jeanfrancoisderrien

Same problem with version 1.3.1 The cards are displayed the first time, then nothing!

I just did the last try I did a fresh install of XP on my system C drive: I also changed browser (Edge instead of Firefox) After charging the CL650, battery, AC/DC, the connection window with opened. I validated and after loading an FPL the maps are displayed correctly (KSEA) I restarted XP, loaded a new airframe on a new airport, entered a new FPL and the maps no longer appear! I restarted XP with the first airframe on the same airport as the first time (KSEA) and the maps are no longer displayed

I privately sent you the .cfg file I did a fresh install on another SSD. At the first launch I have the Cl650 / Navigraph link window which opens and which I validate. Then I can see the cards If I close and restart XP and the CL650, the maps are no longer displayed, as if the link had not been saved .... but it does not offer me to send a new link!

I tried again just after shutting down and restarting XP, started another flight somewhere else, changed airframe and entered new FPL No Navigraph link message No map displayed By checking the "User Settings" I found that my Simbreaf ID was 0 !!! Why did he change, I don't know. What is on, it is not me! We can't change it and I have to go back to the FBO Then tried again with the correct ID, but still no card displayed

I reinstalled following your instructions. At each of my tests I delete the main CL650 folder + the CL650 folder in "Output" + the CL650 folder in "Output --->Caches", first of all I then install the CL650 with CL-650-xindows-x64-installer.exe I run XP I choose a new flight, select the standard CL650 and the departure airport I start the flight I select "career mode" I do not change anything in the next window I do "Enter FBO" then "Confirm" I enter my credentials in X-Aviation Licensing I'm waiting for X-Aviation validation In the "Master Warning" window which is opened, click on "YES, KEEP IT LOUD!" I advance to the tarmac I open the "User Settings" window ---> "Networking" I check the Navigraph box I uncheck the Aeronav.faa box I enter my simbreaf ID ( 53100 ) I close the "User settings" window I open the door, enter the cockpit, request External AC and DC Battery start, then AC then ..... A WINDOW HAS OPENED TO MAKE THE LINK WITH NAVIGRAPH. VALIDATION DONE AC/DC Utility set to ON FMS: Airacs status update. Enter the FPL Map consultation on the co-pilot side: "LFBO-NO CHART COVERAGE AVAILABLE" I do not understand anything ! Should we restart the simulator or the computer once the Navigrah validation is done? I also tried by removing the "Preferences" folder in "Output" , without result I am attaching my log following this negative test... Sorry to bother you with this problem. Log.txt

Once again after stopping XP which was working well, after restarting XP the maps are not displayed, despite waiting for the alignment of the GNSS Here's how I did it: This morning : 1°) Installing a new version of XP / No plugins Installing the CL650 Launch XP and cl 650 Click on "visit website" Navigraph several times After two to three minutes opening pop'up window in XP indicating the launch of Navigraph. Navigraph screen asking me to authorize the link with XP --> OK XP shutdown Log after these operations: 1_Log après navigraph ok.txt 2°) XP reboot CL650 loading with same airframe, same airport Battery , AC/DC , APU started Came an FPL (without loading airacs, because not installed) Departure, sid, star, arrival Deleted discontinuity Charts visible on the co-driver side Stop XP Log after these operations: 2_Log après avoir entré FPL.txt 3°) Airacs Update Feb 2022 Booted XP and CL 650 Changed airframe Activate airacs in "Status" Entered same FPL (idem 2) Charts visible on the co-driver side Log after these operations:3_Graphes d'affichage des logs OK.txt Closing XP This afternoon : 4°) Getting Started XP Joystick Calibration Started CL 650 with new aiframe on new airport GNSS aligned Entered FPL (Start, sid, star, finish, deleted discontinuity) No maps displayed on the pilot side !!!!!!!!!!! Log after these operations: 4_Log NO CHARTS.txt Hoping that with all this you can find a solution Thank you

I think I found the problem, because now it works on both my XP. The problem came from me, to my great shame When I entered the flight plan, in POS INIT, I was not waiting for the GNSS alignment. I simply copied the coordinates displayed opposite the start. I even think that when I tried to display the maps, the GNSS were not aligned! hence the error messages I did several tests while waiting for the GNSS and each time it works. Thank you PILS for your help and sorry for this false problem

Hello Pils I put back the log1, which follows a new installation of X-Plane, without any plugin There are many error lines on FMOD . Why ? and there is : 2022-02-01 17:29:27 CL650[chart_prov_common.c:198]: Error downloading chart index https://aeronav.faa.gov/d-tpp/1802/xml_data/d-TPP_Metafile.xml: HTTP error 404 thank you for your help Log1.txt

After clic " visit web " !!! Pils , help me , please Log.txt

Yes quite On 35 to 40 tries of I only saw the cards two or three times Otherwise I have either a black screen or a "xxxx-No chart Available" screen I uninstalled all the plugins: still no maps I installed on new X-Plane: still no maps I'm on Windows 11. Could this be a problem? thank you for your reply Log.7z

Yes quite On 35 to 40 tries of I only saw the cards two or three times Otherwise I have either a black screen or a "xxxx-No chart Available" screen I uninstalled all the plugins: still no maps I installed on new X-Plane: still no maps I'm on Windows 11. Could this be a problem? thank you for your reply

I uninstalled the CL 650, delete the CL650 folder in Output. (I did it twice) I reinstalled by starting with the navigraph box checked, in career mode. Still no cards. On the other hand, they are displayed well in Avitab! I just redid a test on my backup XP. If I got the pop'up window to link the CL650 with Navigraph, from the launch, I still don't have the maps. It's really a shame, because everything works fine, apart from this problem. (and I don't like not to understand...) I opened a ticket on X-Aviation, but they refer me to the x-Pilot forum

thank you jcallum do you know how to activate it ? how to have the pop-up window of X-Aviation to enter mail and serial ?

Good morning all I have been looking for several days to solve a problem with the TBM 900 It is impossible to reassemble the crash bar! I uninstalled and reinstalled version 1.11 without result I disabled all plugins without results I looked again at the tutorial: all the switches are OFF except Ignition. In this config it must be possible to raise the crash bar, except that with me it resets in the next second Can a user of this plane confirm to me that as soon as the plane is loaded, without touching anything, the crash bar can be raised? if not after what actions is it possible? I have a doubt that during the uninstall by the program "uninstall TBM 900" of the X-Aviation folder, all the files where folders are deleted. Besides, I manually delete the "Tbm900" folder located in "Output", as well as the TBM900_log.txt file is it normal to have this path in the log: E: \ X-Plane 11 \\ Output \ TBM900 \ state Any idea will be welcome! Thank you TBM900_Log.zip

I made a new test with UK south and center installed and I had a new XP crash When XP restarted, I accepted the repositioning of the plane and then it worked normally With a flight outside UK no problem LogTBM_ORBX.zip TBM900_Log_ORBX.zip

CTD today with version 1.1.3, before take-off: TBM900 [except.c: 171]: Caught EXCEPTION_ACCESS_VIOLATION XP11.30r1 - no plugins installed - no flyght plan ! Log.txt

When opening the doors using "Payload", the pilot's door freezes during opening and the sound turns in a loop. I have reloaded the plane to open all doors (this is the second time I have this problem) A bug? After applying the checklist, when releasing the parking brake, the nose of the plane is lifted !!!!!! A bug ? I am in version 11.30b1, without any plugin to install

This project seems interesting .... For the scenes of Nantucket and Plum Island, the seasons will be present?

Hello Daemotron I upgraded X-Plane 11.11r2 and reinstalled the Nantucket scenery. Everything is working correctly now Thanks for your help

It works this afternoon ... Log Nantucket.zip

Hi Cameron To answer your topic on the forum about the error message loading the Nantucket scene, I do not have the permissions on the forum to send attachments! neither in PM! Do you have another way to send my log.txt file? Thank you

Hello I bought the KACK Nantucket scenery made by "iBlueYonder" and sold by X-Aviation Every time I load XP 11.11r2, I get an error message telling me about a problem with this scene. In my log.txt, I have this: "Faulty airport ID found in custom scenery - import aborted.Read custom scenery info for: Y: \ X-Plane 11 \ Custom Scenery \ A_KACK_Nantucket Island \ Earth nav data \ apt.dat Evaluating custom path: Y: \ X-Plane 11 \ Custom Scenery \ A_KACK_Nantucket Roads \ Earth nav data \ apt.dat Did not find any airport data in this scenery. " Do you have an idea to solve this problem? Thank you