoadFirmware() completed.Gizmo64: Register Callbacks..Gizmo64: Register key sniffer..Gizmo64: Building Mouse Trap..Gizmo64: Plugin Enabled.SkyMaxx Pro: SilverLining initialized OK.Initializing off screen memory.Initializing off screen memory complete.I found the following scenery packages (prioritized in this order): 0 Custom Scenery/Aerosoft - EBBR Brussels/ 1 Custom Scenery/Aerosoft - EDDF Frankfurt/ 2 Custom Scenery/Aerosoft - EDDM Munich/ 3 Custom Scenery/Aerosoft - EDDT Berlin Tegel/ 4 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/ 5 Custom Scenery/Aerosoft - EGBB Birmingham/ 6 Custom Scenery/Aerosoft - EGKK London-Gatwick/ 7 Custom Scenery/Aerosoft - EGLL Heathrow/ 8 Custom Scenery/Aerosoft - EGPF Glasgow/ 9 Custom Scenery/Aerosoft - EGSS London-Stansted/ 10 Custom Scenery/Aerosoft - EIDW Dublin/ 11 Custom Scenery/Aerosoft - LEBL Barcelona/ 12 Custom Scenery/Aerosoft - LEMD Madrid/ 13 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/ 14 Custom Scenery/Aerosoft - LFPG Paris CDG/ 15 Custom Scenery/Aerosoft - LFPO Paris Orly/ 16 Custom Scenery/Aerosoft - LPFR Faro/ 17 Custom Scenery/Aerosoft - LSGG Genf/ 18 Custom Scenery/Global Airports/ 19 Custom Scenery/KLAL - Lakeland (airshow version)/ 20 Custom Scenery/KOSH - Wittman Regional (airshow version)/ 21 Custom Scenery/KSEA Demo Area/ 22 Custom Scenery/KSEA Demo Terrain/ 23 Custom Scenery/LOWI Demo Area/ 24 Global Scenery/Bug Fixes/ 25 Global Scenery/Extra Islands/ 26 Global Scenery/Recuts 1030/ 27 Global Scenery/X-Plane 10 Global Scenery/ 28 Resources/default scenery/1000 autogen/ 29 Resources/default scenery/1000 decals/ 30 Resources/default scenery/1000 forests/ 31 Resources/default scenery/1000 roads/ 32 Resources/default scenery/1000 urban terrain/ 33 Resources/default scenery/1000 world terrain/ 34 Resources/default scenery/700 roads/ 35 Resources/default scenery/900 beaches/ 36 Resources/default scenery/900 europe objects/ 37 Resources/default scenery/900 forests/ 38 Resources/default scenery/900 roads/ 39 Resources/default scenery/900 us objects/ 40 Resources/default scenery/900 world object placeholders/ 41 Resources/default scenery/airport decals/ 42 Resources/default scenery/airport scenery/ 43 Resources/default scenery/default apt dat/ 44 Resources/default scenery/default atc/ 45 Resources/default scenery/sim objects/ATC audio initialized.0:00:00.000 D/HID: HID Bridge Running0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 1.0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 1.0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 1.0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.0:00:00.000 I/REN: Setting |number of trees read from prefs as 2.0:00:00.000 I/REN: Setting |number of objects read from prefs as 3.0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.0:00:00.000 I/REN: Setting |number of cars read from prefs as 1.0:00:00.000 I/REN: Setting |world detail distance read from prefs as 4.0:00:00.000 I/REN: Setting |airport detail read from prefs as 1.0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 0.0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 1.0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 0.0:00:00.000 I/REN: Setting |shadow detail read from prefs as 1.0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 0.0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.0:00:00.000 I/REN: Setting |Extended DSF Scenery read from prefs as 0.0:00:00.000 I/NET: Wireless Network Connection 192.168.0.1020:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at WSAC and WSSS!0:00:00.000 W/ATC: Rewrote WSAC atc_ControllerRole_Gnd's freq: 12172 to 11800 for being in conflict!0:00:00.000 D/State: Received: 0:00:00:00.000 D/HID: Hardware ADDED(06a3, 0763) - Saitek Pro Flight Rudder Pedals at path \\?\hid#vid_06a3&pid_0763#6&3204260&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}0:00:00.000 I/JOY: REGISTER Joystick device: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891, this is a familiar device.0:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x8c862910. Min/Max 0 - 1270:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x8c862910. Min/Max 0 - 1270:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0035) for handle: 0x8c862910. Min/Max 0 - 5110:00:00.000 D/HID: END HARDWARE0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891 Axis #0: device min/max (0.000000 - 127.000000) calib (0.000000 - 0.000000)0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891 Axis #1: device min/max (0.000000 - 127.000000) calib (0.000000 - 0.000000)0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Rudder Pedals - VID:1699PID:1891 Axis #2: device min/max (0.000000 - 511.000000) calib (0.000000 - 0.000000)0:00:00.000 D/HID: Hardware ADDED(06a3, 0bac) - Saitek Pro Flight Yoke at path \\?\hid#vid_06a3&pid_0bac#7&4ed8a98&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}0:00:00.000 I/JOY: REGISTER Joystick device: Saitek Pro Flight Yoke - VID:1699PID:2988, this is a familiar device.0:00:00.000 D/HID: BUTTON Added Index: 0 (0009, 0001) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 1 (0009, 0002) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 2 (0009, 0003) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 3 (0009, 0004) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 4 (0009, 0005) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 5 (0009, 0006) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 6 (0009, 0007) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 7 (0009, 0008) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 8 (0009, 0009) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 9 (0009, 000a) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 10 (0009, 000b) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 11 (0009, 000c) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 12 (0009, 000d) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 13 (0009, 000e) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 14 (0009, 000f) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 15 (0009, 0010) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 16 (0009, 0011) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 17 (0009, 0012) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 18 (0009, 0013) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 19 (0009, 0014) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 20 (0009, 0015) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 21 (0009, 0016) for handle: 0x8c8633900:00:00.000 D/HID: BUTTON Added Index: 22 (0009, 0017) for handle: 0x8c8633900:00:00.000 D/HID: AXIS Added Index: 0 (0001, 0031) for handle: 0x8c863390. Min/Max 0 - 10230:00:00.000 D/HID: AXIS Added Index: 1 (0001, 0030) for handle: 0x8c863390. Min/Max 0 - 10230:00:00.000 D/HID: AXIS Added Index: 2 (0001, 0034) for handle: 0x8c863390. Min/Max 0 - 2550:00:00.000 D/HID: AXIS Added Index: 3 (0001, 0033) for handle: 0x8c863390. Min/Max 0 - 2550:00:00.000 D/HID: AXIS Added Index: 4 (0001, 0032) for handle: 0x8c863390. Min/Max 0 - 2550:00:00.000 D/HID: HATSWITCH Added Index: 0 (0001, 0039) for handle: 0x8c863390. It has 8 positions.0:00:00.000 D/HID: END HARDWARE0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #0: device min/max (0.000000 - 1023.000000) calib (0.500489 - 0.500489)0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: Saitek Pro Flight Yoke - VID:1699PID:2988 Axis #1: device min/max (0.000000 - 1023.000000) calib (0.500489 - 0.500489)0:01:35.338 I/ACF: Loading airplane number 0 with Aircraft/General Aviation/Cessna 172SP/Cessna_172SP.acfGizmo64: Aircraft Changed..Gizmo64: Aircraft name: (Cessna_172SP.acf)Gizmo64: Aircraft path: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/General Aviation/Cessna 172SP/)Gizmo64: gizmo_Restart()Gizmo64: Shutting down Lua VMGizmo64: Releasing X-Plane overrides: sim/operation/override/* Gizmo64: Reboot count: 0Gizmo64: OpenAL: Using shared OpenAL context..Gizmo64: Machine ID:(d2db39138bacfd365186688b7cb34f90)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/General Aviation/Cessna 172SP/plugins/EZ-DRM/Icon.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Aircraft/General Aviation/Cessna 172SP/CRJ200_icon.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/MaxxFX/product_registration.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/SoundMaxx/product_registration.png)Gizmo64: gizmo_loadPngImage(...): Failed: 404: (C:/Program Files (x86)/Steam/steamapps/common/X-Plane 10/Resources/plugins/SeasonsXP/product_registration.png)Gizmo64: LoadFirmware() completed.Gizmo64: Aircraft Author: www.dmax3d.comGizmo64: Aircraft Descrip: Cessna 172 SP SkyHawk - 180HPGizmo64: Could not find ./scripts/deployment.keyGizmo64: Community Edition.Gizmo64: LuaVM: OnKickStart()Gizmo64: Completed gizmo_RestartERROR: object Aircraft/Heavy Metal/C-130/objects/C130_Wings.OBJ has illegal param light airplane_Landing_flareERROR: object Aircraft/Heavy Metal/C-130/objects/C130_Wings.OBJ has illegal param light airplane_Landing_flare0:01:35.338 I/GPS: Added 19137 airports to the GPS database0:01:35.338 I/FLT: Init dat_p0 type:loc_tak apt:WMKK rwy:14R0:01:35.338 I/SCN: DSF load time: 2104788 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+02+100.dsf (85062 tris)0:01:35.338 I/SCN: DSF load time: 416978 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+03+100.dsf (10426 tris)0:01:35.338 I/SCN: DSF load time: 2837162 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+02+102.dsf (154910 tris)0:01:35.338 I/SCN: DSF load time: 1223832 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+02+101.dsf (88726 tris)0:01:35.338 I/SCN: DSF load time: 114 for file Custom Scenery/Global Airports/Earth nav data/+00+100/+03+101.dsf (0 tris)0:01:35.338 I/SCN: DSF load time: 2243984 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+03+101.dsf (171324 tris)0:01:35.338 I/SCN: DSF load time: 1975520 for file Global Scenery/X-Plane 10 Global Scenery/Earth nav data/+00+100/+03+102.dsf (163208 tris)0:01:55.854 D/State: Received: 0:60:01:56.316 I/ACF: Loading airplane number 1 with Aircraft/Heavy Metal/C-130/C-130.acf0:01:56.316 I/FLT: Init dat_p1 type:loc_general_area lat:3.196561 lon:101.363640 ele(ft):16875.392578 psi:292.442993 spd(kts):195.9434810:01:56.316 I/ACF: Loading airplane number 2 with Aircraft/Heavy Metal/B747-100 NASA/B747-100 NASA.acf0:01:56.316 E/SCN: Failed to find resource 'Panel.png', referenced from file 'Aircraft/Heavy Metal/B747-100 NASA/'.0:01:56.316 E/SCN: Failed to find resource 'Panel.png', referenced from file 'Aircraft/Heavy Metal/B747-100 NASA/'.0:01:56.316 I/FLT: Init dat_p2 type:loc_general_area lat:2.485567 lon:102.180092 ele(ft):30514.394531 psi:217.667786 spd(kts):167.2893520:01:56.316 I/ACF: Loading airplane number 3 with Aircraft/Helicopters/Bell 206/Jetranger.acf0:01:56.316 I/FLT: Init dat_p3 type:loc_general_area lat:3.548364 lon:101.738571 ele(ft):17685.828125 psi:234.730072 spd(kts):23.6367530:01:56.316 I/FLT: Init dat_p1 type:loc_ram apt:WMKK rwy:14R0:01:56.316 I/ATC: p1(N01XP) FP filed - WMKK to ETSA at 24000 via VIH VAS TRN STN CPN HHN KPS DWI MST HGU TGO MIA MDY IIM BPN PRO NONIM KTM BWA NGJ KADAS SKA JJP LKA LUN MT ZB RIMPA KBL TRZ LBA TMD URG QK VAGRO DOKAM KEKUN AKB ORN URL GITEK IGK PNZ IWV MAGUL OTMET VTB MNS PNK SIE KRN TRZ KOPIT BAY MAH , type=20:01:56.316 I/ATC: p2(N02XP) Popup FP filed to WMKK at 5000 via , type=20:01:56.316 D/ATC: Validating altitude for p2(N02XP): filed: 5000 usable_rte_dist: 8.574056 maxDescent: 2000 maxAlt: 3000 minAlt: 5000 chosen_alt: 30000:01:56.316 W/ATC: Setting route alt to 3000 because they filed too high for a descent!0:01:56.316 D/ATC: p2(N02XP): Cleared IFR0:01:56.316 I/FLT: Init dat_p2 type:loc_specify_lle lat:2.761861 lon:101.862663 ele(ft):5000.000000 psi:257.000000 spd(kts):273.7500000:01:56.316 D/ATC: p2(N02XP): FlyToPoints0:01:56.316 D/ATC: p2(N02XP): Maintain 2998ft0:01:56.316 I/FLT: Init dat_p3 type:loc_ram apt:WMKK rwy:14L0:01:56.316 I/ATC: p3(N03XP) FP filed - WMKK to USTL at 10000 via VIH VAS TRN SMU CPN HHN KPS DWI MST CMA MHS TGO MIA LSO LSO97 IIM JHT TEZ DUKUM PRO LXA PIMIN MANKA PUTAN JAL SSB CHG AAR SNG LEH HTN SCH KHG MNS DINVO BLH KRG AST AMOLA BEDMU LETIK OMANA , type=2Gizmo64: OpenGL<->Physics Offset Default Init: 19782.822, -84.718, 29052.396Gizmo64: Tried to use physics engine without loading an OBJ8 file. Ignored, can't draw!--=={This application has crashed because of the plugin: SilverLining}==-- Quote
sundog Posted November 15, 2015 Report Posted November 15, 2015 That's really weird; I've never seen anything like that before. It looks like it's crashing before it even tries to draw anything. Start by removing the settings.dat file inside X-Plane's Resources/plugins/SilverLining folder, and then try again. My best guess is that your settings file is somehow corrupt, and telling Skymaxx Pro to do something nonsensical as a result. Next step would be to re-install SkyMaxx Pro 3, as I'm still leaning toward a corrupt file system of some sort here. Thousands of people are using SkyMaxx Pro 3 successfully and this is the first crash of this nature I've seen, so I think something really unusual is going on. A filesystem problem would fit the facts. As a final step, updating your video drivers is also somewhat likely to help, if they are out of date. Hopefully one of those steps will clear things up. If not, please let us know the specifics of your video card model and what driver version you have installed. Quote
ghw Posted November 15, 2015 Author Report Posted November 15, 2015 That's really weird; I've never seen anything like that before. It looks like it's crashing before it even tries to draw anything. Start by removing the settings.dat file inside X-Plane's Resources/plugins/SilverLining folder, and then try again. My best guess is that your settings file is somehow corrupt, and telling Skymaxx Pro to do something nonsensical as a result. Next step would be to re-install SkyMaxx Pro 3, as I'm still leaning toward a corrupt file system of some sort here. Thousands of people are using SkyMaxx Pro 3 successfully and this is the first crash of this nature I've seen, so I think something really unusual is going on. A filesystem problem would fit the facts. As a final step, updating your video drivers is also somewhat likely to help, if they are out of date. Hopefully one of those steps will clear things up. If not, please let us know the specifics of your video card model and what driver version you have installed. Thanks for your reply. I could not find settings.dat in the directory you gave. Is this correct "C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Resources\plugins\SilverLining" ? I have also tried this (just in case the settings.dat was not installed properly). 1. Run the uninstaller "C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\X-Aviation\Uninstall SkyMaxx Pro.exe".2. Run the installer which I download from X-Aviation "setup-windows.exe"3. During install, X-plane folder is chosen as "C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10"4. Install is successful.5. Rerun X-plane. Successfully reach the quick flight menu. After that, it crashes.6. Check the SilverLining plugins folder. It still does not have settings.dat. Note: This PC is a clean install of Windows 7 (reformat). All windows updates have been installed, with the latest ATI driver. No add-ons were installed in X-plane other than A320neo by Jardesign which I have removed from the Aircrafts folder for this test. I've attached a Word document to show my screenshots step by step. Here are my graphic card details:Sapphire ATI Radeon R7 260X (2GB DDR5)Catalyst version: 15.7.1**I have the full details in the Word documentStep by step.zip Quote
sundog Posted November 15, 2015 Report Posted November 15, 2015 I could not find settings.dat in the directory you gave. Is this correct "C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Resources\plugins\SilverLining" ? You are looking in the right place, I think. What should happen is settings.dat should be written the first time you run with SkyMaxx Pro with a set of default settings, but apparently it's not even getting that far. I wonder if you are running X-Plane as a user that does not have write permissions to C:\Program Files (x86)\Steam\steamapps\common\X-Plane 10\Resources\plugins\SilverLining folder. Check the permissions on that folder. You may need to change them, or run as administrator - but I'm just guessing. One thing that *might* work is starting with clear weather selected, which should result in SkyMaxx Pro doing pretty much nothing. If that lets you start up, that will give you an opportunity to bring up the SkyMaxx Pro configuration panel, and turn off all of the extra options like cloud reflections, shadows, terrain blending, lens flare, and crepuscular rays. If you can then successfully introduce a cumulus cloud layer into the scene, we can at least start narrowing down what feature it is your system doesn't seem to like. If, at this point, you're still having trouble - there is one bit of new code in SkyMaxx Pro 3 that is specific to AMD video cards. It seems to work for everyone else, but I created a special build for you that removes it, as a test. Just download this file: http://media.sundog-soft.com/test/win.xpl and place it in X-Plane's resources/plugins/silverlining/64 directory, replacing the one that's there. If that fixes it, then I know what's going on. Quote
ghw Posted November 15, 2015 Author Report Posted November 15, 2015 Hi Frank, It worked! After replacing win.xpl with the copy you provided, I was able to enter the flight and activate SMP. Thanks for the prompt responses Quote
sundog Posted November 15, 2015 Report Posted November 15, 2015 It worked! After replacing win.xpl with the copy you provided, I was able to enter the flight and activate SMP. Hmmmmm!!!! May I ask you to try one more experiment? See if this build also works: http://media.sundog-soft.com/test/xplane/win.xpl If so, we'll issue a patch using it for others who may share your configuration. If not, you can go back to using the one in my previous post instead for now. Quote
ghw Posted November 15, 2015 Author Report Posted November 15, 2015 Hi Frank, Hmmmmm!!!! May I ask you to try one more experiment? See if this build also works: http://media.sundog-soft.com/test/xplane/win.xpl If so, we'll issue a patch using it for others who may share your configuration. If not, you can go back to using the one in my previous post instead for now. I uninstalled, cleared the folders, and re-installed. Replaced the win.xpl with the one above and it does not work. Same issue where it crashes on startup. Let me know if you need more tests. Quote
sundog Posted November 15, 2015 Report Posted November 15, 2015 Thanks for working with us on this. Your results tell me that the crash is probably originating deep within the bowels of your video driver or operating system, while we're trying to measure the amount of free video memory on your card. I think this is an extremely rare problem, but in case others run into it and come across this thread, I'll summarize: - If you are getting a crash after installing Skymaxx Pro 3 immediately upon starting a flight, your log.txt file indicates a crash within the "SilverLining" plugin, and you are running Windows with an AMD video card, try replacing your Resources/plugins/SilverLining/64/win.xpl file with this one: http://media.sundog-soft.com/test/win.xpl This version will disable video memory monitoring on Windows/AMD systems, avoiding the issue. If that helps others, please comment in this thread to let us know. It will help us gauge how widespread this issue really is. Quote
alexdm Posted November 29, 2015 Report Posted November 29, 2015 Thanks for working with us on this. Your results tell me that the crash is probably originating deep within the bowels of your video driver or operating system, while we're trying to measure the amount of free video memory on your card. I think this is an extremely rare problem, but in case others run into it and come across this thread, I'll summarize: - If you are getting a crash after installing Skymaxx Pro 3 immediately upon starting a flight, your log.txt file indicates a crash within the "SilverLining" plugin, and you are running Windows with an AMD video card, try replacing your Resources/plugins/SilverLining/64/win.xpl file with this one: http://media.sundog-soft.com/test/win.xpl This version will disable video memory monitoring on Windows/AMD systems, avoiding the issue. If that helps others, please comment in this thread to let us know. It will help us gauge how widespread this issue really is. Same here. I tried all these different "win.xpl" files but no success. Still Silverlining makes XPlane crashing at start (and I have an AMD ATI Card HD 7900 series) . Attached is my log.Log.txt Quote
ghw Posted November 29, 2015 Author Report Posted November 29, 2015 Same here. I tried all these different "win.xpl" files but no success. Still Silverlining makes XPlane crashing at start (and I have an AMD ATI Card HD 7900 series) . Attached is my log. Try this:1. Install this: http://www.microsoft.com/en-us/download/details.aspx?id=146322. Install latest Java JRE at java.com Post back here whether it works or not. Quote
Cameron Posted November 29, 2015 Report Posted November 29, 2015 Try this: 1. Install this: http://www.microsoft.com/en-us/download/details.aspx?id=14632 2. Install latest Java JRE at java.com Post back here whether it works or not. Why are you recommending this? Our products don't use Java... Quote
ghw Posted November 29, 2015 Author Report Posted November 29, 2015 Why are you recommending this? Our products don't use Java... I'm sorry, but I should have made my post clearer. What I meant was, I solved the problem after doing the 2 steps above. However, I failed to mention that I did not narrow down to find out which of the two solved the problem (if they did, at all!) But I definitely managed to make it work without using the win.xpl file posted by Frank. Quote
sundog Posted November 29, 2015 Report Posted November 29, 2015 It's possible that installing the Visual Studio 2010 x64 runtimes would solve this sort of problem. Java not so much. Hopefully that helps Alex - if it's not that or the issue solved by http://media.sundog-soft.com/test/xplane/win.xpl, I'm not sure what it is. Double check you installed that win.xpl file to the right location.... Quote
alexdm Posted November 29, 2015 Report Posted November 29, 2015 It's possible that installing the Visual Studio 2010 x64 runtimes would solve this sort of problem. Java not so much. Hopefully that helps Alex - if it's not that or the issue solved by http://media.sundog-soft.com/test/xplane/win.xpl, I'm not sure what it is. Double check you installed that win.xpl file to the right location....thank you.I have installed both Visual Studio 2012 x86 and x64 redistributable. Is it the same than 2010? The whole story of what happened is the following: SMP 3 was working fine. Then a couple of days ago I got a notification to update my AMD Radeon HD 7900 series driver. I update the driver but my monitor (a 28 inches DVI TV) becomes black and i cant see anything. Then with a smaller monitor I managed to roll back the driver, uninstall it but still nothing. Then I did a System Restore to about a month ago. Monitor is now back in life but as I launch XP it crashes. I try removing all plug ins and it works fine. I put them back one at the time, all fine until i get to the Silver Lining folder. That's it. As soon as i put back Silver Lining in the plugin folder XP crashes at start. Without all fine. Also the log shows crash because Silver Lining. Now I am rather worried because I purchased SMP 3 and I would like to use it not to throw the money down in the toilet possibly ;-) Thanks for your help. Quote
alexdm Posted November 29, 2015 Report Posted November 29, 2015 Guys -- I have just done the most obvious of things that stupidly I didnt think to do that before. I uninstalled and reinstalled SMP 3 back. And now it is working! Thanks for your help and apologies for using your resources to find a solution which was around the corner. BestAlex Quote
sundog Posted November 30, 2015 Report Posted November 30, 2015 Bizarre! Glad it's working again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.