jeanfrancoisderrien Posted January 28, 2022 Report Share Posted January 28, 2022 I uninstalled the CL 650, delete the CL650 folder in Output. (I did it twice) I reinstalled by starting with the navigraph box checked, in career mode. Still no cards. On the other hand, they are displayed well in Avitab! I just redid a test on my backup XP. If I got the pop'up window to link the CL650 with Navigraph, from the launch, I still don't have the maps. It's really a shame, because everything works fine, apart from this problem. (and I don't like not to understand...) I opened a ticket on X-Aviation, but they refer me to the x-Pilot forum Quote Link to comment Share on other sites More sharing options...
ois650 Posted January 28, 2022 Report Share Posted January 28, 2022 Hello, Please confirm you have done the following: 1. Set up your Navigraph Charts in User Settings, and Navigraph has authorised the CL650 to access charts. 2. You have selected "CHART" on the right side CCP Brgds Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted January 29, 2022 Author Report Share Posted January 29, 2022 Yes quite On 35 to 40 tries of I only saw the cards two or three times Otherwise I have either a black screen or a "xxxx-No chart Available" screen I uninstalled all the plugins: still no maps I installed on new X-Plane: still no maps I'm on Windows 11. Could this be a problem? thank you for your reply Quote Link to comment Share on other sites More sharing options...
Pils Posted February 1, 2022 Report Share Posted February 1, 2022 On 1/29/2022 at 5:06 AM, jeanfrancoisderrien said: Yes quite On 35 to 40 tries of I only saw the cards two or three times Otherwise I have either a black screen or a "xxxx-No chart Available" screen I uninstalled all the plugins: still no maps I installed on new X-Plane: still no maps I'm on Windows 11. Could this be a problem? thank you for your reply Could you provide your Log.txt from a sim session where this fails. Thanks. Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 1, 2022 Author Report Share Posted February 1, 2022 Yes quite On 35 to 40 tries of I only saw the cards two or three times Otherwise I have either a black screen or a "xxxx-No chart Available" screen I uninstalled all the plugins: still no maps I installed on new X-Plane: still no maps I'm on Windows 11. Could this be a problem? thank you for your reply Log.7z Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 2, 2022 Author Report Share Posted February 2, 2022 After clic " visit web " !!! Pils , help me , please Log.txt Quote Link to comment Share on other sites More sharing options...
Pils Posted February 2, 2022 Report Share Posted February 2, 2022 (edited) 2 hours ago, jeanfrancoisderrien said: After clic " visit web " !!! Log.txt Pils , help me , please Could you possible install a second copy of XP and run this test again without any extra plugins or scenery, please? The log is very full and hard to debug. The installers from Laminar and X-Aviation allow a second copy. Edited February 2, 2022 by Pils Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 5, 2022 Author Report Share Posted February 5, 2022 On 02/02/2022 at 20:15, Pils said: Pourriez-vous installer une deuxième copie de XP et relancer ce test sans plugins ou décors supplémentaires, s'il vous plaît ? Le journal est très complet et difficile à déboguer. Les installateurs de Laminar et X-Aviation permettent une deuxième copie. Hello Pils I put back the log1, which follows a new installation of X-Plane, without any plugin There are many error lines on FMOD . Why ? and there is : 2022-02-01 17:29:27 CL650[chart_prov_common.c:198]: Error downloading chart index https://aeronav.faa.gov/d-tpp/1802/xml_data/d-TPP_Metafile.xml: HTTP error 404 thank you for your help Log1.txt Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 5, 2022 Author Report Share Posted February 5, 2022 I think I found the problem, because now it works on both my XP. The problem came from me, to my great shame When I entered the flight plan, in POS INIT, I was not waiting for the GNSS alignment. I simply copied the coordinates displayed opposite the start. I even think that when I tried to display the maps, the GNSS were not aligned! hence the error messages I did several tests while waiting for the GNSS and each time it works. Thank you PILS for your help and sorry for this false problem Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 5, 2022 Author Report Share Posted February 5, 2022 Once again after stopping XP which was working well, after restarting XP the maps are not displayed, despite waiting for the alignment of the GNSS Here's how I did it: This morning : 1°) Installing a new version of XP / No plugins Installing the CL650 Launch XP and cl 650 Click on "visit website" Navigraph several times After two to three minutes opening pop'up window in XP indicating the launch of Navigraph. Navigraph screen asking me to authorize the link with XP --> OK XP shutdown Log after these operations: 1_Log après navigraph ok.txt 2°) XP reboot CL650 loading with same airframe, same airport Battery , AC/DC , APU started Came an FPL (without loading airacs, because not installed) Departure, sid, star, arrival Deleted discontinuity Charts visible on the co-driver side Stop XP Log after these operations: 2_Log après avoir entré FPL.txt 3°) Airacs Update Feb 2022 Booted XP and CL 650 Changed airframe Activate airacs in "Status" Entered same FPL (idem 2) Charts visible on the co-driver side Log after these operations:3_Graphes d'affichage des logs OK.txt Closing XP This afternoon : 4°) Getting Started XP Joystick Calibration Started CL 650 with new aiframe on new airport GNSS aligned Entered FPL (Start, sid, star, finish, deleted discontinuity) No maps displayed on the pilot side !!!!!!!!!!! Log after these operations: 4_Log NO CHARTS.txt Hoping that with all this you can find a solution Thank you Quote Link to comment Share on other sites More sharing options...
Pils Posted February 5, 2022 Report Share Posted February 5, 2022 Deleting the CL650 directory from Output will reset your user settings including any charts service selections and authentication data. You’re 100% sure you reset your settings afterwards? Also, clicking the “visit” button isn’t what brings up the authentication page, it’s the act of turning on the power to the FMS(es) and it determining an (re)authentication is required. Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 6, 2022 Author Report Share Posted February 6, 2022 I reinstalled following your instructions. At each of my tests I delete the main CL650 folder + the CL650 folder in "Output" + the CL650 folder in "Output --->Caches", first of all I then install the CL650 with CL-650-xindows-x64-installer.exe I run XP I choose a new flight, select the standard CL650 and the departure airport I start the flight I select "career mode" I do not change anything in the next window I do "Enter FBO" then "Confirm" I enter my credentials in X-Aviation Licensing I'm waiting for X-Aviation validation In the "Master Warning" window which is opened, click on "YES, KEEP IT LOUD!" I advance to the tarmac I open the "User Settings" window ---> "Networking" I check the Navigraph box I uncheck the Aeronav.faa box I enter my simbreaf ID ( 53100 ) I close the "User settings" window I open the door, enter the cockpit, request External AC and DC Battery start, then AC then ..... A WINDOW HAS OPENED TO MAKE THE LINK WITH NAVIGRAPH. VALIDATION DONE AC/DC Utility set to ON FMS: Airacs status update. Enter the FPL Map consultation on the co-pilot side: "LFBO-NO CHART COVERAGE AVAILABLE" I do not understand anything ! Should we restart the simulator or the computer once the Navigrah validation is done? I also tried by removing the "Preferences" folder in "Output" , without result I am attaching my log following this negative test... Sorry to bother you with this problem. Log.txt Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 6, 2022 Author Report Share Posted February 6, 2022 I tried again just after shutting down and restarting XP, started another flight somewhere else, changed airframe and entered new FPL No Navigraph link message No map displayed By checking the "User Settings" I found that my Simbreaf ID was 0 !!! Why did he change, I don't know. What is on, it is not me! We can't change it and I have to go back to the FBO Then tried again with the correct ID, but still no card displayed Quote Link to comment Share on other sites More sharing options...
Pils Posted February 6, 2022 Report Share Posted February 6, 2022 Sounds like maybe your X-Plane directory or sub-directories, e.g. Output, may have been set to read-only by Windows. But I don’t see any complaints in the log. Could you PRIVATE message me your e-charts.cfg, please? Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 7, 2022 Author Report Share Posted February 7, 2022 I privately sent you the .cfg file I did a fresh install on another SSD. At the first launch I have the Cl650 / Navigraph link window which opens and which I validate. Then I can see the cards If I close and restart XP and the CL650, the maps are no longer displayed, as if the link had not been saved .... but it does not offer me to send a new link! Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 7, 2022 Author Report Share Posted February 7, 2022 I just did the last try I did a fresh install of XP on my system C drive: I also changed browser (Edge instead of Firefox) After charging the CL650, battery, AC/DC, the connection window with opened. I validated and after loading an FPL the maps are displayed correctly (KSEA) I restarted XP, loaded a new airframe on a new airport, entered a new FPL and the maps no longer appear! I restarted XP with the first airframe on the same airport as the first time (KSEA) and the maps are no longer displayed Quote Link to comment Share on other sites More sharing options...
jeanfrancoisderrien Posted February 8, 2022 Author Report Share Posted February 8, 2022 Same problem with version 1.3.1 The cards are displayed the first time, then nothing! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.